Maspro 2SPFAD User manual

1
MASter of PROduction
Frequency Range:10〜2655MHz
Read this instruction manual carefully before use.
Instruction Manual
2-way Splitter
2SPFAD
MASPRO's original back-cover press fit processing and
zinc die-casting housing, integrated with receptacles,
provide complete shielded housing and excellent
shielding effect against any radio wave interference.
INDOOR USE SPLITTERS
2SPFAD
2-way
3SPFAD
3-way
4SPFAD
4-way
5SPFAD
5-way
6SPFAD
6-way
8SPFAD
8-way 4-way Splitter
4SPFAD
Band width is 10~2655MHz which covers all of the
IF Band of Satellite.
Min. Isolation Out-to-Out
(dB)
Symbol
10

76
MHz
〜


Max. Splitting Loss
(dB)Max. VSWR
4.4
6.3
8.5

10.5
4
6


10

76

222
MHz
〜


222

770
MHz
〜


770

1336
MHz
〜


10

76
MHz
〜


76

222
MHz
〜


222

770
MHz
〜


770

2602
MHz
〜


10

76
MHz
〜


76

770
MHz
〜


1336

1770
MHz
〜


1770

2150
MHz
〜


2150

2602
MHz
〜


2602

2655
MHz
〜


2602

2655
MHz
〜


770

1336
MHz
〜


1336

2150
MHz
〜


2150

2602
MHz
〜


2602

2655
MHz
〜


9

11.5
Type
2-way
3-way
4-way
5-way
8-way
Model
I mpedance (Ω)
IN OUT
2SPFAD
3SPFAD
4SPFAD
5SPFAD
8SPFAD
75
F-type
connector
（ ）
6SPFAD
6-way
8
4.2
7

9.8
11
12.5
ALL ports Power Passing
Maximum Power Passing Capacity: 0.8A at 15V DC
Model
2SPFAD・3SPFAD
4SPFAD・5SPFAD
6SPFAD・8SPFAD
H×W×D（mm）
53×52×21
53×74×21
53×118×21
Dimensions
2 ※
※4SPFAD，6SPFAD，8SPFAD…… OUT VSWR : 2.5
4.8
8
9.5
10.5
12
13.5

8.5
10

14
15

9
11.5

15.5
17
6
12.5
7



17
18.5
7.4



17.5
19
11.5
12.5
14
12
18
12
20

20
25

20

18
20

18
15
1.5
1.8
1.5
1.6

1.8
1.8
2
2
2.5
2
2.5
NOTE
●Be careful not to connect this splitter (all ports power passing types) with more than two units between
the power supplying unit and reception equipment.
●No power passing for 20-30V AC.
●Power passing not possible from IN port to OUT port.
●Do not confuse IN and OUT ports.
DC Use Only
The JEITA Digital Hi-Vision mark (DH mark) is conferred by the Japan Electronics and
Information Technology Industries Association to indicate the superior performance of
antennas and equipment for both satellite and terrestrial digital TV broadcasting.
Specifications and external design are subject to change due to upgrades in product quality .
F-type connectors (For 5C Cable): Includes connectors to cover all ports 
You can always rely on MASPRO's performance data.
Zinc Die-casting
Housing
SPLITTERS
All ports Power Passing
Superb Elimination of Electoromagnetic Interference
Wide Band
Specifications
Accessory
This is the MASPRO RoHS logo attached to equipment that is compliant with the standards of
the EU (European Union) Environmental Directive, RoHS ("Restriction of the use of certain
Hazardous Substances in Electronic Equipment").
SPLITTERS

W
H
D
Japanese Patent No.2802659
Japanese Design Patent No. 865907
Japanese Design Patent No. 996171

ASADA, NISSIN, AICHI, 470-0194 JAPAN
NOTE
2N·m(21kgf·cm)
F-type connector
●Tightening torque
Wood Screws (2pcs.)
Wooden Wall
(Thickness of 10mm or more)
After connecting with cable, install splitter on wooden wall
with the two wood screws attached to the splitter itself.
This splitter is indoor use only.
Please refrain from using this splitter outdoors.
VHF UHF
2-way Splitter
2SPFAD
Satellite
15V DC
DFMTD
Satellite
VHF UHF
Wall Outlet
(Power Insertion Type)
VHF･UHF/Satellite Separator
SR2TL2-P
15V DC
Satellite
VideoAudio
VHF･UHF
15V DC
TV
Satellite Receiver
VHF･UHF/Satellite Mixer
VHF･UHF
Mixer
For satellite reception, use units and
cables which meet the performance
requirements for the satellite frequency
range.
DFMTD
(Power Insertion Type)
Satellite
VideoAudio
VHF･UHF
15V DC
TV
Satellite Receiver
VHF･UHF/Satellite Separator
SR2TL2-P
15V DC
Wall Outlet
15VDC
IN
OUT OUT
Cut off the tip of the
center conductor at
an angle to prevent
incomplete contact.
The center conductor is covered
with white film. Be sure to remove
it for better conductivity.
1.Pass the ferrule through the cable.
2.Fold back the copper braids.
3.Push the plug in firmly.
Fold back the
copper braids.
Aluminum foil
Ferrule
plug
plug
Completed
Ferrule
Cable
1mmorless
Ferrule
2mm
A bent center conductor may cause
short circuit and malfunction.
Complete Drawing
Straighten the center conductor.
When aluminum foil comes off
Push and turn the plug in the cable
gently so that the plug turns the
aluminum foil in the same direction
it is coiled, and be sure to keep the
aluminum foil inside the plug.
In addition, be sure to remove
any shreds of aluminum foil.
Press firmly at the foot of the plug
so that it does not come out.
Center conductor Center conductor
Make sure the length of the
center conductor is 2mm.
Excessively long center conductor
may damage connector and will
cause malfunction.
Actual size
4
9mm
1 Cable processing 2 Mounting the plug 3 Pressure bonding of ferrule
MASter of PROduction 2K56-071CY(B)・78-5071-1L
2
F-type connector, provided as accessory, is for 5C cables.
AUG., 2007
How to Install
F-type Connector Installation
Example
Power Passing Capacity
0.8A at 15V DC