MaxiiCopper Vi2400WP User manual

Application Drawing
Vi2400WP Ethernet Extender over UTP Installation Manual
IP Camera-end Installation
The Smart Choice for Transmission Solutions www.vigitron.com
Important Safety Warning
Standard Ethernet Connection:
The Vi2400WP need to be powered by PoE from the control room side.
- Connect the IP camera RJ45 connector to the “Standard Ethernet” port
of Vi2400WP using a standard Cat5/6 cable of maximum 100m in length.
- Connect one end of the UTP cable to the “Standard Ethernet”
waterproof RJ45 connector of Vi2400WP.
In order to connect wires to the weatherproof connectors:
a- Unscrew the gasket and insert the UTP cable checking to confirm there is
no spacing between the wire and the insertion hole.
b- Connect the RJ45 cable and insert it into the RJ45 female connector on
the Vi2400WP's body making certain the connection is tight.
c- Reconnect the gasket by screwing into the Vi2400WP body making certain
to limit any wire slack.
Extended Ethernet Connection:
- Connect one end of the long Coax to waterproof BNC connector of the
“extended Ethernet” port on Vi2400WP.
In order to connect wires to the weatherproff connectors:
a- Unscrew the gasket and insert the Coax cable checking to confirm there is
no spacing between the wire and the insertion hole.
b- Connect the BNC connector and insert it into the Coax female connector
on the Vi2400WP's body making certain the connection is tight.
c- Reconnect the gasket by screwing into the Vi2400WP body making certain
to limit any wire slack. limit any wire slack.
The MaxiiCopper Model Vi2400WP is a transmission device with IP67
weather proof packaging that extends full-duplex high-speed Ethernet and
PoE over existing Coax infrastructures. It extends 10BaseT signals up to
3,000 feet (914m) and 100BaseT up to 1,500 feet (457m). It employs
MaxiiCopper innovative and unique Ethernet extension technology that is
designed to take full advantage of high-bandwidth networking cables and
maintain a full-duplex of 10 or 100 Mb/s Ethernet connection up to the
maximum range with minimum transmission error and latency.
Pass Through PoE (PTP™) eliminates the need for additional remote site
power while allowing a single PoE source, such as a PoE network switch, to
provide power to both transceivers and the camera. This feature eliminates
the need for local and remote site power supplies. The Vi2400WP is type
tested under NEMA-TS2 environmental standards for extended temperature
operations between -40C° to +75C°, the Vi2400WP is the perfect solution
for extended distance data and power transmission for warehouses, parking
lots, campuses, casinos, and many more.
Installation cost savings, proven performance, and major camera brand
compatibility all go into making Vigitron’s MaxiiCopper™ Vi2400WP your
best choice for extended distance data and power transmission.
WARNING! - To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture. This apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases shall be placed on the apparatus.
WARNING! - This apparatus is a Class I product. This product must be connected to a
mains socket outlet thru an AC to DC Power supply.
WARNING! - The mains plug is used as the disconnect device and shall remain readily
operable.
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
- Read and keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer’s instructions.
- This installation should be made by a qualified service person and should conform to all local
codes.
- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage wiring.
- To reduce the risk of fire or electrical shock, do not expose these products to rain, moisture,
dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron equipment.
- DO NOT install the unit in a place where the operating ambient temperature exceeds 75°C or
is below - 40°C.
- Make sure that the external power supply output voltage is in the recommended range.
- Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus that produce heat.
- Protect the power cord from being walked on or pinched particularly at power source,
convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as when a power supply cord or plug is damaged, liquid
has been spilled, objects have fallen inside the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
- The main plug is used as the disconnect device and shall remain readily operable.
Vi2400WP_UM
Ethernet Switch/Midspan-end Installation
The other end of long Coax cable can be connected to several different
Vigitron Extenders. Please follow the installation guide for the selected
device.
Maxii Copper
TM
Transmitting Ethernet and PoE over Extended Coax Cables
Network Switch
Data + PoE
328 ft. (100m)
PoE Cameras
Data + PoE
328 ft. (100m)
Data + PoE
Extended Coax
Data + PoE
Extended Coax
Data + PoE
Extended Coax
Vi2400A
Data + PoE
328 ft. (100m)
Vi2400A
Vi2400WP PoE Cameras
Data + PoE
328 ft. (100m)
Vi2400WP
Vi2400WP
Vi2400WP

Limited Lifetime Warranty
Vigitron, Inc. warrants that all Vigitron products (“Product”), if used in accordance with these
instructions, will be free of defects in material and workmanship for lifetime defined as the
duration period of time until product end of life is announcement. After which Vigitron will
continue to provide warranty services for a period of 3 years. Period covering valid warranty
will be determined by proof of purchase in the form of an invoice from an authorized Vigitron
dealer.
Warranty will only be provided for as long as the original end user purchaser owns the product.
Warranty is not transferrable. At Vigitron's option, defective product will be repaired, replaced
or substituted with a product of equal value. This warranty does not apply if, in the judgment of
Vigitron, Inc., the Product fails due to damage from shipment, handling, storage, accident,
abuse or misuse, or if it has been used or maintained not conforming to Product manual
instructions, has been modified, or serial number removed or defaced. Repair by anyone other
than Vigitron, Inc. or an approved agent will void this warranty. Vigitron, Inc. shall not under
any circumstances be liable to any person for any incidental, indirect or consequential
damages, including damages resulting from use or malfunction of the product, loss of profits or
revenues or costs of replacement goods. The maximum liability of Vigitron, Inc. under this
warranty is limited to the original purchase price of the Product only.
Technical Specifications
RoHS
TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205
7810 Trade Street, Suite 100, San Diego, CA 92121, USA • [email protected] • www.vigitron.com
© Copyright 2021 Vigitron, Inc.
Electrical
Ethernet Interface Standard 10/100BaseT
Data Rate Auto select 10/100 Mb/s
Full speed / full duplex at maximum rated distance
Coax 1,500 feet (454 m) at 100BaseT with PoE
Power 1.8 W w/POE af/at, 1.5 W
Consumption
Connectors RJ45 x 1
BNC x 1
Surge Protection 6Kv
RFC 2544 TCP/IP Packet Transmission
PoE Compatibility IEEE 802.3af, IEEE 802.3at
RFC 768 UDP, 2068 HTTP, 793 TCP
791 IP, 1783 TFTP, 894 IP over Ethernet
Jumbo Frame Support Yes
Regulatory
FCC Part 15, Subpart , Class B 2010
Emissions EN 5502:2006+A1:2007,
EN 61000-3-2:2006+A1:2009+A2:2009
EN 61000-3-3:2008, EN 55024:1998+A1:2001+A2:2003
Safety CE
Environmental RoHS
Environmental
Humidity 0 to 95%, non-condensing
Temperature Operating: -40°C to +75°C per NEMA-TS2 testing**
Storage: -40°C to +85°C
Environment IEC60068-252 Salt Laden
Mechanical
Dimensions 1.81x3.27x1.58 in., 4.59x8.31x4.01 cm (HxWxL)
Weight 0.56lb (254g)
Material Extruded Aluminum
**Vigitron "W" are designed as self contained to comply with specific environmental standard. Operating in
conditions other than free air with proper ventilation will affect performance and may void warranty.
Ordering Information
1
RJ-45 Installation Instruction
Installing cable and connector is critical for maintaining the IP 67
performance of this product. Please follow instructions carefully.
Weatherproof RG45 Installation Instruction
PART No. Description
Vi2400WP 1-port IP67 Coax Ethernet Extender
Related Products
BNCB-P4SA-01(5C-FB) Installation Instruction
ID9.0mm Tube = CBAS-A-TUBE3.
ID8.0mm Tube = CBAS-A-TUBE2.
Weatherproof RG59 Installation Instruction
Vi2404A 4-port Coax Ethernet Extender
Vi2408A 8-port Coax Ethernet Extender
Vi2416A 16-port Coax Ethernet Extender
Part No. Description
Vi2400A Single port Coax Ethernet Extender
Vi2608 8-port Extended Coax Midspan
Vi2601 Single port Extended Coax Midspan
Vi2616 16-port Extended Coax Midspan
Vi0012 12 VDC Wall-mount Power Supply
Vi2401A Single port Mini Coax Ethernet Extender