Mark Fitness XM-7631 User manual

Owner’s Manual
XM-7631
8/09
AB, HYPEREXTENSION
and PREACHER CURL BENCH

Table Of Contents
Before You Start
3Important Safety Information
4
Assembly 5-8
Parts List 9
Exploded View 10
Warranty Information 11
2

NOTE: Hand tighten bolts and nylon nuts until machine is fully
assembled.
SAFETY PRECAUTIONS
SAFETY INFORMATION WARNING!
Prior to assembly, remove components from the box and verify that all the listed parts
were supplied.
Before using this unit or starting any exercise program, consult your physician.
This is especially important for persons over the age of 35 and/or persons with pre-
existing health problems. XMARK Fitness assumes no responsibility for personal
injury or property damage sustained by or through the use of this product.
It is the owner’s responsibility to ensure that all users of this unit have read the
Owner’s Manual and are familiar with safety information and precautions.
• This unit should only be used on a level surface and is intended for indoor use
only. XMARK Fitness recommends an equipment mat be placed under the unit to
protect the floor or carpet and for easier cleaning.
• Wear comfortable, good-quality walking or running shoes and appropriate cloth-
ing. Do not use this unit with bare feet, sandals, socks or stockings!
• Always examine your unit before using to ensure all parts are in working order.
• Do not leave children unsupervised near or on the unit.
• Service to your unit should only be performed by an authorized service represen-
tative, unless authorized and/or instructed by a XMARK Fitness technician. Failure
to follow these instructions will void the warranty.
Important Safety Information
3

MODEL: XM-7631
This manual will guide you through the assembly process. If at any time you
are having trouble with the assembly or use of this product, then please contact
When calling please have the following product information available:
Model Name :
Date Mfg.:
Serial #
Model Name Decal Location
Before You Start
REGISTRATION CARD
QUESTIONS?
CALL 1-800-719-4605
Monday-Friday
8:30 a.m.-5:00 p.m.
(Central Standard Time)
MAILING ADDRESS
7501 Trammel Drive
Shreveport, LA 71108
4
THANK YOU for making this unit a part of your exercise
program.
XMARK Fitness assures the very best in value,
appearance, durability and biomechanics.
XMARK FITNESS SERIES
XMARK Fitness
To avoid unnecessary delays in warranty parts and to insure that a permanent
record of your purchase is on file with our company, be sure to send in the war-
ranty registration card or register online at www
.xmarkfitness.com within 10 days
of purchase.
us at our
XMARK Fitness help line. We have trained service technicians on site to
take care of you, our valued customer.

Assembly
5

Assembly
Step 1
Attach Main Frame (#2) to Shaped Base (#1), Rear Base (#5) using:
• two M12*75 Button Head Cap Screws (#32)
• two M12*30 Button Head Cap Screws (#31)
• six Φ13*Φ26*2 Flat Washers (#37)
• two M12 Nylon Lock Nuts (#39)
NOTE: Tighten all bolts and nylon lock nuts.
6

Assembly
Step 2
Attach Foam Frame (#3), Back Pad Support (#7) to Main Frame (#2) using:
• two M12*95 Button Head Cap Screws (#33)
• four Φ13*Φ26*2 Flat Washers (#37)
• two M12 Nylon Lock Nuts (#39)
Attach Frame Adjustable Back Pad (#6) to Back Pad Support (#7) using:
• one M12*125 Button Head Cap Screw (#34)
• two Φ13*Φ26*2 Flat Washers (#37)
• one M12 Nylon Lock Nut (#39)
NOTE: Tighten all bolts and nylon lock nuts. Be sure the Back Pad Support (#7)
can move easily.
7

Assembly
Step 3
Attach Upper Back Pad (#9), Lower Back Pad (#10) to Frame Back Pad Support (#7) using:
• four M10*55 Button Head Cap Screws (#30)
• four Φ11*Φ20*1.5 Flat Washers (#36)
Attach Arm Curl Pad (#8) to Adjust Frame (#4) using:
• two M10*30 Button Head Cap Screws (#29)
• two Φ11*Φ20*1.5 Flat Washers (#36)
Attach two Foam (#17) to Foam Frame (#3) using:
• two Plastic Washers (#22)
• two Metal End Caps (#26)
NOTE: Tighten all bolts and nylon lock nuts.
8

Parts List
XM-7631 Parts List
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
1
1
1
1
1
1
1
1
1
1
1
6
2
2
2
2
2
2
2
1
3
2
2
4
2
2
12
2
2
4
2
2
2
2
16
6
14
2
6
1
1
1
1
P00709
P00710
P00711
P00712
P00247
P00645
P00713
P00067
P00048
P00714
P00203
P00573
P00152
P00155
P00153
P00154
P00061
P00138
P00584
P00413
P00304
P00140
P00030
P00004
P00715
P00062
P00636
P00716
P00598
P00606
P00717
P00624
P00629
P00621
P00136
P00031
P00035
P00564
P00562
P00560
P00022
H00042
M00042
Shaped Base, XM-7631
Main Frame, XM-7631
Foam Frame, XM-7631
Adjust Frame, XM-7631
Rear Base, XM-7604
Frame, Adjustable Back Pad
Frame Back Pad Support XM-7631
Arm Curl Pad
Upper Back Pad XM Series
Lower Back Pad XM Series
Pop Pin XM Series
Iron Bushing, 25*12.2*8
Foot Cap 2, Right 50.8*76.2, XM Series
Foot Cap, Left 50.8*76.2 XM Series
Foot Cap, Right 50.8 XM Series
Foot Cap, Left 50.8 XM Series
Foam
Glide Sleeve
Small Grips
Nylon Spacer
Plug, 30*60 XM-7616
Plastic Washer
Wheel
Spacer
Bumper
Metal End Cap
Button Head Cap Screw M8*25
Button Head Cap Screw M8*45
Button Head Cap Screw M10*30
Button Head Cap Screw M10*55
Button Head Cap Screw M12*30
Button Head Cap Screw M12*75
Button Head Cap Screw M12*95
Button Head Cap Screw M12*125
Flat Washer Φ9*Φ16*1.6
Flat Washer Φ11*Φ20*1.5
Flat Washer Φ13*Φ26*2
Nylon Lock Nut M8
Nylon Lock Nut M12
Hex Key S6
Wrench 17-19
Hardware
Owner's Manual
Ref # Part # Description Qty
9

Exploded View
10

XMARK Fitness
7501 Trammel Drive
Shreveport, LA 71108
Customer Service: 1-800-719-4605