INSTRUCTIONS
FISH&PLAY WATER PARK
PACKAGE CONTENTS
•Plastic tub
•6 plastic ducks and fish
•A plastic scoop and a strainer
•2 fishing rods
•A palm tree with a slide
•1 scoring paper
•Stickers
TECHNICAL SPECIFICATIONS
•Power supply: 3 AA batteries (not included)
•Material: ABS
•Size: 31 × 20.5 × 33.5 cm
COMPONENTS
1. Plastic tub
2. Plastic ducks and fish
3. Plastic fences
4. Palm tree
5. Fishing rods
6. ON/OFF button
7. Music buttons
8. Scoop and a strainer
ASSEMBLING
•Use a Phillips screwdriver to open the
battery compartment on the back side of the
plastic tub (1) and install 3 AA batteries.
Mind the polarity.
•Close the compartment and tighten the
screw once the batteries are installed.
•Take the stickers and stick them on the
bottom of the tub to represent the bottom
of the sea.
•Assemble the palm tree with the plastic slide
and insert it into the hole in the middle of
the island (4).
•Take the two plastic fences and insert them
into the holes on the sides of the island (3).
•Take the two fishing rods and stick them into
the holes on the sides of the tub (5).
•Pour water into the tub.
•Take the plastic ducks and fish and put them
into the water to swim freely (2).
•Press the ON/OFF button to start the water
flow (6).
•Press one of the three music buttons for a
melody to play.
PLAYING
•Your kid can use the fishing rod or the
strainer to catch ducks and fish and put them
into the two small pools on the island.
•Use the plastic scoop to pour some water
into the palm tree and watch it run down the
slide.
•Press music buttons to listen to music.
•You can even play a scoring game with your
child.