Marantz HD-AMP1 User manual

Start Here
Commencez ici
Iniciar aquí
Integrated Amplifier HD-AMP1
Quick Start Guide

1
HD-AMP1 Power cord Remote and batteries Product manual
on CD-ROM
USB cable
Before you begin
What’s In e Box
Required For Setup
Optional
Speakers
iPod/iPhone and
USB cable
Speaker cable
PC or MAC
• For more information, visit www.marantz.com
• Refer to the enclosed CD-ROM manual or Online Manual
for other functions information and operation
procedure details.
manuals.marantz.com/HDAMP1/NA/EN/
Product Name : Integrated Amplifier
Model Number : HD-AMP1

2
3/8 inch
(10 mm)
1. Connection
Connect the left and right speakers
Insert the batteries into the remote
Connect the power cord from the HD-AMP1
to a power outlet
1
23
Español Français English

3
13
2
Download the dedicated driver
from the “Download” section of the
HD-AMP1 page of the Marantz
website (http://www.marantz.
com/pages/home.aspx) onto your
PC.
Install the driver.
Unzip the downloaded le, and
double-click the exe le.
• The driver software cannot be installed correctly if your PC is connected to the unit by a USB cable.
• If the unit and your computer are connected by a USB cable and the computer is switched on before installation, disconnect the USB and restart the computer.
• Please see the FAQ at www.marantz.com if you experience any issues getting audio to play from your computer through the HD-AMP1. You may also want to check the support pages for your audio
player application.
Basic trouble shooting
Select the language to use for the
installation.
Click “OK”.
e wizard menu is displayed.
Follow the instructions on the screen.
1
2
3
4
12
When the wizard is completed,
click “Yes”.
4
2. Installing the Windows driver software
NOTE: Mac users will use the built-in driver software. No installation is required.

4
3. Enjoying your music!
Connect the HD-AMP1 to your
PC or Mac using the included
USB cable.
Power on. Press the “USB-DAC” button
on the remote.
Enjoying music from your PC or Mac
1 2 3
SETUP
RANDO REPEAT
DIMMER
BACK
POWER
VOLUME
MUTE
INFO
MODE
OPT 1 COAX
iPod/USB
OPT 2
USB-DAC
ANALOG 2ANALOG 1
SETUP
RANDO REPEAT
DIMMER
BACK
POWER
VOLUME
MUTE
INFO
MODE
OPT 1 COAX
iPod/USB
OPT 2
USB-DAC
ANALOG 2ANALOG 1
SETUP
RANDO REPEAT
DIMMER
BACK
POWER
VOLUME
MUTE
INFO
MODE
OPT 1 COAX
iPod/USB
OPT 2
USB-DAC
ANALOG 2ANALOG 1
Español Français English

5
On your PC or Mac, select the
HD-AMP1 as the current output
device.
Click the “Start” button and click
“Control Panel” on the PC.
• The control panel setting list is displayed.
Click the “Sound” icon.
• The sound menu window is displayed.
Make sure under “Playback” tab
the “HD-AMP1” is set as “Default
Device” indicated by the checkmark.
• When there is a checkmark for a different device, click
“HD-AMP1” and “Set Default”.
Select “HD-AMP1” and click
“Properties”.
• The Digital Audio Interface Properties window is
displayed.
Click the “Advanced” tab.
Click “Apply”.
Click “Test”.
• Check that audio is heard from the speakers connected to
the HD-AMP1.
Select the sampling rate and bit rate
to be applied to the D/A converter.
• It is recommended that “24 bit, 192000 Hz
(Studio Quality)” or “32 bit, 192000 Hz
(Studio Quality)” is selected.
4
1
3
5
6
2
4 7
8
Windows OS
System Requirements
• Windows 7 or 8/8.1
• Mac OS X 10.9 or 10.10
3
4
5
8
6
7

6
From the Finder, select the Utilities
menu item from the Go menu.
• The utility list is displayed.
Double-click “Audio MIDI Setup”.
• The “Audio Devices” window is displayed.
Check that “Use this device for sound
output” is checked in “HD-AMP1”.
• If a different device is checked, select and “Secondary
click” on “HD-AMP1”, and then select “Use this device
for sound output”.
Select the “HD-AMP1” format.
• It is normally recommended to set the format to
“384000.0 Hz” and “2ch-32 bit Interger”.
Click “Quit Audio MIDI Setup”.
1
4
2
5
3
Mac OS X
HD-AMP1
HD-AMP1
HD-AMP1
HD-AMP1
Use your favorite music applications
on your PC/Mac to play audio
through the HD-AMP1.
•For high resolution audio playback you will need to
obtain an advanced audio player software such as JRiver
Media Center or Audirvana.
e sampling frequency
of the music le is displayed.
5
Note
• Additional settings to output audio to the HD-AMP1 may
have to be selected in your advanced audio player application.
Please refer to the user’s manual for your application.
Español Français English

7
Enjoying music from your iOS device
Connect your iOS device to the USB
port on the front of the HD-AMP1
using the cable that came with your
iOS device.
Press the iPod/USB button
on the remote.
Use your favorite music applications
on your iOS device to play audio
through the HD-AMP1.
1 2 3
SETUP
RANDO REPEAT
DIMMER
BACK
POWER
VOLUME
MUTE
INFO
MODE
OPT 1 COAX
iPod/USB
OPT 2
USB-DAC
ANALOG 2ANALOG 1
SETUP
RANDO REPEAT
DIMMER
BACK
POWER
VOLUME
MUTE
INFO
MODE
OPT 1 COAX
iPod/USB
OPT 2
USB-DAC
ANALOG 2ANALOG 1
SETUP
RANDO REPEAT
DIMMER
BACK
POWER
VOLUME
MUTE
INFO
MODE
OPT 1 COAX
iPod/USB
OPT 2
USB-DAC
ANALOG 2ANALOG 1

8
Enjoying music from your USB storage devices
Connect your USB storage device
to the USB port on the front of the
HD-AMP1.
Press the iPod/USB button
on the remote.
After the contents of your device
are loaded, use the remote to select
something to play.
1 2 3
SETUP
RANDO REPEAT
DIMMER
BACK
POWER
VOLUME
MUTE
INFO
MODE
OPT 1 COAX
iPod/USB
OPT 2
USB-DAC
ANALOG 2ANALOG 1
SETUP
RANDO REPEAT
DIMMER
BACK
POWER
VOLUME
MUTE
INFO
MODE
OPT 1 COAX
iPod/USB
OPT 2
USB-DAC
ANALOG 2ANALOG 1
SETUP
RANDO REPEAT
DIMMER
BACK
POWER
VOLUME
MUTE
INFO
MODE
OPT 1 COAX
iPod/USB
OPT 2
USB-DAC
ANALOG 2ANALOG 1
SETUP
RANDO REPEAT
DIMMER
BACK
POWER
VOLUME
MUTE
INFO
MODE
OPT 1 COAX
iPod/USB
OPT 2
USB-DAC
ANALOG 2ANALOG 1
SETUP
RANDO REPEAT
DIMMER
BACK
POWER
VOLUME
MUTE
INFO
MODE
OPT 1 COAX
iPod/USB
OPT 2
USB-DAC
ANALOG 2ANALOG 1
SETUP
RANDO REPEAT
DIMMER
BACK
POWER
VOLUME
MUTE
INFO
MODE
OPT 1 COAX
iPod/USB
OPT 2
USB-DAC
ANALOG 2ANALOG 1
Español Français English

Printed in China 5411 11340 01AM
Copyright © 2015 D&M Holdings Inc. All Rights Reserved.