Maplin N39QJ User manual

LED Crystal Ball
N39QJ
Create an amazing lighting spectacle with this compact lighting effect. Combine green, blue
and red LEDs to create fantastic displays. Using the audio controls, the LED Crystal Ball
lighting display will dance to the beat of your music. The 6 x 3W high quality LEDs produce
superb brightness for more than 20,000 hours. The unit includes built in brackets for
optional ceiling or wall mounting.
Features:
•A compact lighting display
•Projects green, blue and red colours across the room
•Strobe, scanning and fade in/out effects
•High quality stepping motor with high torque
•Audio controls and automatic pattern modes for stand-alone use
•DMX 512 controllable
•Easy to set up
Contents:
•1 x LED Crystal Ball

Technical Specifications:
•Voltage: 90V-240V 50-60HZ (switching power supply)
•Power: 20W
•Light power: High power LED RGB 3W×6pcs
•Plug: UK mains
•Control mode: DMX512 control, Voice-activated, automatic control, strobe a variety
of modes
•DMX Channel: 6CH
Please read through this manual before use.
Important information:
•Please check the environmental voltage and the technical specifications before
installation to make sure that this product is suitable for the voltage.
•Select the best angle to install the product. In horizontal or hanging installation,
please use the suitable hanging accessories to ensure the unit is stable and safe.
•Please use the product in a ventilated and clean environment in which the humidity is
above 40%. Keep it away from any flammable or explosive materials.
•Do not look directly into the light source in order to avoid visual impairment.
•After prolonged use, remove the dome and clean the product (avoid rinsing or using
corrosive chemicals to clean the product)
•This product is not designed for continuous use. Do not exceed the time of use over
8 hours.
User Instructions:
•On the DMX512 controller, press the menu button and turn to ‘A001’.
•Then press the ‘ENTER’ button to enter into DMX512 control.
Please refer to the below table.
Channel Channel
number Functional Description
CH1
0
-
5
No strobe effect
6
-
249
LED Strobe speed from fast to slow
250-
255 No strobe effect
CH2
0
Red LED goes out
1
-
255
Red LED brightness goes from dim to bright

CH3
0
Green LED goes out
1
-
255
Green LED brightness goes from dim to bright
CH4
0
The blue LED goes out
1
-
255
Blue LED brightness goes from dim to bright
CH5
0
-
127
Motor position
128
-
191
Positive infinite rotate from slow to fast
192-
255 Reverse direction rotate from slow to fast
CH6
0
-
5
CH1 to CH5 role
6
-
55
Red light Au01 from slow to fast
56
-
105
Green light Au02 from slow to fast
106-
155 Blue light Au03 from slow to fast
156-
205 Smooth change colours from fast to slow
206-
250 Fade change colours from fast to slow
251-
255 Sound model
Display Panel Instructions
•Start up and press the “MENU” button to change Channel.
•Press the “UP” and “DOWN” buttons to select the rotation speed (1 is the
slowest, 9 is the fastest). Then press “ENTER” to confirm the mode.
Channel Rotation
Speed Functional Description
A1
1
–
9
Red Light Mode
A2
1
–
9
Green Light Mode
A3
1
–
9
Blue Light Mode
A4
1
–
9
Three Changing Colours Mode
A5
1
–
9
Seven Changing Colours Mode
A6
1
–
9
Fade Changing Colours Mode

A7
1
-
9
Strobe Mode
Channel
Modes
Function Description
51
0
-
20
Sound Strobe
52
0
-
20
Sound Change Colours