MASS FIDELITY relay User manual

Hi-Fi wireless receiver
ENGLISH | FRANÇAIS | DEUTSCH v.1.4
GETTING STARTED

www.massfidelity.com
2
SETTING UP YOUR RELAY
Congratulations on purchasing Mass Fidelity’s Relay! Follow these
simple instructions to quickly set up and start using your Relay.
For detailed information and troubleshooting please go to our
website: massfidelity.com
DC Input
Audio Output (Analog and Digital)
Antenna connector
Power button
A
B
C
D
C
A
D
B

www.massfidelity.com 3
SETTING UP YOUR RELAY
1. Screw in the antenna (C)
2. Connect one end of the included audio cable (RCA-RCA or
RCA-3.5) to the RCA jacks (B) on the Relay.
3. Connect the other end of the audio cable (RCA-RCA or RCA-3.5)
to any unused audio input on your hi-fi system. (Do not use
a phono input)
4. Connect the power supply cable to the Relay’s DC input jack (A)
and plug the power adapter into a wall outlet.
5. Press the power button (D).The white LED light will turn on to
indicate the unit is powered and now ready to be paired.
Please note:
The Relay’s output is set to analog by default. To engage the Relay’s
digital output mode hold the power button down for 5 seconds.The LED
will change from White to Orange indicating the Relay’s output is now
digital S/PDIF. Connect either RCA output to any audio device with a
digital input.

www.massfidelity.com
4
PAIRING YOUR RELAY
1. Turn your Bluetooth ON.
Apple (iPhone, iPad, iPod Touch)
From the Home screen,tap àSettings àBluetooth
(Or: Settings àGeneral àBluetooth)
On Android
From the Home screen,tap àSettings àBluetooth
On other smart devices
Please refer to the Bluetooth settings in the instruction manual
that came with the device.
2. Scan listed Bluetooth devices and select Relay.
3. Make sure your hi-fi system is turned on and that the proper
input source is selected.
4. The music on your smart device will now play through your
hi-fi system!
Keep in mind that your Relay has a 10-meter (30 ft) range.

www.massfidelity.com 5
ALWAYS-ON POWER OPTION
The Relay turns off after 30 minutes of inactivity.
To bypass this feature, please follow these steps:
1. Turn the Relay ON by briefly pressing the power button.
2. Set the Relay to your desired output: Analog out (white LED)
is the default.To switch to digital output,press and hold the power
button (about 5 seconds) until the LED turns orange.
3. Next,press and hold down the power button for 10 seconds
while the Relay switches output as follows:
 t "GUFSTFDPOETUIF3FMBZTXJUDIFTUPUIFPUIFSPVUQVU
from white LED to orange, or vice versa.
 t TFDPOETMBUFSUIF3FMBZTXJUDIFTCBDLUPZPVSQSFGFSSFEPVUQVU
The LED now displays the output you selected (white/analog
or orange/digital).
The 30 minute auto power-off feature is now disabled.
To re-enable,disconnect and reconnect the power adaptor from
the back of the Relay.

www.massfidelity.com
6
SPECIFICATIONS
Basic Specifications
Input Power: 5 Volts DC 1A
Output Power: 2 Volts RMS
Compatible Power Systems: 110-240 Volt
D/A Converter: Burr Brown 5102, 24 Bit
Bluetooth® Module: aptX® enabled CSR module
Bluetooth® Range: 10 m; 30 ft
Enclosure: Machined aluminum
Dimensions: 115 x100 x36 mm; 4.6”x 4”x 1.4”(L xW xH)
Weight: 380 g; 13.4 oz
LED Indicator Colour
White: On
Red: Standby
Orange: Digital Output

www.massfidelity.com 7
SAFETY INFORMATION
!
WARNING
t %Pnot attempt to repair, modify, or disassemble your Relay.
t %POPUVTFUIF3FMBZOFBSXBUFS
t %POPUJOTUBMMOFBSBOZTPVSDFTPGIFBU
t 6OQMVHUIF3FMBZXIFOOPUJOVTFGPSMPOHQFSJPETPGUJNF
t .BTT'JEFMJUZEPFTOPUBTTVNFBOZSFTQPOTJCJMJUZGPSQFSTPOBMJOKVSZ
or property damage incurred due to interaction with the Relay.
t 0OMZVTFBUUBDINFOUTBDDFTTPSJFTBOEQPXFSTVQQMJFTTQFDJmFE
by Mass Fidelity.
FCCSTATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and,if not installed and used in accordance with the instructions,may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
t
Reorient or relocate the receiving antenna.
t
Increase the separation between the equipment and receiver.
t
Connect the equipment into an outlet on a circuit different from that which
the receiver is connected.
t
Consult the dealer or an experienced radio/TV technician for help.
The FCC requires the user to be notified that any changes or modifications to this
device that are not expressly approved by Mass Fidelity, Inc., may void the user’s
authority to operate the equipment.

www.massfidelity.com
8
MASS FIDELITY LIMITED WARRANTY
Mass Fidelity warrants to the original purchaser that the product shall be free
of manufacturing and material defects for a period of 6 months (24 months
&6GSPNUIFEBUFPGPSJHJOBMQVSDIBTFQSPPGPGQVSDIBTFSFRVJSFE6QPO
registration of your product at www.massfidelity.com/registration, the warranty
XJMMCFFYUFOEFECZNPOUITNPOUIT&6
To make a warranty claim, please call us at 1.647.558.0726 or email us at
support@massfidelity.com. Our tech support team will do their best to resolve
the issue, failing which we will repair or replace the product, or in the event of a
discontinued product, provide a discount or refund on a pro-rata basis.
Limitations:
We do not warrant that our products will operate without interruption, as
products are typically installed in a network environment where other products
may interfere with proper wireless operation.We will not warranty product that
has been purchased second-hand or from unauthorized resellers.You can
determine if a reseller is authorized by contactingsupport@massfidelity.com.
Repair or replacement of the product is our sole liability, and your sole remedy
under the warranty.We do not make any warranty regarding merchantability,
fitness for use,or installation, however consumer law may give you additional
warranty rights.
Warranty is Void if:
tThe product has been abused (intentionally or accidentally);
this includes damage due to liquids, heat, careless handling
or inadequate packaging.
tThe product has been tampered with or damaged by an
unauthorized service facility.
tThe serial number has been removed or defaced.
tThe product has been damaged by 3rd party products.

www.massfidelity.com support@massfidelity.com 1.647.558.0726
Write your serial number here for easy access:
Écrivez votre numéro de série ici pour faciliter l’accès:
4DISFJCFO4JF*ISF4FSJFOOVNNFSIJFSGàSEFOFJOGBDIFO;VHSJGG
Mass Fidelity, Inc.

© 2016 Mass Fidelity, Inc. All rights reserved |Tous droits réservés |Alle Rechte vorbehalten.
Designed in Canada. Made in China.
The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth SIG, Inc.,
and are used by Mass Fidelity, Inc., under license.
aptX® software is copyright CSR plc or its group companies.All rights reserved.The aptX® mark and the aptX logo
are trademarks of CSR plc or one of its group companies and may be registered in one or more jurisdictions.
Conçu au Canada. Fabriqué en Chine.
La dénomination Bluetooth et les marques de commerce Bluetooth sont la propriété de Bluetooth SIG,Inc.,
et sont utilisés sous license par Mass Fidelity., Inc.
Le logiciel aptX de CSR plc ou son groupe d’entreprises est protégé par droits d’auteur.Tous droits réservés.
La marque aptX et le logo aptX sont des marques de commerce de CSR plc ou de l’une des entreprises
de son groupe,et peuvent être des marques déposées dans une ou plusieurs juridictions.
In Kanada entwickelt. In China hergestellt.
Die Bluetooth® Wortmarke und Logos sind Eigentum der Bluetooth SIG Inc.
und jegliche Verwendung solcher Marken durch die Mass Fidelity erfolgt unter Lizenz..
aptX® ist eine eingetragene Marke von CSR plc.