Maxima DELUXE WT600 x 600 mm 09300950 User manual

Spangenberg International B.V. –Nijverheidsweg 19F –3641 RP Mijdrecht –Holland –T. [phone] –F. [phone]
[email protected] - www.maximaholland.com
MAXIMA
STAINLESS STEEL WORKTABLE
INSTALLATION MANUAL
INSTALLATIE HANDLEIDING
BEFORE USING THIS PRODUCT YOU SHOULD READ THIS USER MANUAL PROPERLY
LEES DEZE HANDLEIDING AANDACHTIG ALVORENS U DIT PRODUCT IN GEBRUIK NEEMT.

Spangenberg International B.V. –Nijverheidsweg 19F –3641 RP Mijdrecht –Holland –T. [phone] –F. [phone]
[email protected] - www.maximaholland.com
ENGLISH
Introduction
Thank you for purchasing this Maxima product. To ensure optimal and safe use, please read these instructions
completely before attempting to install or use this product
All Maxima products are manufactured with great care and are CE certified. As a result, our products meet the
legal requirements within the European Union with regard to safety, health and the environment. In addition,
our products are tested and inspected prior to shipment to ensure product quality and safety.
The Maxima Stainless Steel Worktables are available in many different lenghts, in either 600 or 700 mm depth
and with or without backsplash. They can support a weight up to 200 kg and are low-maintenance, safe and easy
to assemble. Also, they can optionally be fitted with wheels (sold separately) for even more versatility.
At Maxima we are very proud of our products and are completely committed to providing you with the best
products and service possible. Your satisfaction is our number one priority.
We trust you will enjoy using this product and Thank You for choosing Maxima Kitchen Equipment as your
supplier. We hope you will consider Maxima for your future purchases.
NEDERLANDS
Introductie
Bedankt voor het aanschaffen van dit Maxima product. Deze instructies dienen volledig gelezen te worden
voordat u dit product gaat installeren of gebruiken. Op deze manier kunt u optimaal en veilig van dit product
gebruik maken.
Alle Maxima producten worden met grote zorgvuldigheid gefabriceerd en zijn CE gecertificeerd. Onze producten
voldoen hierdoor, onder andere op het gebied van veiligheid, gezondheid en milieu, aan de wettelijke eisen
binnen de Europese Unie. Daarnaast worden onze producten voor verzending getest en geïnspecteerd om
productkwaliteit en -veiligheid te kunnen waarborgen.
De Maxima RVS Werktafels zijn verkrijgbaar in veel verschillende lengtes, in 600 of 700 mm diepte en met of
zonder spatrand. Ze kunnen een gewicht tot 200 kg dragen, vergen weinig onderhoud, zijn veilig in gebruik en
eenvoudig te assembleren. Daarnaast optioneel uitgerust met wielen (apart verkrijgbaar) voor nog meer
veelzijdigheid.
Bij Maxima zijn wij erg trots op onze producten en zijn volledig gecommitteerd om u van de beste producten en
service te voorzien. Uw tevredenheid is onze eerste prioriteit.
We vertrouwen erop dat u dit product met plezier zult gebruiken en bedanken u voor uw keuze in Maxima
Kitchen Equipment als uw leverancier. We hopen dat u Maxima zult overwegen voor uw toekomstige aankopen.

Spangenberg International B.V. –Nijverheidsweg 19F –3641 RP Mijdrecht –Holland –T. [phone] –F. [phone]
[email protected] - www.maximaholland.com
ENGLISH
Specifications
MAXIMA STAINLESS STEEL
WORK TABLE ‘DELUXE’
MAXIMA STAINLESS STEEL WORK TABLE
‘DELUXE’ WITH BACKSPLASH
Product Code
Model
Product Code
Model
09300950
WT 600 x 600 mm
09300974
WTB 600 x 600 mm
09300953
WT 800 x 600 mm
09300977
WTB 800 x 600 mm
09300956
WT 1000 x 600 mm
09300980
WTB 1000 x 600 mm
09300959
WT 1200 x 600 mm
09300983
WTB 1200 x 600 mm
09300962
WT 1400 x 600 mm
09300986
WTB 1400 x 600 mm
09300965
WT 1600 x 600 mm
09300989
WTB 1600 x 600 mm
09300968
WT 1800 x 600 mm
09300992
WTB 1800 x 600 mm
09300971
WT 2000 x 600 mm
09300995
WTB 2000 x 600 mm
09364000
WT 600 x 700 mm
09364024
WTB 600 x 700 mm
09364003
WT 800 x 700 mm
09364027
WTB 800 x 700 mm
09364006
WT 1000 x 700 mm
09364030
WTB 1000 x 700 mm
09364009
WT 1200 x 700 mm
09364033
WTB 1200 x 700 mm
09364012
WT 1400 x 700 mm
09364036
WTB 1400 x 700 mm
09364015
WT 1600 x 700 mm
09364039
WTB 1600 x 700 mm
09364018
WT 1800 x 700 mm
09364042
WTB 1800 x 700 mm
09364021
WT 2000 x 700 mm
09364045
WTB 2000 x 700 mm
First Time Use
•Unpack and inspect your machine immediately after receipt. If there are any latent defects or damage to
the machine then immediately contact your supplier. Save all packaging materials in case the machine
needs to be returned or inspected by the freight carrier.
•Remove any protective film from all surfaces (if applicable).
•Read this instruction manual completely before attempting to install and operate this product. When in
doubt, contact your supplier.
•Before using the appliance for the first time, it is recommended to clean the product (see chapter “Cleaning
and Maintenance”).
In the Box
Item
Quantity
Table Top
1
Leg
4
Shelf
1
M6 Bolt
12
M6 Washer
4
Ø 25 Washer
4
Hexagon Key
1

Spangenberg International B.V. –Nijverheidsweg 19F –3641 RP Mijdrecht –Holland –T. [phone] –F. [phone]
[email protected] - www.maximaholland.com
Installation
1. Place the worktop upsidedown on a flat and stable surface.
2. Mount the legs in the designated backets on each corner.
3. Fix the legs to the worktop using the supplied bolts.
4. Lower the bottom shelf into position.
5. Fix the shelf to the four legs using the remaining bolts.
6. Place the worktable in upright position.
Fixing wheels (sold separately)
A. Gently tap the foot from the leg, using a flathead screwdriver and hammer.
B. Remove the foot.
C. Twist and push the wheel into the leg. Consider where to place the wheels with brake.
D. Tighten the bolt (behind the wheel) to fix the wheel in position.

Spangenberg International B.V. –Nijverheidsweg 19F –3641 RP Mijdrecht –Holland –T. [phone] –F. [phone]
[email protected] - www.maximaholland.com
Cleaning and Maintenance
•ATTENTION! Never use aggressive cleaning agents or abrasives. Do not use solvents or petrol based cleaning
agents. Some cleaning agents may leave harmful residues or cause damage to the table.
•ATTENTION! Do not use any scourer and sharp or pointed objects during cleaning, this may cause damage
to the table.
•Clean using a damp cloth and a mild detergent or a designated stainless steel cleaning product. For more
tenacious residues a soft brush can be used. Always dry after cleaning, using a soft cloth.
Storage
•Make sure the table is cleaned properly before storage.
•Store in a dry place.
Discarding
•When discarding, do so in compliance with local, state and national regulations.
Guarantee
Thank you for using our products, our company will follow related provisions from our "Algemene
Voorwaarden", and provide you services when you can show us the invoice.
We provide 12-month warranty from the date of purchase (invoice date). In the warranty period, our company is
responsible for free parts if there is a device fault or quality problem of spare parts under correct operation.
The following is not included in the free service:
1. Damages result from transportation, installation, improper connections.
2. Component damages caused by failing to provide power and voltage as required in technical data.
3. Damages caused by disassembling products, adjust or change the mechanical and electrical structures
without permission.
4. Damage caused by improper operation, cleaning and maintenance.
5. Non-man-made damage, such as damages from abnormal voltage, fire, building collapse, lightning,
floods and other natural disasters, and damages from rats and other pests.
6. Failure in following the manual when operating.
7. Wearable and expendable parts.
8. Altered invoice or without invoice.
In line with our policy of continuous development, we reserve the right to alter the product, the packaging or the
documentation without prior notice.