2
Switching On your TV for the first time
Switching On your TV for the first time
1
This TV set has an automatic self tuning system
called “Plug & Play”. The first time this TV set is
switched on it will automatically begin searching
and storing all available channels in the memory.
Programme positions 1 to 6 are specially prepared
for the following stations in the U.K.
Programme position 1 : BBC1
Programme position 2 : BBC2
Programme position 3 : ITV
Programme position 4 : CH4
Programme position 5 : CH5
Programme position 6 : SKY
If any of these are not available the programme
position will remain vacant. Any remaining channels
that are found will be stored from programme
position 7 onwards in the order that they are found.
In order for “Plug & Play” to operate you must
ensure the following.
1. You have plugged in your TV.
2. You have connected an aerial as described on
the back page, at this stage you do not need to
connect any AV equipment but may do so if you
wish.
You are now ready!
Simply press the mains On/Off button on the front
of the TV set.
The red power indicator will illuminate to show that
the power is on. A message will appear on the
screen while the “Plug & Play” feature is in
operation and various screens will be displayed as
the 6 specified channels are found. Once all
channels have been found the TV returns to
programme position 1.
The installation is now complete!
✎This procedure will only appear the very first time
the TV set is switched on.
✎If later you wish to add more channels or to move
their positions refer to the presetting section of
the instruction manual on pages 14~17.
Now I am searching and storing all
programmes Please wait.
Auto Tuning/Sorting
||||||||||||||-----------
Now I am searching and storing all
programmes Please wait.
Auto Tuning/Sorting
ITV found and stored!
NICAM
1
BBC1
This message
appears for 2
seconds when
one of the 6
specified
channels are
found.
Tuning is now
complete.
