Maurer WS48600L User manual

Wind-Solar Controller
1．Specifications
Product Model: WS48600L
System AC Voltage: 48V
Applied Battery Type: Valve Regulated Lead-Acid Battery
Applied Wind Power Unit: 600W/48V (12m/S)
Applied Solar Power Unit: 10A/48V
LED Display: Battery status, Wind-Solar Generate, Dump Load
Battery: normal, green light; low voltage, green flash; abnormal, green light off.
Generate: Wind powered, green flash; solar powered, red flash
Dump load: Battery start dump load when voltage is higher than
rated point, red LED light
Controller voltage drop: ＜5%
Static loss: ＜1%
Protection Functions: Battery Incorrect Pole Contact, Shortage,
High Voltage Protection
Dumper Included: 2 Ω Dumper
Working Environment: -40℃~+50℃
Size and Weight: 240ƒ182ƒ150, 3.2 Kg
Indikabors

1
2．Structure and Appearance
Terminal Definition
3. Wire Installation and Points of Attention
Install at in-door or rain proof places, make sure air ventilation.
Hanging installation is suggested.
Connect terminal according to product sign!
Solar power unit and battery poles must be connected correctly!
Do not use dumper other than one provided within the package!
Make sure cables are thick enough, no lesser than 6mm2!
Do not short the circuit and please connect firmly!
Must connect wind power generator after batteries and dumper are connected!
Install dumper away from controller as far as possible.
Do not cover dumper and do not place inflammable items around dumper!
When strong wind, high temperature is around dumper, please select suitable location and installation!