Marley ONE FOUNDATION BT User manual

ONE FOUNDATIONTM BT

ONE FOUNDATION
DIGITAL AUDIO SYSTEM
WELCOME TO THE HOUSE OF MARLEY
We are honored you have selected One Foundation
to become part of your music experience. The One
Foundation is a two-way, stereo sound system which
works with Bluetooth® devices connected wirelessly
and hundreds of other devices via the auxiliary,digital,or
analog inputs. One Foundation fuses striking aesthetics
with a powerful audio engine and brings realism and
detail to your favorite music and movies. High-definition,
long-throw, wood-fiber impregnated, 5.25-inch woofers
in a tuned, bass-reflex enclosure, Danish designed
1-inch tweeters and over 200 watts come together to
deliver amazing sonic experiences in this beautifully
engineered, crafted work of art.
EVERYTHING YOU NEED
One Foundation comes with the following items:
Sound System
Remote 3.5mm Stereo
Cable
Power Cord for
Wall Outlet
EN

POWERING ONE FOUNDATION
Your One Foundation uses a built-in power supply and is
powered by a standard wall outlet.
1. Insert the AC power cord into One Foundation.
2. Insert the wall plug into an appropriate wall outlet.
1
2

EASY TO USE
One Foundation uses one convenient control dial to operate
power, volume, and input selection.
- Press the control dial once to turn One Foundation on
- Press the control dial again while One Foundation is on
to cycle through active inputs
- Turn the control dial to adjust volume
- Press and hold control dial to turn One Foundation off
HOLD: OFF
PRESS: TURN ON & CHANGE INPUT

REMOTE
- Input/ Pair ( ): Cycle through connected inputs or
press and hold to engage Bluetooth Pairing Mode
- Power ( ): On/Off
- Volume Up ( ): On/Off
- Volume Down ( ): Press or hold On/Off
- Play/Pause ( ): Press or hold Play/Pause track
- Fast Forward ( ): Press for next track, press and
hold for fast forward (for Bluetooth source)
- Rewind ( ): Press for previous track, press and hold
for rewind (for Bluetooth source)
POWER ON/OFF
INPUT/ PAIR
VOLUME UP
VOLUME DOWN
PLAY/PAUSE
FAST FORWARD
REWIND

CONNECTING YOUR DEVICE VIA BLUETOOTH®
PAIRING MODE (BLINKING BLUE LED)
One Foundation automatically goes into Bluetooth
Reconnect Mode for 10 seconds as soon as you turn it
on (fast flashing BLUE led). It then switches to Pairing
Mode (slow flashing BLUE led). You can pair a new
device to One Foundation when in Pairing Mode.
NOTE: Holding the on the One Foundation remote
for 3 seconds will disconnect the device currently
connected and put One Foundation into Pairing Mode.
Pairing mode can also be engaged by disconnecting a
connected device or by pressing the Pair on the back
of One Foundation.
CONNECTED MODE (SOLID BLUE LED)
Use your Bluetooth-enabled device to pair to One
Foundation. One Foundation does not require a pairing
password. Once paired, the LED will glow solid blue.
NOTE: One Foundation will automatically pair with the
last device connected to it when turned ON (when the
device is available).
CONNECTING OTHER DEVICES
The various inputs on the back and right side of One
Foundation allow you to connect other devices to the
system.
• For connecting analog devices, use the RCA input on
the back or the auxiliary input on the side.
• For connecting digital devices we recommend using
the digital audio (optical) input for the highest sound
quality.
USB CHARGING PORT
Use this port for charging up your iPod®, smartphone,
or tablet. The port is always active when One
Foundation is plugged into a wall outlet.

LABEL: PANTONE BLACK 7C
TYPE: PANTONE COOL GRAY 2C
BLUETOOTH BLUE: PANTONE 286C
DIGITAL IN RED: PANTONE RED C
RCA RINGS:
PANTONE WHITE C
PRE-OUT
RCA ANALOG
RCA ANALOG For use with analog sources
PRE-OUT Recommended for use with active subwoofer (not included).
DIGITAL (OPTICAL)
BLUETOOTH PAIR
AUX
USB POWER
Port for charging devices (including most tablets)USB POWER
Recommended for use with digital peripherals. Peripheral must be connected and turned on in order to cycle to this input.DIGITAL (OPTICAL)
This mode can also be initiated by pressing and holding the [INPUT] button on the remote.
BLUETOOTH PAIR
This input will be triggered automatically when a 3.5mm auxiliary cable (included) is plugged into One Foundation.
AUX
LABEL: PANTONE BLACK 7C
TYPE: PANTONE COOL GRAY 2C
BLUETOOTH BLUE: PANTONE 286C
DIGITAL IN RED: PANTONE RED C
RCA RINGS:
PANTONE WHITE C
PRE-OUT
RCA ANALOG
RCA ANALOG For use with analog sources
PRE-OUT Recommended for use with active subwoofer (not included).
DIGITAL (OPTICAL)
BLUETOOTH PAIR
AUX
USB POWER
Port for charging devices (including most tablets)USB POWER
Recommended for use with digital peripherals. Peripheral must be connected and turned on in order to cycle to this input.DIGITAL (OPTICAL)
This mode can also be initiated by pressing and holding the [INPUT] button on the remote.
BLUETOOTH PAIR
This input will be triggered automatically when a 3.5mm auxiliary cable (included) is plugged into One Foundation.
AUX
LABEL: PANTONE BLACK 7C
TYPE: PANTONE COOL GRAY 2C
BLUETOOTH BLUE: PANTONE 286C
DIGITAL IN RED: PANTONE RED C
RCA RINGS:
PANTONE WHITE C
PRE-OUT
RCA ANALOG
RCA ANALOG For use with analog sources
PRE-OUT Recommended for use with active subwoofer (not included).
DIGITAL (OPTICAL)
BLUETOOTH PAIRAUX
USB POWER
Port for charging devices (including most tablets)USB POWER
Recommended for use with digital peripherals. Peripheral must be connected and turned on in order to cycle to this input.DIGITAL (OPTICAL)
This mode can also be initiated by pressing and holding the [INPUT] button on the remote.
BLUETOOTH PAIR
This input will be triggered automatically when a 3.5mm auxiliary cable (included) is plugged into One Foundation.
AUX
( )
( )

IMPORTANT SAFETY INSTRUCTIONS
1. Follow and keep these instructions.
2. Heed all warnings.
3. Do not use this apparatus near water.
4. Clean only with a dry cloth.
5. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
6. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
7. Protect the power cord from being walked on or
pinched particularly at plug, convenience receptacles,
and the point where they exit from the apparatus.
8. Only use attachments/accessories specified by the
manufacturer.
9. Unplug this apparatus during lightning storms or when
unused for long periods of time.
10. Refer all servicing to qualified service personnel
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
11. To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
WEEE EXPLANATION
This marking indicates that this product should
not be disposed with other household wastes
throughout the EU. To prevent possible harm to
the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To return your
used device, please use the return and collection systems or
contact the retailer where the product was purchased. They
can take this product for environmental safe recycling.
BATTERY DIRECTIVE
This symbol indicates that batteries must not
be disposed of in the domestic waste as they
contain substances which can be damaging to
the environment and health. Please dispose of batteries in
designated collection points.
WARNING
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD.
This product contains a coin/button cell battery.
If the coin/ button cell battery is swallowed, it can cause
severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the
battery compartment does not close securely, stop using the
product and keep it away from children. If you think batteries
might have been swallowed or placed inside any part of the
body, seek immediate medical attention.

FCC STATEMENT
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician
for help.
FCC RADIATION EXPOSURE STATEMENT
This device complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This device complies
with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
CAUTION
Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
CANADA STATEMENT
This device complies with Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including
interference that may cause undesired operation of the
device.