Mark Fitness XM-4414 User manual

Owner’s Manual
8/09
XM-4414
Read all precautions and
instructions in this manual before
using this equipment.
FLAT BENCH
with DUMBBELL RACK

2
Before You Begin 3
Important Safety Information 4
Assembly/Exploded View 5
Parts List 6
Warranty Information 7
Table of Contents

3
MODEL: XM-4414
XM-4414
This manual will guide you through the assembly process. If at any time you
are having trouble with the assembly or use of this product, then please contact
When calling please have the following product information available:
Model Name :
Date Mfg.:
Serial #
Model Name Decal Location
Before You Start
REGISTRATION CARD
QUESTIONS?
CALL 1-800-719-4605
Monday-Friday
8:30 a.m.-5:00 p.m.
(Central Standard Time)
MAILING ADDRESS
7501 Trammel Drive
Shreveport, LA 71108
THANK YOU for making this unit a part of your exercise
program.
XMARK Fitness assures the very best in value,
appearance, durability and biomechanics.
XMARK FITNESS SERIES
XMARK Fitness
To avoid unnecessary delays in warranty parts and to insure that a permanent
record of your purchase is on file with our company, be sure to send in the war-
ranty registration card or register online at www
.xmarkfitness.com within 10 days
of purchase.
us at our
XMARK Fitness help line. We have trained service technicians on site to
take care of you, our valued customer.

NOTE: Hand tighten bolts and nylon nuts until machine is fully
assembled.
SAFETY PRECAUTIONS
SAFETY INFORMATION WARNING!
Prior to assembly, remove components from the box and verify that all the listed parts
were supplied.
Before using this unit or starting any exercise program, consult your physician.
This is especially important for persons over the age of 35 and/or persons with pre-
existing health problems. XMARK Fitness assumes no responsibility for personal
injury or property damage sustained by or through the use of this product.
It is the owner’s responsibility to ensure that all users of this unit have read the
Owner’s Manual and are familiar with safety information and precautions.
• This unit should only be used on a level surface and is intended for indoor use
only. XMARK Fitness recommends an equipment mat be placed under the unit to
protect the floor or carpet and for easier cleaning.
• Wear comfortable, good-quality walking or running shoes and appropriate cloth-
ing. Do not use this unit with bare feet, sandals, socks or stockings!
• Always examine your unit before using to ensure all parts are in working order.
• Do not leave children unsupervised near or on the unit.
• Service to your unit should only be performed by an authorized service represen-
tative, unless authorized and/or instructed by a XMARK Fitness technician. Failure
to follow these instructions will void the warranty.
Important Safety Information
4

5
Assembly
NOTE: Hand tighten bolts and locknuts until machine is fully assembled.
Prior to assembly, remove components from the box and verify that all the listed parts were supplied.
Unpack all parts and place them in a clear area. Be sure to remove all packing material.
3
1
2
2
4
4
5
5
6
7
7
7
7
8
8
A1
A1
A1
A1
A1 A1
A2
A2
A2
A2
A3
A3
B1
B1 B1
B1
B1
B1 B1
B1

XM-4414 Parts List
Parts List
6
Key NO. Part No. Description Qty
1 204029502503 MAIN FRAME, XM- 4414 1
2 204029501503 LEG BASE, XM-4414 2
3 307040000566 PAD, XM- 4414 1
4 204029599503 SEAT SUPORT, RIGHT XM- 4414 2
5 204029505503 LINK RACK XM- 4414 2
6 204029504503 DUMBBELL RACK SUPPORT XM- 4414 2
7 307010000042 SQUARE END FOOT 50 4
8 204029503503 SEAT SUPORT, LEFT XM-4414 2
A1 306010020036 BOLT, M10X20 12
A2 306010020047 BOLT, M10X70 4
A3 306010020048 BOLT, M10X75 4
B1 306010022504 LOCK NUT, M10 XM -4414 12
9 299029504500 BOLT PACK, XM- 4414 1
10 308030000293 MANUAL XM - 4414 1

XMARK Fitness
7501 Trammel Drive
Shreveport, LA 71108
Customer Service: 1-800-719-4605