Martha Stewart Jayco Accent Chair User manual

Pre-assembly:
Take out all parts and hardwares from box.
Do not discard any content until assembly completed to avoid accidentally discarding small parts or hardware.
Important safety instructions:
Please read carefully all instructions before assembling the table.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
H1
H2
H3
LEFT
RIGHT
1PC
1PC
1PC
1PC
H4
H5
H6
M8*55MM
1PC
8PCS
2PCS
M8
(Ø8+Ø21*2MM
(Ø8+Ø13)*1.5MM 8PCS
M8*30MM
8PCS
4PCS
Ø25*5MM
H6
H1 H3 H4
100%
P1
P2
CHAIR BACKREST
CHAIR SEAT
Assemble the chair on a flat, soft surface such as a carpet or cloth to prevent scratching.Turn the
chair seat(P2) upside down, open the zipper, comfirm direction, put chair seat(P2) on the chair
backrest(P1),fully tighten bolts(H1) and washers(H3 and H4） with allen wrench(H6) as illustration
below.
Page 1 of 4
Jayco Accent Chair

(P3)LEFT
(P4)RIGHT
H6
H2 H3 H4
70 %
(P3)LEFT
Front
back
P2
P1
H5
Page 2 of 4
Step2.Tear off the cover on the gasket, paste the gasket on both ends of the foots as illustration below.
Step3.Place the side of the chair on a level surface, put on the leg, 70% tighten bolts (H2) and washers
(H3and H4) with allen wrench (H6) as illustration below.

H6
H2
70%
(P3)LEFT
Front
back
H6
H2 H3 H4
70%
(P4)RIGHT back
Front
Page 3 of 4
Step4.70% tighten bolts (H2) with allen wrench (H6) as illustration below.
Step5.Turn the chair over, put on the leg, 70% tighten bolts (H2) and washers (H3 and H4) with allen
wrench (H6) as illustration below.

ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO ENSURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
H2
70 %
H6
(P4)RIGHT back
Front
P2
100%
H6
H6
H2 H3 H4
100%
Step6.70% tighten bolts (H2) with allen wrench (H6) as illustration below.
Step7. Fully tighten the bolts as illustration below.
Page 4 of 4