Mastervolt MasterBus Power Interrupter User manual

USERS MANUAL / GEBRUIKERSHANDLEIDING
BETRIEBSANLEITUNG / MANUEL D’UTILISATION
MANUAL DE UTILIZACION / INSTRUZIONI PER L’USO
MasterBus Power Interrupter
Switch off (part of) MasterBus network for power saving
MASTERVOLT
Snijdersbergweg 93,
1105 AN Amsterdam
The Netherlands
Tel.: [phone]
Fax.: [phone]
www.Mastervolt.com
Copyright © 2015 Mastervolt v 1.0 May 2015
ENGLISH: PAGE 1

2May 2015 / MasterBus Power Interrupter / EN
1 GENERAL INFORMATION
1.1 Use of this manual
Copyright © 2015 Mastervolt. All rights reserved.
Reproduction, transfer, distribution or storage of part
or all of the contents in this document in any form
without the prior written permission of Mastervolt is
prohibited.
This manual serves as a guideline for the safe and
effective operation of the MasterBus Power
Interrupter.
Keep this manual at a secure place!
1.2 Guarantee specifications
Mastervolt guarantees that this product was built
according to the legally applicable standards and
stipulations. If you fail to act in accordance with the
regulations, instructions and stipulations in this
user’s manual, damage can occur and/or the
product will not fulfil the specifications. This may
mean that the guarantee will become null and void.
The standard guarantee period is two years after
date of purchase.
1.3 Liability
Mastervolt can accept no liability for:
consequential damage due to use of the
MasterBus Power Interrupter;
possible errors in the manuals and their results;
Use that is inconsistent with the purpose of the
product.
CAUTION!
Never remove the identification label.
2 FUNCTION
The MasterBus Power Interrupter is designed to
switch off (part of) the MasterBus network to reduce
power drain from, for instance, a battery. An internal
relay (dis)connects MasterBus power between the
two MasterBus connectors.
The MasterBus Power Interrupter operation is
entirely MasterBus based. See www.mastervolt.com
for information about MasterBus and the MasterBus
event structure. The table below shows the
functions.
Monitoring Description Default Range
State Part of MasterBus network can be switched on
(Activated) or off (Standby). Read only. Activated Activated/ Standby
Control Button to change the State. Activated Activated/ Standby
Configuration
General
Language Set the MasterBus Power Interrupter menu
language English See specifications
Device name Any name you wish with 12 characters max Depowering 12 characters max
Events locked Check box for installers to lock event
configuration. Only operable by installers. Unchecked Unchecked/ Checked
Configuration Startup
Startup Select condition at Startup. On On/ Off/ Last
Event commands
Activate The MasterBus Power Interrupter can be
switched on (Activated) or off (Standby) with this
Event command.
- -
MPC stop Do not use. - -
MPC reduce Do not use. - -

EN / MasterBus Power Interrupter / May 2015 3
3 INSTALLATION
3.1 Overview
Insert the MasterBus cables, see below.
Functional scheme of the MasterBus Power Interrupter.
3.2 Operation.
One (free choice) of the MasterBus connectors
should be connected to a MasterBus powering
device, like a MasterBus USB Interface or Mass
Charger, with a MasterBus cable.
The other MasterBus connector should be
connected to a non-powering device like a
MasterView Easy display. You will then be able to
disconnect the MasterView Easy display from
MasterBus power. Every non-powering MasterBus
device will be disconnected from MasterBus power
attached to this connection.
The default start-up configuration is “On”. This
means that MasterBus Power is available (switched
on) in a start-up situation. This setting can be
changed to “Off” or “Last” in the configuration page
of MasterBus. Use “Last” if you want the MasterBus
Power Interrupter to remember the last state in a
start-up situation.
The MasterBus Power Interrupter can be used to
make a segregation between powering and non-
powering devices on a MasterBus network. By doing
so, you can manually switch the MasterBus Power
off by changing the device state to standby using the
control button in the monitoring page of MasterBus.
Events are available to change the device state
automatically. MasterBus Power (non-powering
devices) can be switched off (Standby) when, for
instance, a low battery situation is detected in a
MasterShunt or Mass Combi.
1. Communication LED, illuminating when
the state is “Activated”
MasterBus connector
Function:
“Standby”: Relay is open Switched off
MasterBus Power.
“Activated”: Relay is closed Switched
on Masterbus Power.

4 SPECIFICATIONS
Model: MasterBus Power Interrupter
Article number: 77031550
Delivery also includes: MasterBus cable, MasterBus Terminating device, User’s manual
Function of instrument: Switching off (part of) MasterBus network for power saving
Languages available: English
Power consumption: 132 mW
MasterBus Powering: No
Din rail mounting: Yes, Din rail 30 mm [1.2 inch]
Protection degree: IP 21
Dimensions: 66 x 78 x 32 mm [2.6 x 3.1 x 1.3 inch]; see drawing below
Weight: Approx. 80 gr [0.18 lb]
= MasterBus connector
Dimensions in mm (inch) and connections
4,5 [0.18]
69 [2.7]4.0 [0.16]
33 [1.3]
33 [1.3]
6.0 [0.24]
78 [3.1]
32 [1.3]
4.0 [0.16]
Snijdersbergweg 93, 1105 AN Amsterdam, The Netherlands
Tel : + 31-20-3422100
Fax : + 31-20-6971006
Email : [email protected]