Master Bilt Combination Heater/Proofing Cabinet Non-insulated HP6A-LX... User manual

ITEM NO. ______________________________________________________
PROJECT ______________________________________________________
LOCATION _____________________________________________________
DATE _________________________ QTY. ___________________________
908 Highway 15 North • New Albany, MS 38652
PHONE: [phone] or 662-534-9061 • FAX: [phone] or 662-534-6049 • www.master-bilt.com
CONSTRUCTION
• Multi-purpose design provides
heat for holding as well as heat
and humidity for proong. Also
serves as a mobile heated trans-
port cabinet.
• 14 gauge aluminum body and 14
gauge galvanized caster base
• Removable, dual purpose ther-
mostatically controlled hold-
ing/proong unit with external
controls and 12 hour timer for
proong mode
• Can be used with or without
water
• Condensation drip trough,
removable for cleaning
• Adjustable damper
• Removable louvered back
mounted air tunnel for even
heat distribution
• Five-inch swivel plate casters
with modulus wheels (two with
brakes)
DOOR
• 270° door swing
• Hinged right
• Field reversible
• Positive latch handle
CLEARANCE
• Minimum of 4" clearance re-
quired on cabinet back and sides
THERMOSTAT RANGE
• Heating: 80° to 185°F
(27° to 85°C)
• Proong: 80° to 135°F
(27° to 57°C)
PANS
• Maximum ledge load: 30 lbs. per
ledge
• Standard ledge spacing: 3" or
41/2"
• Ledge spacing can also be ad-
justed to 33/4", 51/4", 6" and 63/4"
without additional ledges
• Optional ledge kit allows 11/2"
spacing
• Pan/tray accomodations:
–18" x 26"
–18" x 13"
–12" x 20"
WARRANTY
• Limited two year parts and labor
FEATURES
HP6A-LX
HP6A-LX SERIES
Combination
Heater/Proong Cabinet,
Non-insulated
OPTIONS
❑ 11/2" spaced ledge kit
MODEL
❑ HP6A-LX

All specications subject to change without notice.
908 Highway 15 North • New Albany, MS 38652
PHONE: [phone] or 662-534-9061 • FAX: [phone] or 662-534-6049 • www.master-bilt.com
HP6A-LX SERIES
COMBINATION HEATER/PROOFING CABINET, NON-INSULATED
TECHNICAL SPECIFICATIONS
LISTINGS
HOOKUP
BID SPECIFICATIONS
Item no. HP6A-LX.
Provide____________( ) Combination
Heater/Proong Cabinet, Non-Insulated.
Cabinet will have die-formed, corrosion
resistant aluminum body and door with
14 gauge galvanized caster base. Cabinet
will be provided with bottom mounted, re-
movable, externally controlled, 1900 watt
holding/proong unit having main on/off
1289-6/10-web
© Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.
Via plug in, 9 foot long exible
three wire 12/3 SJO cord with
molded plug.
ELEVATION VIEW SIDE VIEW
switch, dual thermostats, digital thermom-
eter, holding or proong selector switch
and 12 hour timer for proong.
Cabinet will have eld reversible door
with positive latching handle and gasket,
270° door swing, adjustable damper, drip
trough and louvered air tunnel for even
heat distribution.
Cabinet will be provided with four 5-inch
standard duty swivel plate casters having
modulus wheels. Two casters will have brakes.
Electrical hookup will be via a nine foot
long exible three wire 12/3 SJO cord with
molded NEMA 5-20P, 115v plug.
Cabinet to have limited two year parts
and labor warranty.
Cabinet to be to be UL and C-UL listed
and UL EPH classied.
NEMA 5-20P, 115V
MODEL
DIMENSIONS
(in.)
DIMENSIONS
(mm)
VOLTS
HEATING
UNIT
WATTS
3" LEDGE SPACING
(BOTTOM LOAD)
PAN CAPACITY
41/2" LEDGE SPACING
(BOTTOM LOAD)
PAN CAPACITY
MAX.
CABINET
STATIC
LOAD
(LB/KG)
SHIP
CU.
FT.
SHIP
WT.
(LB/
KG)L D H L D H
18 x 26
END
LOAD
12 x 20
SIDE
LOAD
18 x 26
END
LOAD
12 x 20
SIDE
LOAD
HP6A-LX 263/4321/4713/4679 819 1822 115 1900 17 34 12 24 370/168 44.0 190/86
PAN CONFIGURATION
The above tray/pan sizes can be
loaded in the same cabinet.