Martha Stewart Sloane Accent Bench User manual

ASSEMBLY INSTRUCTIONS
Description: Sloane Accent Bench
Important safety instruction:
·Please read carefully all instruction before assembly.
·For your safety and ease, assembly by two or more adults is recommended.
·Keep instruction for future use.
Pre-assembly:
·Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
·Take out all parts and hardware from box.
PART LIST
DescriptionItem QTY.
P1 1 Pc
Body
HARDWARE LIST
DescriptionItem QTY.
H1 8 Pcs
JCBC BOLT M6 X 45MM
P2 2 PcsSide Arm
H2
H3
H4
8 PcsM6 x 19 x 1.0 Flat Washer
8 Pcs
M6 Spring Washer
1 PcM6 Allen Key
DISCLAIMER:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE
FOR ANY DAMAGES RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER
PURCHASE.
Assembly Procedures:
Step 1:
Assemble the bench on a flat surface such as box or chair and covered with carpet or cloth to prevent scratching the
finish of product.
P1
Page 1 of 3

Assembly Procedures:
Step 2:
Attach the Side Arm to the body, insert the JCBC bolt and strengthen the bolt using Allenkey
P1
P2 P1
P2
H1
H2
H3
H4
Step 3:
Repeat assembly process from step 1 and strengthen all bolts using Allenkey
Page 2 of 3
ASSEMBLY INSTRUCTIONS
Description: Sloane Accent Bench
P1
P2
P2
P2
P1
H2
H3
H1
H4

Page 3 of 3
Complete Assembly:
ADDITIONAL NOTE ABOUT SAFETY : BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE.
THEY SHOULD BE PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR
INJURY. ALWAYS CHECK TO ENSURE THAT ALL HARDWARE IS KEPT TIGHTENED.
Thank you for your purchase
ASSEMBLY INSTRUCTIONS
Description: Sloane Accent Bench