Maxell MC-EX353E User manual

1QM00082-1
LCD Projector
User's Manual (detailed)
Operating Guide – Technical
MC-EX353E/MC-EX303E
Supported signals for COMPUTER IN
Resolution (H x V) Signal mode H. frequency
(kHz)
V. frequency
(Hz)
Rating
720 x 400 TEXT 37.9 85 VESA
640 x 480 VGA (60Hz) 31.5 59.9 VESA
VGA (72Hz) 37.9 72.8 VESA
VGA (75Hz) 37.5 75 VESA
VGA (85Hz) 43.3 85 VESA
800 x 600 SVGA (56Hz) 35.2 56.3 VESA
SVGA (60Hz) 37.9 60.3 VESA
SVGA (72Hz) 48.1 72.2 VESA
SVGA (75Hz) 46.9 75 VESA
SVGA (85Hz) 53.7 85.1 VESA
832 x 624 Mac 16” mode 49.7 74.5
1024 x 768 XGA (60Hz) 48.4 60 VESA
XGA (70Hz) 56.5 70.1 VESA
XGA (75Hz) 60 75 VESA
XGA (85Hz) 68.7 85 VESA
1152 x 864 1152 x 864 (75Hz) 67.5 75 VESA
1280 x 768 WXGA (60Hz) 47.7 60 VESA
1280 x 800 1280 x 800 (60Hz) 49.7 60 VESA
1280 x 1024 SXGA (60Hz) 64 60 VESA
SXGA (75Hz) 80 75 VESA
SXGA (85Hz) 91.1 85 VESA
1366 x 768 WXGA (60Hz) 47.7 59.8 VESA
1440 x 900 WXGA+ (60Hz) 55.9 59.9 VESA
1600 x 900 WXGA++ (60Hz) 60 60 VESA
1400 x 1050 SXGA+ (60Hz) 65.2 60 VESA
1600 x 1200 UXGA (60Hz) 75 60 VESA
1920 x 1080 Full HD (60Hz) 67.5 60 VESA

2QM00082-1
Supported signals for HDMITM
Resolution (H x V) Signal mode H. frequency
(kHz)
V. frequency
(Hz)
Rating
720 x 400 TEXT 37.9 85 VESA
640 x 480 VGA (60Hz) 31.5 59.9 VESA
VGA (72Hz) 37.9 72.8 VESA
VGA (75Hz) 37.5 75 VESA
VGA (85Hz) 43.3 85 VESA
800 x 600 SVGA (56Hz) 35.2 56.3 VESA
SVGA (60Hz) 37.9 60.3 VESA
SVGA (72Hz) 48.1 72.2 VESA
SVGA (75Hz) 46.9 75 VESA
SVGA (85Hz) 53.7 85.1 VESA
832 x 624 Mac 16” mode 49.7 74.5
1024 x 768 XGA (60Hz) 48.4 60 VESA
XGA (70Hz) 56.5 70.1 VESA
XGA (75Hz) 60 75 VESA
XGA (85Hz) 68.7 85 VESA
1152 x 864 1152 x 864 (75Hz) 67.5 75 VESA
1280 x 768 WXGA (60Hz) 47.7 60 VESA
1280 x 800 1280 x 800 (60Hz) 49.7 60 VESA
1280 x 1024 SXGA (60Hz) 64 60 VESA
SXGA (75Hz) 80 75 VESA
SXGA (85Hz) 91.1 85 VESA
1366 x 768 WXGA (60Hz) 47.7 59.8 VESA
1440 x 900 WXGA+ (60Hz) 55.9 59.9 VESA
1600 x 900 WXGA++ (60Hz) 60 60 VESA
1400 x 1050 SXGA+ (60Hz) 65.2 60 VESA
1600 x 1200 UXGA (60Hz) 75 60 VESA
720(1440) x 480i 480i 15.7 60 CEA
720(1440) x 576i 576i 15.6 50 CEA
720 x 480p 480p 31.5 60 CEA
720 x 576p 576p 31.3 50 CEA
1280 x 720p 720p (50Hz) 37.5 50 CEA
720p (60Hz) 45 60 CEA
1920 x 1080i 1080i (50Hz) 28.1 50 CEA
1080i (60Hz) 33.8 60 CEA
1920 x 1080p 1080p (50Hz) 56.3 50 CEA
1080p (60Hz) 67.5 60 CEA
Supported signals

3QM00082-1
Supported signals
NOTE • Be sure to check jack type, signal level, timing and resolution before connecting this
projector to a PC.
• Some PCs may have multiple display screen modes. Use of some of these modes will not be possible with
this projector.
• Depending on the input signal, full-size display may not be possible in some cases. Refer to the number of
display pixels above.
• The signal will be converted to the projector’s panel resolution before being displayed. The best display
performance will be achieved if the resolutions of the input signal and projector panel are identical.
• Automatic adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a composite sync or a sync on G.
•
The illustrations in this manual are for illustrative purposes. They may differ slightly from your projector.

4QM00082-1
Connection to the ports
Connection to the ports
NOTICE Ź8VHWKHFDEOHVZLWKVWUDLJKWSOXJVQRW/VKDSHGRQHVDVWKH
input ports of the projector are recessed.


 
ACOMPUTER IN1, BCOMPUTER IN2/MONITOR OUT
D-sub 15pin mini shrink jack
<Computer signal>
9LGHRVLJQDO5*%VHSDUDWH$QDORJ9SSȍWHUPLQDWHGSRVLWLYH
+9V\QFVLJQDO77/OHYHOSRVLWLYHQHJDWLYH
&RPSRVLWHV\QFVLJQDO77/OHYHO
<Component video signal>
• Video signal:
-Y, Analog, 1.0±0.1Vp-p with composite sync,ȍWHUPLQDWHG
-Cb/Pb, Analog, 0.7±0.1Vp-p,ȍWHUPLQDWHG
-C
r /P r , Analog, 0.7±0.1Vp-pȍWHUPLQDWHG
System: 480i@60, 480p@60, 576i@50, 576p@50, 720p@50/60, 1080i@50/60, 1080p@50/60
Pin Signal Pin Signal
1Video Red, Cr/Pr 9(No connection)
2 Video Green, Y 10 Ground
3 Video Blue, Cb/Pb 11 (No connection)
4 (No connection) 12 A: SDA (DDC data), (No connection)
5 Ground B: (No connection)
6 Ground Red, Ground Cr/Pr 13 H. sync / Composite sync., (No connection)
7 Ground Green, Ground Y 14 V. sync., (No connection)
8 Ground Blue, Ground Cb/Pb 15 A6&/''&FORFN(No connection)
B: (No connection)
A
B

5QM00082-1
Connection to the ports (continued)
CVIDEO
RCA jack
6\VWHP176&3$/6(&$03$/03$/1176&3$/+]
9SSȍWHUPLQDWRU
DHDMI
• Type :HDMITM connector
$XGLRVLJQDO/LQHDU3&06DPSOLQJUDWHN+]
Pin Signal Pin Signal Pin Signal
1 T.M.D.S. Data2 + 8 T.M.D.S. Data0 Shield 15 6&/
2 T.M.D.S. Data2 Shield 9 T.M.D.S. Data0 - 16 SDA
3 T.M.D.S. Data2 - 10 T.M.D.S. Clock + 17 DDC/CEC Ground
4T.M.D.S. Data1 + 11 T.M.D.S. Clock Shield
18 +5V Power
5 T.M.D.S. Data1 Shield 12 T.M.D.S. Clock - 19 Hot Plug Detect
6 T.M.D.S. Data1 - 13 CEC
7 T.M.D.S. Data0 + 14 Reserved(N.C. on device)
19 17 15 13 11 9 7 5 3 1
18 16 14 12 10 8 6 4 2
D
C

6QM00082-1
Connection to the ports (continued)
AUDIO IN
E
R,
F
L AUDIO OUT
G
RCA jack x2 Stereo mini jack x1
NWHUPLQDWRU NRXWSXWLPSHGDQFH
F
GE

7QM00082-1
H
Connection to the ports (continued)
H
CONTROL
D-sub 9pin plug
• About the details of RS-232C communication,
please refer to the next chapter.
Pin Signal Pin Signal Pin Signal
1 (No connection) 4 (No connection) 7 RTS
2 RD 5 Ground 8 CTS
3 TD 6 (No connection) 9 (No connection)
6
54321
987

8QM00082-1
To input component video signal to COMPUTER IN ports
ex.
Connection to the ports (continued)
To input component video signal to the COMPUTER IN1or COMPUTER IN2 port
of the projector, use a RCA to D-sub cable or adapter.
For about the pin description of the required cable or adapter, refer to the
descriptions about COMPUTER IN1and COMPUTER IN2 port (4).
Y CB/PBCR/PR
COMPONENT VIDEO OUT
RCA plugs
D-sub plug
VCR/DVD/Blu-ray
Disc player
RCA connectors

9QM00082-1
RS-232C Communication
RS-232C Communication
When the projector connects to the computer by RS-232C communication, the
projector can be controlled with RS-232C commands from the computer.
For details of RS-232C commands, refer to RS-232C Communication command
table (12).
Connection
1. Turn off the projector and the computer.
2. Connect the projector's CONTROL port and the computer's RS-232C port
ZLWKD56&FDEOHFURVV8VHWKHFDEOHWKDWIXO¿OOVWKHVSHFL¿FDWLRQ
VKRZQLQ¿JXUH
3. Turn the computer on, and after the computer has started up turn the projector
on.
CD (1) (1) ٕ
RD(2) (2) RD
TD (3) (3) TD
DTR (4) (4)
ٕ
GND (5) (5) GND
DSR (6) (6)
ٕ
RTS (7) (7) RTS
DTS (8) (8) CTS
RI (9) (9)
ٕ
CONTROL port
of the projector
RS-232C port
of the computer
1
2
43
8
9
5
76 6
54321
987
RS-232C Cable
(cross)
CONTROL
RS-232C

10 QM00082-1
RS-232C Communication (continued)
Communication settings
1. Protocol
19200bps,8N1
2. Command format ("h" shows hexadecimal)
Byte Number 01 2 3456 789101112
Command
Action
Header Data
Header
code
Packet
Data
size
CRC
ÀDJ Action Type Setting code
/H/H/H/H/H/H
<SET> Change setting to
GHVLUHGYDOXH>E/E+@
E\>F/F+@
BEh EFh 03h 06h 00h
D/ (aH) 01h 00h E/ (bH) F/ (cH)
<GET> Read projector
LQWHUQDOVHWXSYDOXH>E/
E+@
D/ (aH) 02h 00h E/ (bH) 00h 00h
<INCREMENT>
Increment setup value
>E/E+@E\
D/ (aH) 04h 00h E/ (bH) 00h 00h
<DECREMENT>
Decrement setup value
>E/E+@E\
D/ (aH) 05h 00h E/ (bH) 00h 00h
<EXECUTE> Run a
FRPPDQG>E/E+@.
D/ (aH) 06h 00h E/ (bH) 00h 00h
[Header code], [Packet], [Data size]
6HW>%(K()KKKK@WRE\WHQXPEHU
~ 4.
>&5&ÀDJ@
For byte number 5, 6, refer to RS-232C Communication command table (12) .
[Action]
Set functional code to byte number 7, 8.
<SET! >KK@GET! >KK@INCREMENT! >KK@
<DECREMENT! >KK@EXECUTE! >KK@
Refer
to the command table above.
[Type], [Setting code]
For byte number 9~12 , refer to RS-232C Communication command table (12) .