Marantz America, Inc. 1100 Maplewood Dr., Itasca, IL 60143
630-741-0300 Fax: 630-741-0301 www.marantz.com
All specifications, dimensions and weights are subject to change without notice. ©2001 Marantz America, Inc. 10/01
Sound Quality
The PM7000 delivers 95 watts per channel
power output (8 ohms), featuring Marantz's
unique Linear Drive Power Supply (LDPS). It
operates as a constant voltage supply to
effortlessly drive even exotic high-end loud-
speakers that present difficult loads.
Uniquely developed by Marantz, the
PM7000 houses shielded, fully discrete
HDAM (High Definition Amplifier Module)
output stages, with low-noise, independent
components and short signal paths. They
result in an extremely fast slew rate and
exceptional dynamic range, preserving the
dynamic structure of music enabling even
vulnerable high frequencies to be translated
accurately. The PM7000 utilizes a
symmetrical push-pull amplifier topology
which provides maximum sonic purity and
accurate imaging. Built to audiophile-quality
standards, it incorporates premium-grade
capacitors in critical signal path applications,
strengthened rigid mechanical construction
and other refinements. The PM7000 features
a source direct switch which bypasses the
tone control circuitry for the shortest signal
path, ensuring the ultimate signal purity.
Flexibility
The award winning PM7000 has seven
source inputs including moving magnet
(MM) phono input, to accommodate a wide
variety of music sources. A Record Output
Selector function allows listening to one
source while recording another. In addition,
the PM7000's tape monitor/CD-R
connections provide real-time monitoring
capability of recording quality, and a
processor loop which allows connection of
a graphic equalizer or other audio processor.
Furthermore, two sets of switchable speaker
outputs facilitate bi-wiring or multi-room
music listening and three AC convenience
outlets make it easy to hook up additional
components.
Convenience
All functions of the PM7000 can be
controlled by the supplied remote, including
volume adjustment. The PM7000's rear-
panel D-BUS connector allows integrated
operation of a complete Marantz system.
• 95 Watts Per Channel Power Output
(into 8 ohms)
• HDAM (High Definition Amplifier Module)
• Symmetrical Push-pull Amplifier
• Premium-quality Parts and Construction
• Seven Source Inputs Including Moving
Magnet (MM) Phono Input
• Remote Control Operation Including
Volume Adjustment
• D-BUS Connector for Integration With a
Complete Marantz System
• Record Output Selector Function Allows
Listening to One Source While Recording
Another
• Source Direct Switch Bypasses Tone
Control Circuitry for Maximum Signal Purity
• Processor Loop Allows Connection of a
Graphic Equalizer or Other Audio Processor
• Two Sets of Switchable Speaker Outputs
• Headphone Jack is Included for Private
Listening
• Three AC Convenience Outlets
PM7000 INTEGRATED STEREO AMPLIFIER
Features
In/Outputs
Audio Inputs
CD/TUNER/AUX1/AUX2/
CDR(MD)/TAPE/PHONO 7
Audio Outputs
CDR/MD/TAPE 3
Processor In/Out 1/1
D-Bus Connector In/Out 1
AC Outlets (switchable) 3
Specifications
Continuous Power Output (RMS) 8 Ohms
(<.03% THD, 20Hz - 20kHz) 95 + 95W
Dynamic Power (4 Ohms) 120 + 120W
Total Harmonic Distortion (8 Ohms) .03%
Damping Factor 150
Input Sensitivity/Impedance
Magnetic Phono Input 2.5 mV/47 k
Tuner/CD/Aux/Tape Inputs 150 mV/40 k
Signal to Noise Ratio
Magnetic Phono Input 85 dB
Tuner/CD/Aux/Tape Inputs 88 dB
Tuner/CD/Aux/Tape Inputs
Frequency Response (-1 dB limits, Source direct) 10Hz - 50kHz
Tone Characteristic (100Hz & 10kHz) ±8 dB
Channel Separation (1kHz/10kHz, Source Direct) >80/>70 dB
Magnetic Phono Input Accuracy of
Frequency Response to RIAA Curve 0.5 dB
General
Color Black
Front Panel Metal
Remote Control RC7000PM
Power Requirements 120V, 60 Hz, 250W
Dimensions Inches (W x H x D) 173/8" x 61/4" x 145/18"
Weight 27.2 lbs.
