Matrix Setu ATA211G User manual

SETU ATA211G
Quick Start
http://ArtTel.ru

Disclaimer
Matrix Comsec reserves the right to change, at any time, without prior notice, the
product design, specifications, components, as engineering and manufacturing may
warrant.
This is a general documentation for all models/configurations of the product. The
product may not support some of the features/facilities described in this document.
While every reasonable effort has been made to ensure accuracy of content in this
document, Matrix Comsec assumes no responsibility for errors or omissions that
may occur herein. No liability is assumed for damages, costs, expenses resulting
from unauthorised modifications or repairs to the product; failure to use information
or to comply with the installation, operation and maintenance instructions contained
in this document.
Copyright
All rights reserved. No part of this document may be copied or reproduced in any
form or by any means without the prior written consent of Matrix Comsec.
Version 2
Release date: February 2, 2011
http://ArtTel.ru

SETU ATA211G
VoIP-FXS-GSM Adaptor
Quick Start
Package Contents
• SETU ATA211G with Antenna
• Adapter 12V, 1.25 Amp
• Ethernet Cables (RJ45)
• Two wall mounting screws and screw grips
• Warranty Card
• External Antenna SMA with Cable
• Quick Start and User Card
• CD (System Manual, Quick Start and User Card)
http://ArtTel.ru

4
Thank you for choosing SETU ATA211G! Please read the instructions in this Quick
Start to install and configure the basic settings.
Connecting SETU ATA211G
Select an appropriate site and mount SETU ATA211G.
Do not install the system at the places where shocks or vibrations are frequent or strong.
Use only the power adapter included in the SETU ATA211G package. Using an alternative non-
qualified power adapter may possibly damage the unit.
• Connect a standalone PC/ LAN Switch to the LAN Port of SETU ATA211G
using the Ethernet cable.
• Connect the WAN Port of SETU ATA211G to the IP Network—A DSL modem/
router or LAN Switch—using the Ethernet cable.
DSL Modem/
Router
PC/LAN
IP
Power
Adaptor
http://ArtTel.ru

5
• Connect a telephone to the FXS Port of SETU ATA211G, using a standard
telephone cable with an RJ11 plug.
• Screw the antenna on to the antenna connector.
• Insert SIM Card into the SIM holder of the Mobile Port of SETU ATA211G. To do
this,
• press the SIM holder lock (the small yellow button). You may use a blunt pin
to press the lock button.
• the SIM holder tray emerges from its slot.
• pull out SIM holder tray from its slot.
• now, fit the SIM Card on the tray, with its contact side facing up.
• insert the SIM holder tray back into the slot.
• Connect the power adapter provided with SETU ATA211G to the power jack
labeled 12VDC-1A(MAX).
• Connect the adapter plug into a power outlet.
• Switch ON power.
SIP2 SIP1 GSM FXS POWER
SIM
SIM
A
NTENNA
Press the yellow button
to release the SIM holder.
Insert SIM with contact side
facing up.
http://ArtTel.ru

6
Configuring SETU ATA211G
SETU ATA211G provides an embedded web server with a graphic user
Interface (GUI), Jeeves, for configuration. You can access this embedded web
server on the PC you connected to the LAN Port.
The default IP Address of the LAN Port of SETU ATA211G is: 192.168.002.21
The default Subnet Mask of the LAN Port of SETU ATA211G is: 255.255.255.0
• Make sure your PC is in the same Subnet as the LAN Port of SETU ATA211G.
Change the Subnet Mask of the PC, if necessary.
• Open a web browser (Internet Explorer Version 7 or higher or Mozilla Firefox 3.5
or higher) on the PC.
•Type192.168.002.21, the default IP Address of the LAN Port of SETU ATA211G
in the address bar of the browser.
The Login page opens.
http://ArtTel.ru

7
You can also use the WAN Port of SETU ATA211G to access the embedded web server in the
same manner.
The default IP Address of the WAN Port of SETU ATA211G is: 192.168.001.196
The default Subnet Mask of the WAN Port of SETU ATA211G is: 255.255.255.0
SETU ATA211G offers two Login modes: Admin and User.
•TheAdmin mode allows you to configure the entire system, access all
system features and facilities.
•TheUser mode allows you configure, set or cancel specific features and
facilities.
To configure SETU ATA211G,
• In the Login As box, select Admin.
• In the Password field, enter 1234, the default Admin password.
• Click Login button.
http://ArtTel.ru

8
• On successful login, the Home page will open.
The links Basic Settings, Advanced Settings, Supplementary Services and
Status, appear on the left pane.
Basic Settings are sufficient to get your SETU ATA211G into operation.
To set up and operate your system, quickly,
• Click Basic Settings link.
The links to the different basic parameters appear on the left pane.
You may either use the Wizard to guide you through the configuration or
selectively configure the Basic Settings pages.
http://ArtTel.ru

9
When you use the Wizard,
• Click the Wizard icon on the top right of your screen.
•TheNext button takes you to the next page, saving the changes you made on
the current page.
•TheBack button returns you to the previous page.
•TheMore button expands parameters on the page.
•TheLess button collapses parameters on the page.
•TheDefault button assigns factory set values to all the parameters on the page
•TheQuit button allows you to exit the Wizard at any stage. The changes
you made before exiting will be saved.
When you use selective configuration,
• Click Basic Settings link to expand.
• Click each parameter link, Region, SIP, Mobile, FXS, Passwords, Network.
The selected parameter page opens.
• Set the desired values on the page.
• Click Submit to save your settings on the page.
Read the System Manual for detailed instructions.
http://ArtTel.ru

10
http://ArtTel.ru

11
http://ArtTel.ru

Version 2, February 2011
MATRIX COMSEC PVT. LTD.
Corporate Office:
394-GIDC, Makarpura, Vadodara - 390010, India.
Tel.:[phone], Fax: [phone]
E-mail: [e-mail]
Factory:
39-GIDC, Waghodia - 391760, Dist. Vadodara, India.
Tel.: [phone]
Technical Support:
Tel.: [phone], Fax: [phone]
E-mail: [e-mail]
www.MatrixComSec.com
http://ArtTel.ru