USER GUIDE
533333iCart One Push Trolley
v1 July 2020
To activate the foot brake, push
down on the foot brake lever. Push
down on the lever again to release.
The umbrella holder screws onto the
umbrella holder mount. Adjust and
tighten to the desired position.
The umbrella holder can be stored
away when not in use by using the
umbrella holder storage clip on the
underside of the trolley handle.
If the iCart pulls to the left or the right
during use, you can alter the front
wheel alignment to correct this issue.
See Fig. 2 and 3
If your iCart pulls to the left, using the
supplied Allen wrench, turn the right
adjustment bolt clockwise. Balance
adjustment between both sides to
eliminate pulling.
If your iCart pulls to the right, using the
supplied Allen wrench, turn the left
adjustment bolt counter clockwise.
Balance adjustment between both
sides to eliminate pulling.
FOOT BRAKE UMBRELLA HOLDER
FRONT WHEEL ALIGNMENT & ADJUSTMENT
533333iCart One Push Trolley
v1 July 2020
Fig. 6 Fig. 7 Fig. 8
Fig. 1 Fig. 2 Fig. 3
Cleaning & maintenance
Please follow these simple guidelines
to help protect your trolley:
- Do not store your trolley outside
- Wipe excess water and dirt away with a damp cloth prior to storage
- Never use a pressure washer to clean your trolley
- Lubricate moving components every 6 months
Gordano Gate
Serbert Road
Portishead
BS20 7GG
United Kingdom
