Martha Stewart BELDEN MT120-0129 User manual

ASSEMBLY INSTRUCTIONS
Description: BELDENCASTEREDCOFFEE TABLE
Pleasereadcarefullyallinstructions before assembly.
For yoursafety andease,assemblybytwoormoreadults is recommended.
Keepinstructions for future use.
Importantsafetyinstructions:
Donotdiscardanycontent untilassembly is completetoavoidaccidentallydiscardingsmallparts or hardware.
Takeout all parts andhardwarefrom box.
Pre-assembly:
1
12
12
12
BoltsØ5/16"x 2''
AllenKey
FlatWashersØ5/16"
LockWashersØ5/16"
H4
H3
H2
H1
Item Description QTY
HardwareList
BoltsØ5/16"x 2''
Allen Key
FlatWashersØ5/16"
LockWashersØ5/16"
(H4)x1
(H3)x8
(H2)x8
(H1)x8
P1
P3
Page1of2
DISCLAIMER:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR
ANY DAMAGES RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
Assembly Procedures:
Step 1:
Assemble the table on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.
Attach the Legs (P3) to the Table Top (P1)
as shown below.

P2
BoltsØ5/16"x 2''
Allen Key
FlatWashersØ5/16"
LockWashersØ5/16"
(H4)x1
(H3)x4
(H2)x4
(H1)x4
Step2:AttachtheShelf(P2) totheLegs(P3)as shownbelow.
Step3: Turntheassembled table toan upright position.Assemblyiscomplete.
ADDITIONAL NOTE ABOUT SAFETY:
BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE.
THEY SHOULD BE INSPECTED AT LEAST EVERY 3 MONTHS AND RE-TIGHTENED AS NEEDED TO PREVENT DAMAGE OR INJURY,
AND ENSURE STABILITY. Thank
you for your purchase
Page2of2