Massive Audio CK 5X User manual

* Machined Cast Aluminum Basket With Heavy Power Coating
* High-Energy Y40 Magnets Assures Sufficient Magnet Force Needed
For High Sensitivity And Accurate Sound Reproduction
* Woven Carbonfiber Cone With Butyl Rubber Surround
* High Quality Nomax Spider
* 35mm High Temperature CCAW Voice Coil
* Fully Isolated Tinsel Leads To Eliminate Crosstalk
* 28mm Silk Diaphragm Tweeter With Ferro Fluid Cooled V.C.
* Woofer With Removable Phase Plug For Co-Axial Applications.
* Competition Grade 18 dB Crossover
* Briefcase Style Gift Box Packaging
E8
R
500
PEAK WATTS
CK 6X
CK 6X
CK 6X
CK 69X
CK 69X
CK 69X
Mounting Depth
ledoM
Woofer Size
Tweeter Size
Frequency Range
SPL @ 1W
Watts RMS
Maximum Power
Peak Power
Impedance
Crossover
Frame Diameter
Mounting Hole Diameter
Specifications:
69X KC
6x9"
570-20Khz
92.4 dB
250 W
500 W
600 W
3.6 Ohm
28mm Silk
18 dB
9.39"
8.92"
3.48"
5X KC
5.25"
76-20Khz
89.9 dB
200 W
400 W
500 W
3.6 Ohm
28mm Silk
18 dB
5.07"
4.49"
2.28"
6X KC
6.5"
69-20Khz
90 dB
200 W
400 W
500 W
3.6 Ohm
28mm Silk
18 dB
6.49"
5.69"
2.67"
Series Component
600
PEAK WATTS
General Features:
P.O. Box 252004 Los Angeles, CA 90025 U.S.A.
www.mas siveaudio.com

Instructions for Convertible Tweeter
To convert your CKX component kit to a co-axial please read the following instructions:
Step1:
Unscrew the phase plug from the cone of
the woofer.
Step3:
Feed the speaker wire through the pole piece
and down through the bottom of the magnet.
Step2:
Attach the tweeter housing to the pole piece
provided with the kit and make sure the bottom
of the tweeter housing aligns with the pole piece.
There will be 2 grooves that connect.
Step4:
Feed the wire through the cut groove in the washer
and insert the screw to the bottom of the magnet hole
and connect to the bottom of the tweeter housing.
Tighten the screw so that the tweeter is aligned and secure.