Marco Ecoboiler UC45 1000744 User manual

REQUIRED
ECOBOILER
UC4
1000740
ECOBOILER
UC10
1000741
ECOBOILER
UC45
1000744
• 4, 10, or 45 litre options
• Portion dispense option
NAME
0RDER CODE
POWER
@ 230V
IMMEDIATE
DRAW OFF
CUPS (180ml)
PER HOUR
DIMENSIONS
(D x W x H mm)
PLUMBING
REQS
Ecoboiler UC4
1000740 2.4kW 4 L 133 395 x 135 x 585 3/4” BSP
Ecoboiler UC10
1000741 2.8kW 10 L 156 395 x 228 x 585 3/4” BSP
Ecoboiler UC45
1000744 5.6kW 45 L 311 495 x 420 x 667 3/4” BSP
BOILERSFONTS
NAME
ORDER CODE
DIMENSIONS
(D x W x H mm)
TAP TO COUNTER
(T mm)
Tubular Font
1000584 114 x 50 x 303 156
Tubular Font with Drip Tray
1000585 175 x 125 x 303 140
NAME
ORDER CODE
DIMENSIONS
(D x W x H mm)
TAP TO COUNTER
(T mm)
Über Font
1000811 470 x 250 x 400 295
Low Profile Über Font
1000811L 470 x 250 x 272 172
TUBULAR
FONT
1000584
TUBULAR
FONT WITH
DRIP TRAY
1000585
DIMENSIONS
• Up to 3 fonts can be used on a single boiler
(UC45 only)
• Quick and easy service for high volume
environments
ÜBER FONT
2 BUTTON
1000811
DIMENSIONS
DIMENSIONS
(LOW
PROFILE)
• Available in two heights
• Can be used with 1 or 2 undercounter boilers
H
D
W
T
H
D
W
T
H
D
W
T
SEE TABLE FOR PRODUCT DIMENSIONS
PACKAGING
NAME
ORDER CODE PACKED WEIGHT
PACKAGING
DIMENSIONS
(L x W x H mm)
QUANTITY
PER
PALLET
Ecoboiler UC4
1000740 11kg 500 x 240
x 690 10
Ecoboiler UC10
1000741 12.5kg 500 x 240
x 690 10
Ecoboiler UC45
1000744 22kg 500 x 420
x 690 4
Tubular Font
1000584 2.4kg 240 x 140
x 340 32
Tubular Font with
Drip Tray 1000585 2.4kg 240 x 140
x 340 24
Über Font
1000811 7kg 490 x 280
x 670 16
Low Profile Über
Font 1000811L 7kg 490 x 280
x 670 16
ASSOCIATED PRODUCTS (SOLD SEPARATELY)
OR OR
TUBULAR & ÜBER FONTS WITH ECOBOILER
UNDERCOUNTER WATER BOILERS

TUBULAR FONT WITH ECOBOILER UC4, UC10 & UC45
COUNTER CUT-OUT
TUBULAR FONT 1000584
TUBULAR FONT WITH DRIP TRAY 1000585
ECOBOILER UC4
1000740
ECOBOILER UC10
1000741
ECOBOILER UC45
1000741
VENTILATION REQUIREMENTS
50mm/1.9” clearance required at each side and back of
machine if installed in an enclosed cabinet.
ELECTRICAL INSTALLATION PROCEDURE
When installing the machine, always observe the local
regulations and standards. The standard machine is
supplied with a UK 3-pin plug. For EU models a 2-pin CEE-7
plug will be supplied. US models will be supplied with the
suitable plug. A suitable mains power supply socket should
be available within easy access of the appliance so that it
can be disconnected easily after install. The wires from the
font are terminated in a Mini Fit connector which will plug
into a similar Mini Fit connector mounted on the top lid of
the undercounter boiler.
PLUMBING INSTALLATION PROCEDURE
• Ensure that the equipment is installed according to local
plumbing & water regulations.
• Mains water pressure required (limits): 14.5 - 145psi
(100 - 1000kPa, 0.1 - 1MPa).
• Requires inline water filter within your water
specifications.
• The machine is supplied with a 3/4“ BSP connection.
• Turn on the water to flush any impurities, dust etc
from the inlet hose and water pipe. Allow several litres
through. Especially for new installations. Connect the
hose to the inlet valve of the boiler. Make sure a sealing
washer is fitted.
• Turn on water and check for leaks.
• If font does not offer a vent connection (Tubular Font
only) then on no account must Vent/Overflow be
connected direct to a drain, if connected to a drain you
MUST use a Tundish or Ensure an air break failure to do
this will result in boiler contamination.
• This equipment must be installed with adequate
backflow protection to comply with all applicable
federal, state and local codes.
OPERATING BOILER FOR THE FIRST TIME
• Check that all installation procedures have been
carried out.
• Ensure water valve is on.
• Plug boiler appropriate electrical supply and press
power button on the front of the machine marked
‘Power’.
• The “power on” light will glow green and the machine will
fill to a safe level, above the elements, before heating.
• The “Ready/Status” light will cycle two red flashes while
the machine is filling to the safe level.
• Whilst the machine is above the safe level and filling, the
“Ready/Status” light will remain blank.
• The “Ready/Status” light will glow green when the
machine is both full and up to normal operating
temperature.
• The boiler is now ready for use.
• The font is simply activated by pressing the button on
the top of the font.
NOTE: Because the boiler is electronically controlled no
priming is necessary. The element cannot switch on until a
safe level of water is reached.
2”/50mm*
2”/50mm
* Required for ventilation
if the machine is installed
in an enclosed cabinet.
* Hosing should
be trimmed to
ensure continuous
drop from font
to boiler
23”/585mm >27.6”/700mm
15.5”/395mm
2”/50mm
11.9”/303mm
4.5”/114mm
Ø 1.3”/
32mm
Water
Power
Vent
Boiler Connections
to Font
6.3”/
161mm
min 5.1”
/130mm
6.1”/
156mm
23”/585mm
15.5”/395mm
2”/50mm
11.9”/303mm
* Hosing should
be trimmed to
ensure continuous
drop from font
to boiler
4.5”/114mm
Ø 1.3”/32mm
Boiler Connections to Font
Water
Power Vent
2”/50mm*
2”/50mm
* Required for ventilation
if the machine is installed
in an enclosed cabinet.
>27.6”/700mm
min 5.1”/
130mm*
6.1”/ 156mm
TUBULAR FONT WITH ECOBOILER UNDERCOUNTER
WATER BOILERS
2”/50mm*
2”/50mm
* Required for ventilation
if the machine is installed
in an enclosed cabinet.
* Hosing should
be trimmed to
ensure continuous
drop from font
to boiler
23”/585mm
>27.6”/700mm
15.5”/395mm
2”/50mm
11.9”/303mm
4.5”/114mm
Ø1.3”/32mm
Water
Power
Vent
Boiler Connections
to Font
6.3”/
161mm
min 5.1”
/130mm
6.1”/
156mm
5.5”/140mm
* Required for ventilation
if the machine is installed
in an enclosed cabinet.
26.2”/667mm
19.4”/495mm
2”/50mm
11.9”/303mm
* Hosing should
be trimmed
to ensure
continuous
drop from
font to boiler
4.5”/114mm
6.3”/161mm
Ø 1.3”/32mm
Boiler Connections
to Font
Dispense 1
Font #1 Connection
Vent
Dispense 2 2”/50mm*
2”/50mm
min 5.1”/130mm
6.1”/
156mm
5.5”/140mm
2”/50mm*
2”/50mm
* Required for ventilation
if the machine is installed
in an enclosed cabinet.
* Hosing should
be trimmed to
ensure continuous
drop from font
to boiler
23”/585mm
>27.6”/700mm
15.5”/395mm
2”/50mm
11.9”/303mm
4.5”/114mm
Ø1.3”/32mm
Water
Power
Vent
Boiler Connections
to Font
6.3”/
161mm
min 5.1”
/130mm
6.1”/
156mm
5.5”/140mm

TUBULAR FONT WITH ECOSMART UNDERCOUNTER
WATER BOILERS
TUBULAR FONT WITH ECOSMART UC4, UC10 & UC45
COUNTER CUT-OUT
TUBULAR FONT 1000584
TUBULAR FONT WITH DRIP TRAY 1000585
ECOSMART UC4
1000750
ECOSMART UC10
1000752
ECOSMART UC45
1000754
VENTILATION REQUIREMENTS
50mm/1.9” clearance required at each side and back of
machine if installed in an enclosed cabinet.
ELECTRICAL INSTALLATION PROCEDURE
When installing the machine, always observe the local
regulations and standards. The standard machine is
supplied with a UK 3-pin plug. For EU models a 2-pin CEE-7
plug will be supplied. US models will be supplied with the
suitable plug. A suitable mains power supply socket should
be available within easy access of the appliance so that it
can be disconnected easily after install. The wires from the
font are terminated in a Mini Fit connector which will plug
into a similar Mini Fit connector mounted on the top lid of
the undercounter boiler.
PLUMBING INSTALLATION PROCEDURE
• Ensure that the equipment is installed according to local
plumbing & water regulations.
• Mains water pressure required (limits): 14.5 - 145psi
(100 - 1000kPa, 0.1 - 1MPa).
• Requires inline water filter within your water
specifications.
• The machine is supplied with a 3/4“ BSP connection.
• Turn on the water to flush any impurities, dust etc
from the inlet hose and water pipe. Allow several litres
through. Especially for new installations. Connect the
hose to the inlet valve of the boiler. Make sure a sealing
washer is fitted.
• Turn on water and check for leaks.
• If the overflow vent is plumbed it must be plumbed with
a tundish device.
• This equipment must be installed with adequate
backflow protection to comply with all applicable
federal, state and local codes.
OPERATING BOILER FOR THE FIRST TIME
• Check that all installation procedures have been
carried out.
• Ensure water valve is on.
• Plug boiler appropriate electrical supply and press
power button on the front of the machine marked
‘Power’.
• The “power on” light will glow green and the machine will
fill to a safe level, above the elements, before heating.
• The “Ready/Status” light will cycle two red flashes while
the machine is filling to the safe level.
• Whilst the machine is above the safe level and filling,
the “Ready/Status” light will remain blank.
• The “Ready/Status” light will glow green when the
machine is both full and up to normal operating
temperature.
• The boiler is now ready for use.
• The font is simply activated by pressing the button on
the top of the font.
NOTE: Because the boiler is electronically controlled no
priming is necessary. The element cannot switch on until
a safe level of water is reached.
2”/50mm*
2”/50mm
* Required for ventilation
if the machine is installed
in an enclosed cabinet.
* Hosing should
be trimmed to
ensure continuous
drop from font
to boiler
23”/585mm >27.6”/700mm
15.5”/395mm
2”/50mm
11.9”/303mm
4.5”/114mm
Ø 1.3”/
32mm
Water
Power
Vent
Boiler Connections
to Font
6.3”/
161mm
min 5.1”
/130mm
6.1”/
156mm
23”/585mm
15.5”/395mm
2”/50mm
11.9”/303mm
* Hosing should
be trimmed to
ensure continuous
drop from font
to boiler
4.5”/114mm
Ø 1.3”/32mm
Boiler Connections to Font
Water
Power Vent
2”/50mm*
2”/50mm
* Required for ventilation
if the machine is installed
in an enclosed cabinet.
>27.6”/700mm
min 5.1”/
130mm*
6.1”/ 156mm
2”/50mm*
2”/50mm
* Required for ventilation
if the machine is installed
in an enclosed cabinet.
* Hosing should
be trimmed to
ensure continuous
drop from font
to boiler
23”/585mm
>27.6”/700mm
15.5”/395mm
2”/50mm
11.9”/303mm
4.5”/114mm
Ø1.3”/32mm
Water
Power
Vent
Boiler Connections
to Font
6.3”/
161mm
min 5.1”
/130mm
6.1”/
156mm
5.5”/140mm
* Required for ventilation
if the machine is installed
in an enclosed cabinet.
26.2”/667mm
19.4”/495mm
2”/50mm
11.9”/303mm
* Hosing should
be trimmed
to ensure
continuous
drop from
font to boiler
4.5”/114mm
6.3”/161mm
Ø 1.3”/32mm
Boiler Connections
to Font
Dispense 1
Font #1 Connection
Vent
Dispense 2 2”/50mm*
2”/50mm
min 5.1”/130mm
6.1”/
156mm
5.5”/140mm
2”/50mm*
2”/50mm
* Required for ventilation
if the machine is installed
in an enclosed cabinet.
* Hosing should
be trimmed to
ensure continuous
drop from font
to boiler
23”/585mm
>27.6”/700mm
15.5”/395mm
2”/50mm
11.9”/303mm
4.5”/114mm
Ø1.3”/32mm
Water
Power
Vent
Boiler Connections
to Font
6.3”/
161mm
min 5.1”
/130mm
6.1”/
156mm
5.5”/140mm