Matco Tools MTCPUBTABLE User manual

MTCPUBTABLE
MESA DE PUB MATCO
MATCO PUB TABLE
PUB TABLE ASSEMBLY INSTRUCTIONS
PARTS LIST
1. ALLEN WRENCH (1)
2. ALLEN HEAD SHORT SCREWS (5)
3. ALLEN HEAD LONG SCREWS (3)
4. ADJUSTABLE FOOT PADS (5)
5. TABLETOP (1)
6. BOTTOM MOUNTING PLATE (1)
7. CENTER POST (4)
8. TABLETOP MOUNTING PLATE (1)
9. FOOT REST (1)
10. CHROME CAP (1)
11. 5-LEGTABLE BASE (1)
PG.1

PG.2
STEP 1:
Screw the adjustable foot pads
into the 5-leg table base until
the base sits flat on the
ground.
STEP 2:
Place the chrome cap on the
center sections of the 5-leg
table base.
STEP 3:
Slide the open end of the center post into the
footrest, and then slide the center post into the
5-leg table base.
STEP 4:
Attached the bottom mounting plate to
the bottom of the 5-leg table base and
center post using 1 of the supplied
Allen head long screws 2 .
STEP 5:
Attached the table top mounting plate
to the end of the center post using 2 of
the supplied Allen head long screws 2
STEP 6:
Lay the pub table top face down on a
clean, flat surface. Flip over the pub
table base/cener post and place it on
the back of the pub table top. Align the
holes and attach using 4 of the
supplied Allen head short screws 1 .