Marco Kyndall Laine Home 5FS29-G User manual

3-Tier Floating Shelf
Aquarium Stand
Customer Service: Toll Free: 1-888-627-2601 (Monday - Friday, 8:30 AM to 4:30 PM CST
Marco Group Inc., 5400 Doniphan Drive, Neosho, MO 64850
29 Gallon
Model# 5FS29-G
ASSEMBLY INSTRUCTIONS
HOME

2
BEFORE BEGINNING ASSEMBLY:
Please review the Parts List to ensure you have all the parts shown here. If you nd missing or broken parts, or
are in need of assembly guidance, call toll free, 1-888-627-2601 and we’ll be happy to help.
PLEASE DO NOT RETURN THIS MERCHANDISE TO THE STORE.
M6 x 12 Bolt (x8)
Horizontal
Shelf Support (x4)
Side Leg Frame (x2)
Wood Shelf (x2)
Top Wood Shelf (x1)
M6 x 25 Bolt (x20)
Allen Wrench
PARTS LIST
HARDWARE PACK
A
B
C
E
F
G
LIMITED WARRANTY
This aquarium stand is under warranty by Marco Group, Inc. against defects in material and workmanship for 90 days from the
date of purchase. If any component of the stand is found to be defective, you may contact us for replacement provided that it has
not been modied, damaged or misused. (Proof of date of purchase must be provided).
THIS WARRANTY IS VOID if the aquarium stand is modied, if it is not placed on a at, level surface, if it is used with a tank other
than it is designed, if it is moved with the tank in place or if it is used for other than it’s intended purpose.
This warranty is limited to replacement of the stand only. Warranty does not cover loss of sh, personal injury, property loss
or damage arising out of use of the aquarium stand. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specic rights and you
may have other rights that vary from state to state.
D

3
ATTACH METAL
FRAME SUPPORT
Attach (4) Horizontal Shelf Supports to the (2) Side Leg
Frames as shown here. The Supports will slide onto the
metal ears and are secured in place with (8) bolts “A”.
Tighten using the supplied Allen Wrench.
ATTACH TOP
WOOD SHELF
Attach Top Wood Shelf by
placing onto metal frame
and lining up pre-drilled
holes on the underside of
top with the holes in the
frame. Secure in place with
(8) bolts “B” and tighten
using the supplied Allen
Wrench.
E
D
D
E
E
E
G
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B

©2021 Marco Group Inc.
ATTACH MIDDLE
AND BOTTOM
SHELVES
Following the same procedure
as with the Top Shelf, secure
each of the below shelves
using (6) bolts “B” for each
shelf. Tighten with the Allen
Wrench.
ASSEMBLY OF
YOUR NEW STAND
IS NOW COMPLETE!
B
B
B
B
B
B
B
B
B
B
B
B
F
F
CARE & MAINTENANCE
• Clean furniture with a soft cotton cloth moistened with water.
• DO NOT use abrasives.
• DO NOT leave water on any of the stand’s surfaces. Always
wipe spilled water from the stand. Water, for prolonged
periods, could damage the stand’s surface.
IMPORTANT SAFETY INFORMATION
Please read all the following information before assembling and using your aquarium stand.
THIS PRODUCT IS NOT A TOY – NEVER allow small children to touch, climb on or play with aquarium or aquarium stand. Serious injury or death could result.
WHERE TO PLACE YOUR AQUARIUM
Use only an aquarium stand designed to support the weight and size of your aquarium. The filled weight of an aquarium is approximately 10 to 12 pounds per
gallon. This stand is designed only for use on level surfaces. Failure to place your stand on a level surface could cause the aquarium to leak, crack or even tip or
fall. Never tip the stand from the upright position.
MOVING YOUR AQUARIUM STAND
Always position the stand in the desired location before putting the aquarium tank in place. Never attempt to move the stand with the aquarium in place.
Never remove an aquarium tank from the stand unless the aquarium tank is completely empty. Never carry the stand by the top.