INSTRUCTIONS
MODENA WALL CLOCK
PACKAGE CONTENTS
•Clock base
•Double-sided tape
•Acrylic letter/number bases
•EVA letters/numbers
•Clock hands
•Template
•Instructions
TECHNICAL SPECIFICATIONS
•Power supply: 1.5 V AA battery (not
included)
•Material: Acrylic, EVA, plastic
•Radius: 70 cm
COMPONENTS
(1) Clock base
(2) Double-sided tape
(3) Acrylic letter/number bases
(4) EVA letters/numbers
(5) Clock hands
(6) Template
HOW TO INSTALL
•Separate all the EVA and acrylic
letters/numbers from the frame and pair
them up.
•Stick the acrylic letters/numbers onto the
EVA ones. The acrylic must be facing up.
•Stick the double-sided tape onto the
bottom side of the clock base.
•Choose a space on a wall, clean it and stick
the clock base onto it. Press for a few
seconds to make sure it sticks. Ensure
enough space around the clock base for all
the numbers and letters (at least 70 cm in
each direction).
•Use the included template (6) to arrange
and stick the letters/numbers around the
clock base, so that it resembles this
configuration (stick the EVA foam to the
wall).
•Set the clock hands onto the clock base and
fasten them with the pin included with the
hands. Set both hands to 12.
•The clock base has a white mount on the
bottom. Remove the base from the mount
(the mount must stay stuck to the wall).
You will see the clock mechanism on the
bottom side of the clock base. Insert a 1.5 V
AA battery (not included) into the battery