Marea SMART B57002 User manual

Smart Bracelet B57002
User Manual

1
Welcome to use smart bracelet, the high-
performance wrist-band smart bracelet will
create the intimate fitness experience for you.
Maintenance
Please remember the following tips in terms ofsmart
bracelet maintenance:
·Clean the smart bracelet regularly, especially the inner
side of it, and keep it dry.
·Adjustthe tightnessofsmart bracelet toensureair
circulation.
·Excessive skincare product is undesirable on wrist with a
smart bracelet on.
·Pleaseceasewearingthesmartbraceletincaseof skin
allergyor any discomfort.
Charging
1. Contact the metal contact
on the back of the smart
bracelet with the charger
clamp and insert the other
end of the charger into the
USB charging point or
computerUSBinterface.
2. We can see on the
screen that it is being
charged

2
Downloading and Binding of Smart bracelet APP
1. Schematic diagram of main body of smart bracelet
2. Power-on
We can hold the touch button for 5 seconds or plug in
the charging clamp to charge the smart bracelet.
3. Download and install APP
1>Scan QR code with mobile
phone and download APP.
2>For IOS system, we can select APP
store; for Android system, we can select
Application Treasure to download and
install PubuFit.
Note: Your mobile phone must support
Android 5.1 or IOS8.0 or above, and Bluetooth
4.0 or above.
4. Check mac address
You can get the smart bracelet MAC by
holding the main interface for two
seconds. MAC address, used to indicate
the hardware address of smart bracelet,
is the only sign of the smart bracelet and
cannot be modified. If you check the
smart bracelet with mobile phone, you

3
can find the corresponding smart bracelet by checking the
MAC number. The MAC address is used to identify the
smart bracelet and connected to the mobile phone quickly.
5. Smart bracelet binding by APP
1. Switch
to the
home
page and
click
"ADD" or
"ADD A
DEVICE"
2. Choose
your
device in
the device
list
scanned.
3. ForIOSsystem,
therewillbe
Bluetooth Pairing
Request and you
can click Bluetooth
"Pairing" to confirm;
connect it directly
for Android system.
4. Successf
ul
binding
.
For Android, we can disconnect it from the phone by
clicking on the Remove Device. For some particular model
of mobile phone, after it is unbound, it is necessary to click
set up- Bluetooth- paired device- canceling the pairing.
After IOS is unbound, you need to click set up- Bluetooth,
click on the symbol on the right, and choose to ignore the
device
.

4
Introduction of smart bracelet features
Start-upstatus
Click the touch sign to switch the menu interfaces of main
screen, as shown in the following interfaces;

5
1. Introduction of main interface
functions After the smart bracelet
and APP are first paired, itwill
synchronize the time, date, steps,
and calorie symbols of the phone.
2. Counting of steps, distance and
calorie The step-counting interface
shows steps. With the smart
bracelet on wrist, it can count steps,
distance and calories automatically.
3. Sleepmonitoring
With the smart bracelet at night, it can automatically
determine whether users are in the sleep state, record deep
sleep and shallow sleep respectively, and summarize sleep
time
to help users monitor their sleep
quality. It can measure quality of
sleep by
the range and frequency of wrist
movements as you sleep.
Note: Because sleep time and habits are different for
different people, the time of sleep monitoring is only for
reference.
4. Heart rate measurement
If you hold the touch area for two
seconds, it begins to measure the heart
rate according to the real-time heart rate
of the human body. After one minute, it
stops automatically, records the last value, and feeds back

6
to the main interface. It will distinguish between high and
low heart rates based on the last heart rate value for the
second time.
4.1 The heart rate sensor shall be closely attached to and
well contacted with skin in measurement of heart rate. If
the smart bracelet is too loose, the sensor light will
expose, which can result in inaccurate measurement. It is
prohibited to look steadily at the green lightof sensor;
otherwise, itmay make eyes uncomfortable.
4.2 The user has to keep sitting still though the device is
used for measuring heat rate in a real-time and dynamic
way; otherwise, the time for measurement of heart rate
will be delayed or no data can be measured. The user
should not move until the smart bracelet measures the
value and then he can check the data of real-time
dynamic heart rate.
4.3 It is necessary to measure heart rate after a rest if
there is a big difference in measured data. The average
value obtained through five times of consecutive
measurement is more accurate.
4.4 The device is used to measure heart rate in a real-
time and dynamic way, so the heart rate is varied with
different conditions such as speaking, dining and
drinking. It shall be subject to the actual case.
4.5 Be sure that there is no dirt at the bottom of the heart
rate sensor during measurement. Skin color, hair
density, tattoo and scar may affect the accuracy of the
measured results, in which cases itis necessary to re-
measure the heart rate.
5. Sport modes

7
In the sports interface, you can enter the sports mode
after holding the touch button for two seconds. There are
seven kinds of sports, including walking, running, cycling,
rope skipping, badminton, basketball, football and
swimming. If you choose the "walking" mode, it will start
recording the sport parameters after you hold the touch
button for two seconds and you can hold the touch key
for two seconds to select "pause", "exit" or "return".
6. Blood pressure
You can click on the touch area to
switch to the blood pressure
measurement interface, hold the
blood pressure interface for 2
secondsand it will display "in
measurement". After measurement,
the motor will vibrate once and display
the current test data.
You should measure blood pressure in the quiet place
with appropriate temperature, rest for at least 5 minutes
before measurement to avoid tension, anxiety and
emotional excitement, measure blood pressure for three
times, with two minutes apart each time, and record the
average of three readings.
7. Blood oxygen

8
You can click on the touch area to
switch to the blood oxygen
measurement interface.
After you hold the blood oxygen interface
for 2 seconds, itwill display "in
measurement". After measurement, the
motor will vibrate once and display the
current test data.
Blood oxygen saturation (Sp〇2) is the percentage of the
volume of oxygen-bound hemoglobin (Hb〇2) in the
binding hemoglobin in the blood, that is, the
concentration of oxygen in the blood.
Note: The data of blood pressure and oxygen are for
reference only, and cannot be used as the basis of medical
related aspects.
8. Weather
There is information about the
current weather, sir quality and
tomorrow weather on the weather
page.
There will be weather information after it is connected with
APP, and the weather information will not be updated if it
is disconnected for a long time.
9. Message
When switching to the information interface, you can
enter the information content after holding the touch
area for 2 seconds, and then switch to the next
content after clicking the touch area, which contains
the information pushed by
the short message and chat software.
Up to five messages can be saved,

9
and in case that there are already five
messages, the message displayed
before will be replaced by new
message one by one.
Note: When entering the information content
interface, you can delete the current single message
by holding the touch area for 2 seconds.
10. Music control
Connected to the mobile phone, the
smart bracelet can control the music
player of the mobile phone. When
the mobile phone plays music, you
can use the smart bracelet tocontrol
playing/pausing, the last song and
the next song.
11. Photo control
Connected to the mobile phone, the
smart bracelet can be used as the
remote control of the mobile camera.
After opening the "Photo Control" in
APP, you can "Shake" the smart
bracelet and hold the touch button to
take photos.
12. Settings
You can hold the "Settings" interface
to enter the functional interface.

10
12.1 Brightness
regulation You can hold
the touch area
toenter"brightness
regulation", you can click
the touch key to select
brightnessand momentarily
press the side
key to return.
12.2 Stopwatch
You can hold the stopwatch
page to"start" timing, and
click "pause" timing and hold
it again to "stop" timing.
12.3 Mute
By default, mute function is in the
"closed" state, if the smart bracelet does
not need to vibrate, you can switch to the
mute interface, and hold the touch
button for two seconds to "open" or
"close" it.
12.4 Restoring the factory setting
You can hold the touch area for
over 3s to start to clear off all
messages in smart bracelet, and
restore the factory setting.
12.5 Power-off
After you hold the side key on the main
interface for 3 seconds, the power-off
interface will pop up and you can power it

11
off after holding the touch area for more
than 3 seconds.
12.6 QR code
Download PubuFit by
scanning QRl code of the
smart bracelet.
Frequently Asked Questions (FAQ)
1. Why does the smart bracelet automatically disconnect
Bluetooth when the Android screen goes out?
1> Lock Background APP. When the PubuFit process is
cleared, the smart bracelet will be disconnected from
the phone.
2 > Set APP self-startup
3 > Unrestricted Background operation, with App installed
on Android mobile phone, the background operation
is restricted intelligently by default. App should be set
manually without any restrictions.
2. Why cannot the smart bracelet receive message push?
1> You have to confirms that a switch for message push
is turned on at the phone client.

2 > You have to confirm that message can be displayed
normally in the mobile phone notification bar. The
message push on the smart bracelet is completed by
reading the message from the mobile phone notification
bar; the smart bracelet will not receive the push if there
is no message in the mobile phone notification bar.
(You need to find notification settings in the mobile
phone settings, and turn on the notification switch of
WeChat, QQ, phone, SMS and mobile phone client)
3> You have to open the auxiliary function settings of the
APP client.
3. Why can't you take a hot bath with the smart bracelet?
Answer: Bath water temperature isrelatively high, there
isalot of vapor in the gas phase, with small molecular
radius, and it can easily infiltrate into the smart bracelet
from the shell gap; when the temperature drops down, it
will condensate into liquid droplets, which will easily
cause short circuit inside the smart bracelet, damage the
circuit board, and then damage the smart bracelet.
Note: For more common questions, please refer to
PubuFit APP feedback.
Warning:
Please consult your doctor before you take part in a new
sport.
The smart bracelet should not be used for medical
purpose though it may monitor the heart rate in the real-
time and dynamic way.