Marantz PM700N User manual

Network Integrated Amplier
PM7000N
Quick Start Guide
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
РУССКИЙ
POLSKI
Kurzanleitung / Guide de démarrage rapide / Guida di Avvio Rapido /
Guía de inicio rápido / Snelhandleiding / Snabbstartsguide /
Краткое руководство пользователя / Skrócona instrukcja obsługi
Bitte zuerst lesen... / Lisez-moi en premier.... / Nota preliminare.... /
Lea esto primero.... / Lees mij eerst... / Läs detta först... /
Прочитайте в первую очередь... / Przeczytaj to najpierw....
Read Me First....
1.PM7000NN_ENG_QSG_190725.indd 1 2019/08/09 10:28:41
PrintingColor:Black

1
Thank you for choosing a Marantz network
integrated amplifier. This guide provides step-
by-step instructions for setting up your network
integrated amplifier.
Please do not return this unit to the store –
call for assistance.
If you need help… :
If you need additional help in solving problems,
contact Marantz customer service in your area.
www.marantz.com
Welcome Before You Begin
What’s In the Box
Quick Start
Guide
Power cord
Safety
Instructions
Network Integrated
Amplifier
Cautions on
Using Batteries
Remote control unit
(RC004PM)
Notes on radio R03/AAA batteries
External antennas for
Bluetooth/wireless
connectivity
Required for Setup
Speaker systems Speaker cables Router
1.PM7000NN_ENG_QSG_190725.indd 1 2019/08/09 10:28:43
PrintingColor:Black

2
Optional
TV Optical cable iOS device
Router with WPS LAN cable
• These drawings are for illustrative purposes only and may not represent
the actual product(s).
Important: External Antennas
The removable external antennas are required for both
Bluetooth and Wireless network connectivity. Please make
sure to connect the antennas before attempting to use the
Bluetooth or Wi-Fi features of the PM7000N.
nConnecting the external antennas for
Bluetooth/Wireless connectivity
For each of the two antennas:
qPlace the antenna evenly over the antenna terminal
located at the upper left or right corner of the rear
panel.
wTurn the antenna clockwise until it is fully connected.
Do not over tighten.
eRotate the antenna upwards for the best possible
reception.
COAXIAL OPTICAL
DIGITALAUDIOIN
AUDIOIN
CD AUX RECORDER
PHONO
SIGNAL
GND
ACIN
AUDIOOUT PREOUT
RECORDER SUBWOOFER
q w e
1.PM7000NN_ENG_QSG_190725.indd 2 2019/08/09 10:28:43
PrintingColor:Black

3
There are eight steps to the setup
process.
1Installing batteries in the remote control unit
2Connect the speakers to the amplifier
3Connect the TV to the amplifier (Optional)
4Plug the power cord into a power outlet
5Connect to the network
6Enjoying your music!
7Listening to sound from your TV
8Download the HEOS App
Setup 1Installing batteries in the
remote control unit
Batteries
1.PM7000NN_ENG_QSG_190725.indd 3 2019/08/09 10:28:44
PrintingColor:Black

4
2Connect the speakers to the amplifier
AUDIO IN
CD AUX RECORDER
PHONO
SIGNAL
GND
AC IN
COAXIAL OPTICAL
DIGITAL AUDIO IN
AUDIO OUT PRE OUT
RECORDER SUBWOOFER
(R)
w q
(L)
w q
Connecting the speaker cables
qPeel o about 10 mm of sheathing
from the tip of the speaker cable,
then either twist the core wire
tightly or apply solder to it.
wTurn the speaker terminal
counterclockwise to loosen it.
eInsert the speaker cable’s core
wire to all the way into the
speaker terminal.
rTurn the speaker terminal
clockwise to tighten it.
1.PM7000NN_ENG_QSG_190725.indd 4 2019/08/09 10:28:44
PrintingColor:Black

5
3Connect the TV to the amplifier (Optional)
For high-quality TV audio, connect your TV to the amplifier’s D/A input.
Connect your TV to the amplifier as shown below.
AUDIO IN
CD AUX RECORDER
PHONO
SIGNAL
GND
AC IN
COAXIAL OPTICAL
DIGITAL AUDIOIN
AUDIO OUT PRE OUT
RECORDER SUBWOOFER
OPTICAL
OUT
OPTICAL
DIGITAL AUDIO IN
• When connecting a TV to this unit, turn off the audio output of the TV’s internal speakers. See the owner’s manual of your TV for details.
1.PM7000NN_ENG_QSG_190725.indd 5 2019/08/09 10:28:44
PrintingColor:Black

6
4Plug the power cord into a power outlet
AUDIO IN
CD AUX RECORDER
PHONO
SIGNAL
GND
AC IN
COAXIAL OPTICAL
DIGITAL AUDIO IN
AUDIO OUT PRE OUT
RECORDER SUBWOOFER
Power cord
(supplied)
Connect to household
power outlet
(AC 230 V, 50/60 Hz)
1.PM7000NN_ENG_QSG_190725.indd 6 2019/08/09 10:28:45
PrintingColor:Black

7
Wired
Choose from one of the following options.
5Connect to the network
Wireless
Select “WPS Router”.
WPS router
Wi-Fi router
Select “Wi-Fi - scan” and wait as
your PM7000N looks for available
networks.
Router without
WPS button
Wi-Fi router
Power on. Select language.
(After selecting a language, please
be patient while the network
settings initialize. Expect to wait a
few minutes.)
WPS
iOS
English
Select Language
:
enter
ENTER
Wi-Fi - scan
Select Connection Method
:
cancel
:
enter
ENTER BACK
iOS device
iOS version 7
or later
WPS
iOS
Make sure your iOS device is
connected to your Wi-Fi Network.
Select the network named “Marantz
PM7000N” from the Settings/Wi-Fi
screen on your device.
Marantz PM7000N
Marantz PM7000N
1
1 2 3
3
3
WPS
iOS
WPS Router
Select Connection Method
:
cancel
:
enter
ENTER BACK
WAC - use your Apple
Select Connection Method
:
cancel
BACK
:
enter
ENTER
Power on. Select language.
(After selecting a language, please
be patient while the network
settings initialize. Expect to wait a
few minutes.)
WPS
iOS
English
Select Language
:
enter
ENTER
1
1 2
Power on. Select language.
(After selecting a language, please
be patient while the network
settings initialize. Expect to wait a
few minutes.)
WPS
iOS
English
Select Language
:
enter
ENTER
1
1 2
1.PM7000NN_ENG_QSG_190725.indd 7 2019/08/09 10:28:47
PrintingColor:Black

8
Select language.
Please wait as completing
the connection can take a
few minutes.
(The front panel of the PM7000N will
show the status of the connection.)
Press the WPS button on
your router. Within 2 minutes,
press the ENTER button.
Connect a network cable
between your PM7000N and
your router.
(cable not included)
Power on.
Please wait while your PM7000N
connects to your wired network.
Select your network name.
(If your network name is not listed,
select “Rescan”.)
Enter your network
password using the
number keys on the
remote control.
Network name
Select Network
:
back
:
enter
ENTER BACK
Enter Wi-Fi Password
:
a
:
character type
＋10 １～９
Please wait as completing...
Quick Setup
Wired
Follow the instructions
and tap Next.
Please wait as completing the connection
can take a few minutes.
(The front panel of the PM7000N will show the status of
the connection.)
Sharing the network...
Quick Setup
3
21
4
4
4
4
5
5
5
WPS
iOS
Press the WPS button...
Quick Setup
:
back
:
connect
ENTER BACK
Press the ENTER button.
Access Point 1
Wi-Fi Connected
:
back
:
next
ENTER BACK
If the signal strength
of your wireless
network is weak, to
improve reception,
please turn the
antenna on the back
of your PM7000N or
move your router to
the PM7000N.
Wi-Fi
Connected!
Connected!
AUDIOIN
CD AUX RECORDER
PHONO
SIGNAL
GND
ACIN
COAXIAL OPTICAL
DIGITALAUDIOIN
AUDIOOUT PREOUT
RECORDER SUBWOOFER
NETWORK
Marantz PM7000N
Marantz PM7000N
1.PM7000NN_ENG_QSG_190725.indd 8 2019/08/09 10:28:48
PrintingColor:Black

9
Auto-Update
Setting
Usage Data
Setting
Setup
Complete!
Turns on Auto-Update so
that future updates are
automatically downloaded and
installed when your PM7000N
is in standby mode.
On
Auto-Update
Feature updates are automatically do...
1
Select “On” to turn on
Auto-Update.
Off
Auto-Update
Feature updates are not automatically...
Select “O” to turn o
Auto-Update.
Sets the time zone that
matches the area where
you live.
Central European Tim...
Select your time zone
:
back
:
enter
ENTER BACK
2
To help us improve our
products and customer service,
Marantz collects anonymous
information about how you use
your PM7000N. Marantz will
never provide any information
we collect to third parties.
Yes
Send usage data
To help us improve our products and...
Select “Yes” to provide
information on the operating
status of this unit.
No
Send usage data
To help us improve our products and...
Select “No” to not provide
information on the operating
status of this unit.
Network Control
Setting
On
Network Control
Press ENTER to use the Marantz “HEO S”...
Off
Network Control
Press ENTER to use low power mode...
Select Network Control ON to
control PM7000N from your
smartphone, use Bluetooth/
Apple AirPlay®/HEOS App and
maintain constant network
access. Power Consumption
during standby power will be
slightly higher.
Select Network Control OFF
to reduce power consumption
during standby. You can not
turn on your PM7000N from
your smartphone or use
Bluetooth/Apple AirPlay/HEOS
App until your PM7000N
is powerd on manually and
connects to your network.
1.PM7000NN_ENG_QSG_190725.indd 9 2019/08/09 10:28:49
PrintingColor:Black

10
nEnjoying Internet Radio
Press INTERNET
RADIO.
Select the station you
want to play, then
press ENTER.
Select “Play Now”,
then press ENTER.
1
2
3
nEnjoying music using Apple AirPlay
Open Control Center
(iOS 7 and later) by
swiping up from the
bottom of your screen,
then tap AirPlay.
【Example】iOS 12
【Example】iOS 9
AirPlay
D
rop:
ryon
e
Select the “Marantz
PM7000N” from the
AirPlay Device list.
Marantz PM7000N
Play the song on your iPhone, iPod
touch or iPad.
1
2
6Enjoying your music!
3
1.PM7000NN_ENG_QSG_190725.indd 10 2019/08/09 10:28:49
PrintingColor:Black

11
nEnjoying music using Bluetooth
Press Bluetooth to
select Bluetooth.
When using for the first time,
the unit will go into the pairing
mode automatically and
“Bluetooth Pairing Mode” will
appear on the display of the unit.
Turn on Bluetooth fr...
Bluetooth Pairing Mode
:
cancel
BACK
Activate Bluetooth on
your mobile device. Bluetooth ON
Marantz NA6005
Bluetooth
1
2
Select “Marantz
PM7000N” from the
Bluetooth device list on
your mobile device.
Bluetooth ON
Marantz PM7000N
Bluetooth
Play music using any
app on your device.
Bluetooth ON
Marantz NA6005
Bluetooth
• To pair with other Bluetooth devices, press and hold Bluetooth on the
remote control until “Bluetooth Pairing Mode” is displayed on the unit.
3
4
1.PM7000NN_ENG_QSG_190725.indd 11 2019/08/09 10:28:51
PrintingColor:Black

12
Equipped with an automatic audio playback function. This
starts after the amplifier automatically turns on when the
power of a TV that it is digitally connected to is turned on.
To use this function, follow the steps below to turn it on.
(Default: O)
Press SETUP.
You can see the following on the
display.
Audio
Setup
:
back
:
enter
ENTER BACK
Use ui to select
“General”, then press
ENTER.
Use ui to select “TV
Input”, then press
ENTER.
1
2
3
7Listening to sound from your TV
Use ui to select “Auto-Play”, then
press ENTER.
Auto-Play (Off)
TV Input
:
back
:
enter
ENTER BACK
Use ui to select “On”, then press
ENTER.
On
Auto-Play
:
back
:
enter
ENTER BACK
Press SETUP to exit the setup
menu.
• Make sure this unit's input is set to the optical input the TV is
connected to.
• Make sure the digital output of the TV is set to PCM audio and not
bitstream, Dolby or multichannel.
4
5
6
1.PM7000NN_ENG_QSG_190725.indd 12 2019/08/09 10:28:52
PrintingColor:Black

13
8Download the HEOS App
The HEOS App lets you control your
PM7000N from anywhere in your home.
Use HEOS to explore, browse, and play
music from many online streaming services
or from your own music library.
Owner’s Manual
• For more information, visit www.marantz.com
• Refer to the Online Manual for other functions
information and operation procedure details.
manuals.marantz.com/PM7000N/EU/EN/
Online Manual
1.PM7000NN_ENG_QSG_190725.indd 13 2019/08/09 10:28:52
PrintingColor:Black

1.PM7000NN_ENG_QSG_190725.indd 14 2019/08/09 10:28:52
PrintingColor:Black

Printed in Vietnam 5411 11775 00AM
Copyright © 2019 D&M Holdings Inc. All Rights Reserved.
10. PM7000NN_QSG_BackPage_190521.indd 3 2019/08/09 10:37:02
PrintingColor:Black