Marshall Headphones STANMORE User manual

STANMORE - ACTIVE STEREO LOUDSPEAKER
WWW.MARSHALLHEADPHONES.COM
001. SAFETY INSTRUCTIONS
002. SAFETY LABELS
003. LANGUAGE INDEX
005. THE STANMORE
008. BOX CONTENTS
010. GENERAL DESCRIPTION
012. TURNING THE POWER ON/OFF
014. USING THE STANMORE WITH
YOUR DEVICES
015. CHOOSING YOUR SOURCE
016. BLUETOOTH CONNECTION
020. CABLE CONNECTION
021. INPUT 1 - 3.5MM STEREO PLUG
022. INPUT 2 - RCA PORTS
023. OPTICAL AUDIO
024. STANDBY MODES
026. ADJUSTING SOUND
027. TECHNICAL INFORMATION
028. TROUBLE SHOOTING
000. WARRANTY INFO
USER MANUAL

IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
001. Read these instructions – All the safety and operating instructions should be read before this
product is operated.
002. Keep these instructions – The safety and operating instructions should be retained for future
reference.
003. Heed all warnings – All warnings on the appliance and in the operating instructions should be
adhered to.
004. Follow all instructions – All operating and use instructions should be followed.
WARNING!
005. WARNING – To reduce the risk of re or electric shock, do not expose this apparatus to rain or
moisture. The apparatus shall not be exposed to dripping or splashing and that objects lled with liquids,
such as vases, shall not be placed on apparatus.
006. WARNING – do not cover.
007. WARNING – only use attachments/accessories specied by the manufacturer (such as the
exclusive supply adapter, battery etc).
008. WARNING – the plug is the main disconnect device and should be used as such. The
disconnect device should remain readily accessible.
009. WARNING – this active loudspeaker may emit high sound pressure levels.
010. WARNING – do not listen too close to the active loudspeaker.
011. WARNING – do not listen for an extended period of time at a high sound pressure level.
012. WARNING – do not attempt to remove the active loudspeaker chassis, there are no user
serviceable parts.
013. WARNING – do not plug your guitar into the Hanwell.
014. WARNING – do not insert body parts or objects into the bass port for risk of injury.
015. DANGER – of dropping the product.
016. DANGER – of sharp corners.
MOISTURE AND HUMIDITY
017. The active loudspeaker should be located in a place free from moisture and water.
018. Do not use this apparatus near water. Do not expose it to rain or dripping water. Do not splash
water on it.
INSTALLATION
019. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
020. No naked ame sources, such as lighted candles, should be placed on the active loudspeaker.
021. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
022. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
CONNECTION
023. Connect the active loudspeaker according to the instructions in the manual.
024. Connect the active loudspeaker only to the correct mains voltage as shown on the equipment.
025. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit the apparatus.
026. Use only power sources of the type specied in the operating instructions or as marked on
the active loudspeaker. Do not substitute the separate power supply included with this active loud-
speaker with any other power supply – use only the power supply provided by the manufacturer.
027. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t
into your outlet, consult an electrician for replacement of the obsolete outlet.
028. Unplug this apparatus during lightning storms or when unused for long periods of time.
029. Do not install in an area that impedes access to the power plug. Disconnecting the power plug is
the only way to completely remove power to the product and the plug must be readily accessible at all times.
CLEANING
030. Clean only with dry cloth.
MAINTENANCE
031. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
032. CAUTION: These servicing instructions are for use by qualied service personnel only. To
reduce the risk of electric shock, do not perform any servicing unless you are qualied to do so.
Apple TV, Airport Express, iPhone, iPod, iPod Classic, iPod Nano, iPod Shuffle, iPod Touch,
iPad and Safari are trademarks of Apple Inc., registered in the U.S. and other countries.
© 2012 CSR plc and its group companies.
The AptX® mark and the AptX logo are trade marks of CSR plc or one of its group
companies and may be registered in one or more jurisdictions.

001. SAFETY INSTRUCTIONS
002. SAFETY LABELS
003. LANGUAGE INDEX
005. THE STANMORE
008. BOX CONTENTS
010. GENERAL DESCRIPTION
012. TURNING THE POWER ON/OFF
014. USING THE STANMORE WITH
YOUR DEVICES
015. CHOOSING YOUR SOURCE
016. BLUETOOTH CONNECTION
020. CABLE CONNECTION
021. INPUT 1 - 3.5MM STEREO PLUG
022. INPUT 2 - RCA PORTS
023. OPTICAL AUDIO
024. STANDBY MODES
026. ADJUSTING SOUND
027. TECHNICAL INFORMATION
028. TROUBLE SHOOTING
000. WARRANTY INFO
ENGLISH
SECTIONS
FRENCH
PAGE 000
JAPANESE
PAGE 000
GERMAN
PAGE 000
SPANISH
PAGE 000
ITALIAN
PAGE 000
002.
SAFTEY LABELS
CAUTION: To prevent the risk of electric
shock, do not remove cover (or back plate).
There are no user serviceable parts inside.
Refer servicing to qualified service personnel.
This appliance may not be treated as regu-
lar household waste. Management of WEEE
(Waste Electrical and Electronic Equipment)
is applicable in member states of the Europe-
an Union and other European countries with
individual national policies on the manage-
ment of WEEE. If you need more information
on the collection, reuse and recycling sys-
tems, please contact your local or regional
waste administration facility.
Japan PSE Mark. The product complies
with the following European directives:
The electromagnetic compatibility directive
2004/108/EC and the low voltage directive
2006/95/EC.
ETL Mark: This device complies with part
15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device
may not cause harmful interference, and (2)
this device must accept any interference re-
ceived, including interference that may cause
undesired operation.
This is Class B digital apparatus complies with
Canadian ICES-003. Cet appareil numerique de
la classe B est à la norme NMB-003 du Canada.
The product complies with the following Euro-
pean directives: the electromagnetic compatibility
directive 2004/108/EC. The low voltage directive
2006/95/EC.
This equipment is a Class II or a double-
insulated electrical appliance. It has been
designed in such a way that it does not
require a safety connection to electrical earth.
3114849
LANGUAGE INDEX

004.
STANMORE
MARSHALL IS ALL ABOUT BIG STAGE PERFORMANCE. LUCKY FOR YOU,
YOU’VE JUST BROUGHT HOME A BIT OF THAT ARENA EXPERIENCE WITH THE
STANMORE, AN ACTIVE STEREO LOUDSPEAKER PACKED WITH MARSHALL
HERITAGE AND MODERN LISTENING CAPABILITY.
WE KNOW YOU’RE EAGER TO GET IT GOING, BUT BEFORE YOU SWITCH IT
ON, MAKE SURE YOU READ THIS MANUAL CAREFULLY AND HOLD ON TO IT,
ALONG WITH THE INCLUDED WARRANTY INFORMATION IN CASE YOU EVER
NEED IT.
AS YOU’LL SOON FIND OUT, THE STANMORE PACKS A LOT OF SOUND FOR
ITS COMPACT FRAME. IT’S THE LATEST IN A GROWING LINE OF STEREO
SPEAKERS THAT BRING HOME THAT HARD AND HEAVY SOUND YOU’VE
COME TO EXPECT FROM MARSHALL. WHAT’S MORE, IT LOOKS THE PART
TOO. STANMORE’S CLASSIC DESIGN IS A THROWBACK TO THE GOLDEN
DAYS OF ROCK’N’ROLL, WITH A VINTAGE-LOOKING FRONT FRET, BRASS
DETAILS, AND THAT ICONIC SCRIPT LOGO. SO IT WILL NEVER LOOK OUT OF
PLACE AMID THE REST OF YOUR MARSHALL COLLECTION.
THE BEAUTY OF THE STANMORE IS NOT ONLY IN ITS LOOKS, BUT ALSO
IN ITS MULTIPLE CONNECTION OPTIONS. HOOK IT UP WIRELESSLY VIA
BLUETOOTH, USE THE RCA INPUT TO PLUG IN YOUR RECORD PLAYER, OR
SIMPLY CONNECT THE COIL CORD THAT’S INCLUDED TO YOUR PHONE USING
THE 3.5MM AUXILIARY INPUT. THE STANMORE IS ALSO COMPATIBLE WITH
DEVICES WITH OPTICAL OUTPUT, LIKE APPLE TV. FIND OUT HOW TO CONNECT
YOUR DEVICES TO YOUR STANMORE FURTHER ON IN THIS MANUAL.
WE WON’T KEEP YOU ANY LONGER.
PLUG IT IN, TURN IT ON, CHOOSE YOUR MUSICAL WEAPON AND LAST BUT
NOT LEAST, TURN IT UP.

006.
STANMORE: THE BACKSTORY
SOME PEOPLE JUST HAVE IT. YOU KNOW, THAT KIND OF RAW MUSICAL
TALENT THAT MOST OF US CAN ONLY DREAM OF. JIM MARSHALL WAS ONE
OF THOSE PEOPLE. HIS MUSICAL TALENT WAS INNATE, AND HIS FATE AS
THE ‘FATHER OF LOUD’ WAS NOT TO BE HINDERED, EVEN IN THE FACE OF
A CHILDHOOD DISEASE.
AT THE AGE OF FIVE, JIM MARSHALL WAS DIAGNOSED WITH A RARE
CONDITION CALLED TUBERCULAR BONES. HE SPENT MOST OF HIS
CHILDHOOD IN A PLASTER CAST AT THE ROYAL NATIONAL ORTHOPAEDIC
HOSPITAL IN STANMORE, LONDON. FOR SEVEN YEARS, JIM LIVED IN THIS
CAST, FROM HIS ARMPITS DOWNWARDS, ONLY TO EXPERIENCE BRIEF
MINUTES OF FREEDOM WHEN THE CAST NEEDED TO BE RESIZED TO
ACCOMMODATE HIS GROWING LIMBS.
LIBERATION CAME AT THE AGE OF TWELVE WHEN JIM WAS FINALLY CUT
FREE OF THE CAST. HE WAS ENCOURAGED TO TAKE UP TAP DANCING AS A
WAY TO STRENGTHEN HIS FRAGILE BONES. HE DISCOVERED THAT HE HAD
AN INNATE SENSE OF RHYTHM, WHICH EVENTUALLY PAVED THE WAY FOR
HIS CAREER IN THE MUSIC INDUSTRY. HE STARTED OUT SINGING, AND AS
CHANCE WOULD HAVE IT, HE TOOK UP DRUMMING WHEN THERE WAS A
GAP TO FILL ONE NIGHT DURING A GIG. HIS INTEREST IN DRUMMING GREW
DEEPER, AND HE SIGNED UP FOR LESSONS TO IMPROVE HIS SKILLS.
AFTER REACHING THE TOP OF HIS DRUMMING GAME, HE BEGAN TO TEACH
THE LIKES OF MITCH MITCHELL FROM THE JIMI HENDRIX EXPERIENCE, ROD
STEWART, JIMMY PAGE AND RICHIE BLACKMORE – JUST TO NAME A FEW.
HE OPENED UP A DRUM SHOP WHERE THOSE DRUMMERS WOULD COME IN
WITH THE REST OF THEIR BANDS, AND IN A FEW TWISTS OF ELECTRICAL
FATE, THE FIRST MARSHALL AMP WAS BORN. THAT AMP GAVE
GUITARISTS A SOUND THAT WAS UNLIKE ANYTHING THEY’D EVER HEARD
BEFORE: HARDER, CRUNCHIER AND MORE RICH.
THE REST, AS YOU KNOW, IS HISTORY.

BOX CONTENTS
001. USER MANUAL & WARRANTY INFORMATION
002. DOUBLE-ENDED COIL CORD WITH 3.5MM STEREO PLUGS TO
CONNECT TO YOUR MUSIC PLAYER
003. POWER CORD
004. MARSHALL STANMORE ACTIVE STEREO LOUDSPEAKER
STANMORE
008.
CAUTION: LIFT ACTIVE
LOUDSPEAKER FROM BOTTOM.
DO NOT LIFT BY PROTECTIVE
BAG FOR RISK OF DROPPING
THE PRODUCT.
NOTE: OPTICAL AUDIO CABLE AND
RCA CABLE NOT INCLUDED WITH
THE STANMORE AND MUST BE
PURCHASED SEPARATELY.

GENERAL DESCRIPTION
001. INPUT FOR 3.5MM
STEREO PLUG
002. LED LIGHT SOURCE INDICATOR
003. VOLUME
004. BASS
005. TREBLE
006. PAIR BUTTON
007. SOURCE/WAKE BUTTON
008. POWER SWITCH
009. STANDBY MODE SWITCH
(POWERSAVER MODE AND
STANDARD MODE)
010. RCA INPUT (LEFT & RIGHT)
011. OPTICAL INPUT
012. BACK PLATE
013. BASS PORT
014. POWER JACK
015. POWER CORD
STANMORE
010.
NOTE: DATE CODE
AND SERIAL NUM-
BER STICKER
LOCATED HERE.

TURNING THE POWER ON/OFF
001. INSERT THE POWER CORD INTO THE POWER JACK.
002. CONNECT THE CORRECT POWER CORD TO THE WALL SOCKET.
STANMORE
003. TO TURN THE ACTIVE LOUDSPEAKER ON, SWITCH THE ON/OFF
SWITCH. THE LED LIGHT INDICATOR WILL FLASH RED ON THE
SOURCE MARKED AS BLUETOOTH.
004. TO TURN THE ACTIVE LOUDSPEAKER OFF, SWITCH THE ON/OFF
SWITCH. THE LED INDICATOR WILL TURN OFF.
012.
NOTE: DEPENDING ON YOUR
REGION, A POWER CORD WITH AN
APPROPRIATE PLUG IS SUPPLIED.
002.
001. 001. 002.

USING THE STANMORE WITH YOUR DEVICES
THE STANMORE IS A LOUDSPEAKER CREATED FOR TODAY’S WORLD. WITH
MULTIPLE CONNECTION SOURCES, THERE ARE LOADS OF WAYS TO
CONNECT TO YOUR SPEAKER, WHETHER VIA YOUR PHONE, TURNTABLES,
TV OR WIRELESSLY VIA THE LATEST VERSION OF BLUETOOTH®, FEATURING
APTX TECHNOLOGY®. THE ADVANTAGE OF APTX TECHNOLOGY IS THAT
THE SOUND QUALITY VIA BLUETOOTH IS SIGNIFICANTLY BETTER THAN
A2DP BLUETOOTH. BELOW YOU WILL FIND MORE DETAILS ABOUT THE
CONNECTION SOURCES, IN TWO CATEGORIES:
• WIRELESS CONNECTION VIA BLUETOOTH
• CONNECTION VIA THE 3.5MM, RCA, OR OPTICAL AUDIO CABLE
CHOOSING YOUR SOURCE
001. PUSH THE SOURCE/WAKE BUTTON TO CHOOSE YOUR SOURCE AND/OR
TO SWITCH BETWEEN CONNECTED SOURCES.
002. A LIT LED LIGHT INDICATES WHICH SOURCE YOU HAVE SELECTED.
ORDER OF CONNECTIONS (FROM TOP TO BOTTOM):
• BLUETOOTH
• OPTICAL
• INPUT 1 - 3.5MM STERO PLUG
• INPUT 2 - RCA PORTS
014.
CAUTION: MAKE SURE THAT
THE VOLUME IS SET TO LOW
ON BOTH THE ACTIVE LOUD-
SPEAKER AND THE MUSIC
PLAYER WHEN YOU START
PLAYING MUSIC.
002.

CONNECTING VIA BLUETOOTH
WITH THE HELP OF BLUETOOTH TECHNOLOGY, BLUETOOTH-COMPATIBLE
DEVICES CAN EASILY BE CONNECTED TO EACH OTHER OVER A SHORT
WIRELESS CONNECTION. USE YOUR BLUETOOTH-ENABLED SMARTPHONE,
TABLET OR COMPUTER TO STREAM MUSIC TO YOUR DIRECTLY TO YOUR
STANMORE WITH NO WIRES ATTACHED. USE YOUR NEWLY FOUND FREE-
DOM TO MOVE AROUND WITH ALL YOUR MUSIC AT YOUR FINGERTIPS.
FOLLOW THESE STEPS TO CONNECT YOUR STANMORE WIRELESSLY TO
YOUR BLUETOOTH DEVICE.
001. TURN THE STANMORE ACTIVE LOUDSPEAKER ON (SEE PAGE 010.).
002. SELECT BLUETOOTH AS SOURCE BY PUSHING THE SOURCE/WAKE
BUTTON UNTIL THE BLUETOOTH LED IS LIT.
003. ACTIVATE THE BLUETOOTH FUNCTIONALITY ON YOUR DEVICE
(SMARTPHONE, TABLET, COMPUTER).
004. PRESS THE PAIR BUTTON. THE LED LIGHT ON THE STANMORE WILL
START TO FLASH RAPIDLY IN RED.
005. ON YOUR DEVICE, SELECT THE STANMORE SPEAKER FROM
YOUR LIST. THE LED LIGHT ON THE SPEAKER WILL TURN TO A
STEADY RED.
006. YOU ARE NOW READY TO PLAY YOUR MUSIC WIRELESSLY VIA THE
STANMORE SPEAKER.
CONNECTING VIA BLUETOOTH
016.
NOTES:
• YOU ONLY NEED TO PAIR YOUR SMARTPHONE/TABLET/COMPUTER WITH THE
STANMORE ONCE, AFTER WHICH THE DEVICE WILL BE INCLUDED IN THE LIST OF
YOUR BLUETOOTH DEVICES.
• WHEN PAIRING A NEW DEVICE, PRESS THE PAIR BUTTON AGAIN, AND REPEAT
STEPS ABOVE.
• UP TO SIX DEVICES CAN BE STORED IN THE SPEAKER’S MEMORY.
004.
005.
003. 005.
002.

018.
LOCATING YOUR DEVICES VIA BLUETOOTH
SELECT BLUETOOTH AS THE INPUT SOURCE BY PRESSING SOURCE/WAKE
ON THE SPEAKER. BLUETOOTH IS NOW ACTIVATED, WITH A FLASHING
RED LIGHT IF NO DEVICE IS CONNECTED, AND A SOLID RED LIGHT IF
A DEVICE IS CONNECTED. STANMORE SPEAKER WILL NOW AUTOMATI-
CALLY SEARCH FOR PAIRED DEVICES FOR 3 MINUTES, AND THE LED WILL
RAPIDLY FLASH RED DURING THE SEARCH. THE STANMORE SPEAKER WILL
LOCATE DEVICES WITHIN RANGE THAT HAVE PREVIOUSLY BEEN CON-
NECTED AND WILL CONNECT THEM AUTOMATICALLY. IF NO DEVICES ARE
LOCATED WITHIN THREE MINUTES, THE STANMORE SPEAKER WILL REVERT
TO STANDBY STATUS (EITHER POWERSAVER MODE OR STANDARD MODE,
DEPENDING ON WHICH OPTION YOU CHOOSE. THERE IS MORE INFORMA-
TION ON MODES IN THE STANDBY MODES SECTION ON PAGE 024.). IF THE
PAIR BUTTON IS PRESSED WHILE BLUETOOTH IS SELECTED AS THE AUDIO
SOURCE, THE STANMORE LOUDSPEAKER WILL PERFORM A NEW SEARCH
FOR THREE MINUTES AFTERWARDS, DURING WHICH TIME, THE LED LIGHT
WILL RAPIDLY FLASH RED.
BLUETOOTH AUTO CONNECTION
IF A DEVICE IS MOVED OUTSIDE THE RANGE OF STANMORE SPEAKER
(APPROXIMATELY 10 METRES WITHOUT OBSTACLES), THAT DEVICE IS
DISCONNECTED. THE DEVICE IS AUTOMATICALLY CONNECTED AGAIN WHEN
IT IS MOVED BACK WITHIN RANGE. THE STANMORE SPEAKER CAN MEMO-
RISE UP TO SIX DEVICES AND ALWAYS STARTS SEARCHING FOR THE LAST
DEVICE THAT HAS BEEN CONNECTED. IF THE STANMORE SPEAKER HAS
BEEN CONNECTED TO DEVICES A–B–C–D–E–F IN THAT ORDER, DEVICE F IS
GIVEN FIRST PRIORITY, WHILE DEVICE A IS GIVEN LAST PRIORITY. EVERY
TIME THE STANMORE STARTS UP, IT WILL PERFORM AN AUTO CONNEC-
TION OF DEVICES WITHIN ITS RANGE.
NOTES:
• THE AUTO CONNECTION FUNCTION WILL NOT WORK IF THE STANMORE LOUD-
SPEAKER IS TURNED OFF VIA THE MAIN POWER SWITCH AT THE TOP OF THE UNIT.
• IF A SEVENTH DEVICE IS CONNECTED, DEVICE A WILL NO LONGER BE MEMORISED.
• ALWAYS START BLUETOOTH IN YOUR SMARTPHONE/COMPUTER FIRST, AND THEN
START STANMORE LOUDSPEAKER TO RECEIVE AN AUTO CONNECTION.

CONNECTING SOURCES BY CABLE
THERE ARE A NUMBER OF WAYS TO CONNECT TO YOUR STANMORE THE
OLD FASHIONED WAY, USING A CABLE. USE ONE OF THE THREE AUDIO
INPUTS AVAILABLE: INPUT 1 - 3.5MM STEREO PLUG, INPUT 2 - RCA
ANALOGUE INPUT OR THE OPTICAL AUDIO DIGITAL INPUT.
• INPUT 1 - 3.5MM STEREO PLUG
USE THE DOUBLE-ENDED COIL CORD WITH 3.5MM PLUGS TO
CONNECT TO AUDIO SOURCES THAT HAVE AUDIO OUTPUT SUCH AS
A MOBILE TELEPHONE, IPHONE/IPAD/IPOD, MP3 PLAYER, OR
AIRPORT EXPRESS.
• INPUT 2 - RCA ANALOGUE INPUT
USE THE RCA ANALOGUE INPUT TO CONNECT TO YOUR CD PLAYER,
TURNTABLE (WITH RIAA) OR SONOS UNIT.
• OPTICAL AUDIO DIGITAL INPUT
USE THE OPTICAL INPUT TO CONNECT TO YOUR TV, APPLE TV,
AIRPORT EXPRESS, HARD DISK PLAYER, STREAMING PLAY, AND
SATELLITE OR CABLE RECEIVER. OPTICAL INPUT WORKS WITH PCM
STEREO ONLY. IF A CONNECTED DEVICE SENDS 5.1 AUDIO (OR
SIMILAR SURROUND SOUND), THE STANMORE WILL NOT FUNCTION.
SET THE AUDIO OUT TO STEREO ONLY ON YOUR TV, EVEN IF THE
SHOW IS BROADCASTED IN 5.1 AUDIO.
INPUT 1 - 3.5MM STEREO PLUG
020.
001. CONNECT THE CORD WITH THE 3.5MM STEREO PLUG TO THE INPUT
LABELLED INPUT 1 ON THE LOUDSPEAKER.
002. CONNECT THE CORD WITH THE 3.5MM STEREO PLUG TO THE MUSIC PLAYER.
003. SELECT INPUT 1 AS SOURCE BY PUSHING THE SOURCE/WAKE
BUTTON UNTIL THE INPUT 1 LED IS LIT (SEE PAGE 013.).
001.
NOTE: OPTICAL AUDIO CABLE AND
RCA CABLE NOT INCLUDED WITH THE
STANMORE AND MUST BE PURCHASED
SEPARATELY.
003.

INPUT 2 - RCA PORTS
001. SELECT INPUT 2 AS SOURCE BY PUSHING THE SOURCE/WAKE
BUTTON UNTIL THE INPUT 2 LED IS LIT (SEE PAGE 013.).
002. CONNECT THE CORD WITH THE RCA PLUGS TO THE MATCHING
SOCKETS (LEFT AND RIGHT) ON THE LOUDSPEAKER.
003. CONNECT THE RCA CORD TO THE RCA PORT ON YOUR SOURCE.
OPTICAL AUDIO
022.
001. SELECT OPTICAL AS SOURCE BY PUSHING THE SOURCE/WAKE
BUTTON UNTIL THE OPTICAL LED IS LIT (SEE PAGE 013.).
002. CONNECT THE OPTICAL AUDIO CABLE’S CONNECTOR POINTS TO
THE OUTPUT PORT LOCATED ON THE BACK OF THE LOUDSPEAKER
LABELLED OPTICAL IN.
003. CONNECT THE OPTICAL AUDIO CABLE TO THE OPTICAL AUDIO
INPUT ON YOUR HOME THEATRE, APPLE TV OR OTHER RECEIVER.
002. 003.
NOTE: TURNTABLE
MUST HAVE RIAA.

001. POWERSAVER STANDBY MODE: THE STANMORE WILL GO TO POWER
SAVING STANDBY MODE AFTER 20 MINUTES OF NOT RECEIVING A
SOUND SIGNAL. IF YOU HAVE CHOSEN TO USE THE POWERSAVER
STANDBY MODE, THE STANMORE WILL NOT WAKE UP AUTOMATI-
CALLY WHEN YOU BEGIN PLAYING MUSIC AND WILL NOT SHOW UP
AS AN AVAILABLE DEVICE IN YOUR BLUETOOTH LIST AFTER IT HAS
GONE INTO THIS LOW-POWER STATE. TO ACTIVATE STANMORE AND
PLAY MUSIC FROM ANY SOURCE AFTER THE UNIT HAS GONE TO
STANDBY MODE, PRESS THE WAKE BUTTON ONCE. THIS WILL BRING
THE STANMORE BACK TO LIFE AND READY TO PLAY AGAIN.
002. STANDARD STANDBY MODE: THE STANMORE WILL GO INTO STANDBY
MODE AFTER 20 MINUTES OF NOT RECEIVING A SOUND SIGNAL.
IF YOU HAVE CHOSEN TO USE THE STANDARD STANDBY MODE, THE
STANMORE WILL AUTOMATICALLY ‘WAKE UP’ WHEN THE LAST
SOURCE IS PLAYED. FOR EXAMPLE, IF A SOURCE CONNECTED WITH
A CABLE BEGINS TO PLAY, THE SPEAKER WAKES UP AUTOMATICALLY
WHEN THAT SOURCE IS SELECTED. IF A BLUETOOTH DEVICE WAS
USED AS THE LAST SOURCE, SIMPLY TOUCHING THE LATEST
BLUETOOTH DEVICE TO HAVE BEEN USED WILL WAKE THE STANMORE
UP AUTOMATICALLY. IF YOU WANT TO PLAY ANOTHER BLUETOOTH
DEVICE INSTEAD OF THE LAST ONE USED, PRESS THE WAKE BUTTON
ONCE TO PLAY MUSIC AGAIN.
POWERSAVER & STANDARDSTANDBY MODES
024.
ON THE BACK OF YOUR STANMORE, YOU WILL FIND A SWITCH THAT
ALLOWS YOU TO CHOOSE BETWEEN TWO DIFFERENT STANDBY MODES:
POWERSAVER OR STANDARD.
EUROPEAN UNION REGULATION STATES THAT ELECTRONIC DEVICES
MAY ONLY HAVE 0.5W POWER CONSUMPTION IN STANDBY MODE (THE
EUROPEAN DIRECTIVE ON ENERGY RELATED PRODUCTS, OR ERP). THIS IS
WHY THE STANMORE’S FACTORY DEFAULT SETTING IS THE POWERSAVER
MODE, BECAUSE THE POWERSAVER MODE SAVES MORE ENERGY THAN
THE STANDARD MODE.
AS THE NAME IMPLIES, USING THIS SETTING SAVES POWER. WHEN YOU
STOP PLAYING MUSIC, THE STANMORE WILL GO INTO A LOW-POWER
STATE AFTER 20 MINUTES. POWERSAVER MODE CAN BE DISABLED IF YOU
WANT STANMORE TO START AUTOMATICALLY AND STAY VISIBLE ON YOUR
LIST OF BLUETOOTH DEVICES AFTER 20 MINUTES. TO DISABLE POWER-
SAVER, SIMPLY CHANGE THE SWITCH TO STANDARD MODE.
001. 002.

ADJUSTING THE VOLUME/BASS/TREBLE
TURN THE KNOB TO ADJUST THE:
001. VOLUME
002. BASS
003. TREBLE
TECHNICAL INFORMATION
SOUND SPECIFICATION
• MAINS INPUT VOLTAGE/POWER: 100-240V~ /110W
• NOMINAL RATING: 100-240V~
• ABSOLUTE MIN/MAX: 90-264V~
• MAINS FREQUENCY: 50-60Hz
• MAX PEAK POWER CONSUMPTION: 200W
TECHNICAL INFORMATION
• ACTIVE STEREO LOUDSPEAKER WITH BASS REFLEX SYSTEM
• DIGITAL CLASS D AMPLIFIER: 2X20W+1X40W
• ¾” DOME TWEETERS: 2X
• 5-1/4” WOOFER: 1X
• BASS AND TREBLE TONE CONTROLS
• FREQUENCY RESPONSE: 45- 22.000HZ +-3DB
• CROSSOVER FREQUENCY: 2500HZ
• CONNECTIVITY:
- BLUETOOTH: STANDARD V4.0 + EDR APT-X CODEC
- INPUT 1 - 3.5MM: 1X
- INPUT 2 - RCA: 1X
- OPTICAL INPUT: 1X
• TWO STANDBY MODES: POWERSAVER MODE (0,43W)
AND STANDARD MODE (8,7W)
• MAX POWER OUTPUT: 80W
026.
NOTE: THE FRONT FRET IS NOT REMOVEABLE. THIS ILLUSTRATION INTENDS TO
SHOW THE INTERNAL SPEAKER LAYOUT. DO NOT ATTEMPT TO REMOVE THE
FRONT FRET FOR RISK OF DAMAGING YOUR ACTIVE LOUDSPEAKER.

TROUBLE SHOOTING STANMORE
PROBLEM CAUSE ACTION
THE ACTIVE LOUD-
SPEAKER WILL NOT
TURN ON.
THE SOUND IS WEAK
OR THERE IS NO
SOUND AT ALL.
THE SOUND IS
DISTORTED.
SHARP CRACKLING/
CLICKING ON STRONG
PASSAGES/TRANSIENTS.
ERRATIC PERFOR-
MANCE.
The power cord is not plugged into a
working wall socket or not plugged into
the power jack on the back of the active
loudspeaker.
The 3.5mm cord/input cable/signal cable is
not correctly connected to either the active
loudspeaker or the music player.
The volume level is too low on the active
loudspeaker.
The volume level is too low on the music
player.
The volume level is too high.
The original sound le (mp3) is of poor quality.
Excessive playback volume.
Too much bass/treble boost.
Clipping when the amplifier runs out of
power.
Interference from
another source or
electronic device.
Plug the power cord into a working wall socket and plug the connector
into the power jack on the back of the active loudspeaker.
Unplug and re-plug the 3.5mm cord/input cable/signal cable into
both the active loudspeaker and the music player.
Turn up the volume on the active loudspeaker.
Turn up the volume on the music player.
Turn down the volume.
Try another sound file (mp3) or music player.
Turn down playback level on the volume knob or reduce the sound level
on the music player.
Turn down the volume control on the control panel and/or music player.
Reduce the bass boost on the control panel or excessive bass boost/eq on
the music player.
Turn down the volume on the speaker or on the music player.
Reduce the bass boost.
Move the active loudspeaker to another spot or turn off or move
other electronic devices.
028.

BLUETOOTH TROUBLE SHOOTING STANMORE
PROBLEM CAUSE ACTION
BLUETOOTH WILL NOT
CONNECT.
BLUETOOTH
CONNECTION DOES
NOT WORK AS WELL
AS IT SHOULD.
THE SOUND QUALITY
IS POOR WHEN
CONNECTED THROUGH
BLUETOOTH.
BLUETOOTH
CONNECTION IS
BROKEN OR
DISRUPTED.
THE STANMORE
LOUDSPEAKER
CANNOT FIND A
BLUETOOTH
CONNECTION.
Stanmore is too far away from your device
during the pairing process.
You may be in an area with poor reception.
The greater the distance between the
Stanmore and the Bluetooth device, the
poorer the sound quality will be.
The Bluetooth connection only works
when it is near the device. The connection
is automatically broken if the Bluetooth
device moves outside of the area. The
connection may even be affected due to
obstacles such as walls or doors.
The loudspeaker cannot search or connect
correctly in the following cases:
• If there is a strong electric field
surrounding the Stanmore.
• If the Bluetooth device is turned off, not
available or does not function as it should.
• Please note that items such as, for
example, microwave ovens, wireless net-
work adapters, fluorescent lights and gas
cookers use the same frequency range as
the Bluetooth device, which could lead to
electrical disturbances.
Place the Stanmore closer to the Bluetooth device during the pairing
process.
Move to an area with better reception to improve Bluetooth connectivity.
Move the Stanmore closer to the Bluetooth device. If the distance
exceeds the Bluetooth device’s wireless range, the connection will
be lost.
Ensure that the Stanmore is placed near the Bluetooth device, and
unobstructed by obstacles such as walls or doors.
Please ensure that there is no electrical interference surrounding the
Stanmore, that your Bluetooth device is on and working properly.
030.
NOTES:
• A BLUETOOTH DEVICE COULD CAUSE SOUND-RELATED OR TECHNICAL FAULTS,
DEPENDING ON USE, IN THE FOLLOWING CASES:
- WHEN SOME PART OF THE BODY IS IN CONTACT WITH THE RECEIVING/
TRANSMITTING SYSTEM FOR THE BLUETOOTH DEVICE OR THE STANMORE LOUDSPEAKER.
- ELECTRICAL VARIATIONS DUE TO OBSTACLES IN THE FORM OF WALLS, CORNERS,ETC.
- EXPOSURE TO ELECTRICAL DISRUPTIONS FROM DEVICES WITHIN THE SAME
FREQUENCY BAND, FOR EXAMPLE MEDICAL EQUIPMENT, MICROWAVE OVENS
AND WIRELESS NETWORKS.
• THIS WIRELESS DEVICE MAY CAUSE ELECTRICAL DISRUPTIONS DURING USE.
• YOU DO NOT NEED TO ENTER THE PIN CODE (PASSWORD) WHEN CONNECTING
THE BLUETOOTH DEVICE TO STANMORE SPEAKER. IF THE WINDOW FOR ENTER-
ING THE PIN CODE IS DISPLAYED, YOU SHOULD ENTER <0000>.
• YOU CANNOT CONNECT TO A BLUETOOTH DEVICE THAT ONLY SUPPORTS THE HF
(HANDS FREE) AREA FUNCTION.

032.
001. SAFETY INSTRUCTIONS
002. SAFETY LABELS
003. LANGUAGE INDEX
005. THE STANMORE
008. BOX CONTENTS
010. GENERAL DESCRIPTION
012. TURNING THE POWER ON/OFF
014. USING THE STANMORE WITH
YOUR DEVICES
015. CHOOSING YOUR SOURCE
016. BLUETOOTH CONNECTION
020. CABLE CONNECTION
021. INPUT 1 - 3.5MM STEREO PLUG
022. INPUT 2 - RCA PORTS
023. OPTICAL AUDIO
024. STANDBY MODES
026. ADJUSTING SOUND
027. TECHNICAL INFORMATION
028. TROUBLE SHOOTING
000. WARRANTY INFO
INDEX
FRANÇAIS

CONSIGNES DE SÉCURITÉ IMPORTANTES
CONSIGNES DE SÉCURITÉ IMPORTANTES
018. Lisez ces consignes – Toutes les consignes de sécurité et d'utilisation doivent être lues avant
toute utilisation de ce produit.
019. Conservez ces consignes – Les consignes de sécurité et d'utilisation doivent être conservées
pour consultation ultérieure.
020. Tenez compte de tous les avertissements – Tous les avertissements sur l'appareil et dans les
consignes d'utilisation doivent être respectés.
021. Suivez toutes les consignes – Toutes les consignes d'utilisation doivent être suivies.
AVERTISSEMENT!
022. AVERTISSEMENT – Pour réduire le risque d'incendie ou d'électrocution, n'exposez pas cet
appareil à la pluie ou à l'humidité. L'appareil ne doit pas être exposé à des gouttes ou à des éclabous-
sures de liquides et aucun objet contenant des liquides, tel qu'un vase, ne doit être placé sur l'appareil.
023. AVERTISSEMENT – ne recouvrez pas l'appareil.
024. AVERTISSEMENT – n'utilisez que des accessoires agréés par le fabricant (bloc d'alimentation
d'origine, batterie d'origine, etc.).
025. AVERTISSEMENT – la prise est le principal dispositif de déconnexion et doit être utilisée comme
telle. Le dispositif de déconnexion doit rester facilement accessible.
026. AVERTISSEMENT – ce haut-parleur actif peut émettre des niveaux de pression sonore élevés.
027. AVERTISSEMENT – n'écoutez pas le haut-parleur actif de trop près.
028. AVERTISSEMENT – n'écoutez pas à un niveau de pression sonore élevé pendant de longues durées.
029. AVERTISSEMENT – n'essayez pas de retirer le châssis du haut-parleur actif, aucune pièce ne
nécessite d'entretien par l'utilisateur.
030. AVERTISSEMENT – ne branchez pas votre guitare sur le Hanwell.
031. AVERTISSEMENT – n'insérez pas de membre ou d'objet dans le port de basse, risque de blessure.
032. DANGER – en cas de chute du produit.
033. DANGER – angles pointus.
HUMIDITÉ
034. Le haut-parleur actif doit être placé dans un lieu sec.
035. N'utilisez pas cet appareil près d'une source d'eau. Ne l'exposez pas à la pluie ou à des ruissel-
lements. Ne l'éclaboussez pas d'eau.
INSTALLATION
036. N'installez pas l'appareil près d'une source de chaleur telle qu'un radiateur, une bouche de
chauffage, un poêle ou un autre appareil (y compris un amplicateur) produisant de la chaleur.
037. Aucune source de amme nue, telle qu'une bougie allumée, ne doit être placée sur le haut-
parleur actif.
038. Ne bloquez pas les ouvertures de ventilation. Installez l'appareil conformément aux consignes
du fabricant.
039. Utilisez exclusivement le charriot, le pupitre, le trépied, le support ou la table spécié par le fabri-
cant ou fourni avec l'appareil. Si vous utilisez un charriot, soyez prudent lorsque vous retirez l'ensemble
charriot/appareil pour éviter de le renverser et de vous blesser.
BRANCHEMENT
040. Branchez le haut-parleur actif conformément aux instructions du manuel.
041. Branchez le haut-parleur actif uniquement sur la tension secteur correcte indiquée sur l'équipement.
042. Protégez le cordon d'alimentation pour éviter qu'il ne soit piétiné ou pincé, en particulier au
niveau des prises et du point de sortie de l'appareil.
043. N'utilisez que des sources électriques du type spécié dans les consignes d'utilisation ou indiqué
sur le haut-parleur actif. Ne remplacez pas l'alimentation électrique distincte fournie avec le haut-parleur
actif par une autre alimentation électrique, utilisez uniquement celle fournie par le fabricant.
044. Ne désactivez pas le dispositif de sécurité de la prise polarisée ou de terre. Une prise polarisée
a deux lames, l'une plus large que l'autre. Une prise de terre a deux lames et un picot de terre. La lame
large ou le picot visent à assurer votre sécurité. Si la prise fournie ne rentre pas dans votre prise femelle,
consultez un électricien pour faire remplacer la prise femelle obsolète.
045. Débranchez cet appareil pendant les orages ou les longues périodes d'inutilisation.
046. Ne l'installez pas dans un endroit qui bloque l'accès à la prise électrique. Débrancher le produit
de la prise électrique est le seul moyen de le mettre complètement hors tension, la prise doit donc être
accessible à tout moment.
NETTOYAGE
047. Nettoyez avec un chiffon sec uniquement.
MAINTENANCE
048. Conez tout l'entretien à du personnel d'entretien qualié. L'entretien est nécessaire lorsque
l'appareil a été endommagé, par exemple si le cordon d'alimentation ou la prise sont endommagés,
si du liquide a été répandu ou si des objets sont tombés dans l'appareil, si l'appareil a été exposé à la
pluie ou à l'humidité, s'il ne fonctionne pas normalement ou s'il est tombé.
049. ATTENTION: Les présentes consignes d'entretien sont destinées uniquement à un personnel
d'entretien qualié. Pour risque d'électrocution, ne procédez à aucune opération d'entretien si vous
n'êtes pas qualié pour le faire.
ÉTIQUETTES DE SÉCURITÉ
ATTENTION : Pour éviter tout risque d’électro-
cution, ne retirez pas le couvercle (ou la plaque
arrière). Aucune pièce présente à l’intérieur ne
nécessite d’entretien par l’utilisateur. Conez l’en-
tretien à du personnel d’entretien qualié.
Cet appareil ne doit pas être traité comme un
déchet ménager habituel. La gestion des DEEE
(déchets d’équipements électriques et électro-
niques) est en vigueur dans les États membres de
l’Union européenne et dans d’autres pays euro-
péens ayant leur propre réglementation nationale
sur la gestion des DEEE. Pour plus d’informations
sur les systèmes de collecte, de réutilisation et de
recyclage, veuillez contacter les autorités locales
ou régionales en charge des déchets.
Marque PSE Japon. Le produit est conforme aux
directives européennes suivantes : La directive
compatibilité électromagnétique 2004/108/CE et
la directive basse tension 2006/95/CE.
Marque ETL: cet appareil est conforme à la par-
tie 15 des règles de la FCC. Le fonctionnement
est soumis aux deux conditions suivantes: (1) cet
appareil ne doit pas causer d’interférence nocive
et (2) cet appareil doit accepter toutes les inter-
férences reçues, y compris les interférences sus-
ceptibles de provoquer un dysfonctionnement.
Cet appareil numerique de la classe B est à la
norme NMB-003 du Canada.
Le produit est conforme aux directives euro-
péennes suivantes: a directive compatibilité élec-
tromagnétique 2004/108/CE. La directive basse
tension 2006/95/CE.
Cet équipement est un appareil électrique de
classe II ou doublement isolé. Il a été conçu pour
ne pas nécessiter de raccordement de sécurité à
la terre.
3114849