Marshall Electronics V-R573P User manual

Marshall
Marshall Marshall
Marshall V-R573P Instruction Sheet
Broadcast Multimedia Division http://www.LCDRacks.com e-mail: [e-mail]
The V-R573P is a rack mounted unit that has three independently controlled 5.7” active matrix LCD
panels with loop-through capability. This unit also has a unique feature that allows the unit to tilt up or
down for optimum viewing angle. The unit fits into a EIA standard 19” rack, three rack spaces high.
Each of the three screens has individual front mounted selector buttons with LED’s and color, tint,
brightness and contrast controls. Each screen has two composite video NTSC/PAL inputs with loop-
through and a built-in color bar generator.
The operation of the V-R573P is fairly straight forward. However, it is important to take note of
the following:
1. Each LCD Panel comes with a protective plastic film that must be removed by carefully lifting
the film from the corner and peeling it off. Be certain not to apply any pressure on the LCD
panels, they are fragile and can break. Scratched, cracked or broken LCD screens are not
covered by our warranty.
2. The V-R573P uses 12VDC, 2.0amp regulated power. Be certain that these specifications are
met when using a power supply other than the one supplied to you by Marshall Electronics.
3. The polarity configuration for the V-R573P is indicated on the rear panel of the unit. Any
battery operation of the V-R573P must have this polarity configuration.
4. The video inputs on the rear of the panel are 75 Ohm self-terminated. The loop-through
feature uses active components and is always active as long as power is supplied to the unit
regardless of the monitor being ON or OFF.
Rear View Side View
Display Active Area Dot Pitch Picture
Elements Inputs Color Bars Dimensions Power Consumption
5.7" LCD
Active Matrix
115.2mm x
86.2mm Per
Panel
0.18mm x
0.18mm 640 x 480 Per Panel 2 Composite Built In 18.96W x 5.2H x 2.5D 12 VDC 2.0 Amps

Marshall
Marshall Marshall
Marshall V-R573P Instruction Sheet
Broadcast Multimedia Division http://www.LCDRacks.com e-mail: [e-mail]
PINS 4, 9 AND 14 ARE COMMON GROUNDS
Green Red Yellow
Monitor 1 Pin 11 Pin 12 Pin 13
Monitor 2 Pin 6 Pin 7 Pin 8
Monitor 3 Pin 1 Pin 2 Pin 3
Warranty
Marshall Electronics warranties to the first consumer, that this V-R573P rack mount monitor will,
under normal use, be free from defects in workmanship and materials, when received in its
original container, for a period of one year from the purchase date.
This warranty is extended to the first consumer only and proof of purchase is necessary to honor
the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics
reserves the right, not to honor the warranty set forth above. Therefore, labor and parts may be
charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or
handling, improper alterations or modifications in design or construction, voids this warranty.
No sales personnel of the seller, nor any other person is authorized to make any warranties other
than those described above, or to extend the duration of any warranties on behalf of Marshall
Electronics, beyond the time period described above.
Due to constant effort to improve products and product features, specifications may change
without notice.