Maxtor Digital Multiplex Recorder User manual

DigitalMultiplex Recorder
USER S MANUAL
777 WV1.0
Pleasereadtheinstructionsthoroughlybeforeoperation andretainit forfuturereference.

Thelightningflashwitharrowheadsymbol, withinanequilateraltriangle, isintendedtoalert
theusertothepresenceofuninsulated"dangerous voltage"withintheproduct'senclosurethat
may beof sufficient magnitudetoconstituteariskofelectricshocktopersons.
Theexclamationpointwithinanequilateraltriangleisintendedtoalert theuser tothepresence
of importantoperatingandmaintenance-(servicing) instructions intheliteratureaccompanying
theappliance.
All thesafetyandoperatinginstructionsshouldbereadbeforeoperation.Theimproperoperation maycause
permanentdamage.
Pleaseusetheprovidedadaptor (Otheradaptor isnotsuitableforthismachine).
Pleaseliftandplacethisequipmentgently.
Donotexposethisequipment toopensunlight.
Donotusethisequipmentnear wateror incontact withwater.
Donotspill liquidofanykind ontheequipment.
Pleasepowerdowntheunitbeforeunplugging.
DonotswitchthePowerOn&Off withinshortperiodoftime(within3seconds).
Donotattempttohavethisequipment servicedby yourself.
Installationshouldbemadebyqualified servicepersonnel.
WARNING

What DoYou Get
What DoYou Get ? ?
FEATURES--------------------------------------------------------------------------------------
PACKAGEINCLUDING----------------------------------------------------------------------
BeforeOperation
BeforeOperation
INSTALLATION GUIDE----------------------------------------------------------------------
FRONTPANEL----------------------------------------------------------------------------------
BACK PANEL-----------------------------------------------------------------------------------
BasicOperation
BasicOperation
STARTTHISUNIT------------------------------------------------------------------------------
OPERATION--------------------------------------------------------------------------------------
Detailed Menu Setup
Detailed Menu Setup
MENU ----------------------------------------------------------------------------------------------
ACCESS MENU ---------------------------------------------------------------------------------
MAIN MENU--------------------------------------------------------------------------------------
MENUOPTIONS--------------------------------------------------------------------------------
MOTION DETECTION-------------------------------------------------------------------------
NetworkSettingGuide
NetworkSettingGuide
HARDWARECONNECTION ATDMR SIDE--------------------------------------------
STATIC IPSETTING--------------------------------------------------------------------------
DYNAMIC IPSETTING------------------------------------------------------------------------
SOFTWAREOPERATION ATCLIENTSIDE---------------------------------------------
INTRODUCTION OFBASIC OPERATION ------------------------------------------------
PLAYBACK OPERATION----------------------------------------------------------------------
ADVANCED SETTING--------------------------------------------------------------------------
CONNECTVIDEOWEB SERVER VIA IEBROWSER----------------------------------
TABLEOFCONTENTS
1
1
2
3
5
6
6
8
9
9
10
15
17
18
224
34
35
37
38
41

TABLEOFCONTENTS
Advanced Operation
Advanced Operation
OPERATION OPTIONS-----------------------------------------------------------------------
KEYLOCK ----------------------------------------------------------------------------------------
TROUBLESHOOTING--------------------------------------------------------------------------
SPECIFICATIONS-------------------------------------------------------------------------------
Appendix
Appendix
APPENDIX#1 –INSTALL HDD---------------------------------------------------------------
APPENDIX#2 –RACK MOUNT---------------------------------------------------------------
APPENDIX#3 –RECORDINGSPEED------------------------------------------------------
APPENDIX#4 –PIN CONFIGURATIONS--------------------------------------------------
43
44
44
45
46
48
49
50

FEATURES
DMR Features
RemotecontrolviatheInternet
Wavelet CompressionFormat replacesTime-LapseVCR +Multiplexer
4Audioinputs/2Audiooutputs
OnScreenDisplay and RTC(Real timeclock)Function
Support from4channelsto7/9/10/13/16channelsvideoinputs
Picture-In-Picture(PIP) isavailableinliveandDMRplayback modes
Motiondetectionfunctionand4level videoqualityadjustableoneachchannel
AlarmInput &Output Function
Videoloss detectedoneachchannel canrecordupto160events
Power-loss memoryfunction
Support2RemovableHDDs, IDEType
Quick MultipleSearchbydate/time,alarm, full list
Securitypasswordprotection
1
WhatDoYouGet?
WhatDoYouGet?
Digital Multiplex Recorder(withHDD cartridge) User’sManual
2Keysfor Cartridge PowerAdapterandCord
NOTE : Pleasecheckthepackagetomakesurethatyoureceivethe completeaccessorieswhichincludesthe
componentsshownabove.
Accessoriespack
PACKAGEINCLUDING
CD-ROM

2
1. ConnectcamerasandmonitorwiththeDMR.
2.ShownbelowisoneexampleforconnectingtheDMRtoyourexistingObservation System.
3.Install HDDs(The compatibleHDD Brandsarelistedinthefollowingtable.)
Pleaserefer topage.46 Appendix#1for installationinstructions.
TheHDDsmustbeinstalledbeforethe DMRisturnedon.
INSTALLATION GUIDE
BeforeOperation
Manufacturer Model Capacity Rotation
HITACHI Deskstar180GXP(120GB) 120GB 7200rpm
HITACHI Deskstar7K250,HDS722516VLAT20 160GB 7200rpm
HITACHI Deskstar7K250,HDS722525VLAT80 250GB 7200rpm
IBM Deskstar120GXP(80GB) 80GB 7200rpm
IBM Deskstar120GXP(120GB) 120GB 7200rpm
Maxtor DiamondMax536DX(60GB)4W060H4 60GB 5400rpm
Maxtor DiamondMaxPlus9 80GB 7200rpm
Maxtor DiamondMaxPlus9, Model#6Y120L 120GB 7200rpm
Maxtor DiamondMaxPlus9, Model#6Y160L0 160GB 7200rpm
Seagate BarracudaATAIV, ST380021A 80GB 7200rpm
Seagate BarracudaATAV,ST3120023A 120GB 7200rpm
Seagate Barracuda7200.7Plus,ST3160023A 160GB 7200rpm
WesternDigital CaviarWD1200BB-00CAA1 120GB 7200rpm
WesternDigital CaviarWD2000BB-00DWA0 200GB 7200rpm
COMPATIBLEHARD DISK BRANDS
Alarm
Sensor MainMonitor
Power
Camera1 Camera16 CallMonitor
Audio Speaker

3
FRONTPANEL
REC
SELECT
MENU
ENTER
ZOOM SLOW
ALARM
HDD
Full
HDD
TIMER
PLAY
REC
Down
Left
Right
POWER
16
7
2 4 6
1 53
810 12 14
911 13 15
Up
1. REMOVABLEHDDCARTRIDGE
Pleaserefertopage.46Appendix#1.
2. MENU
PressMENU buttontoentermainmenu.
3. ENTER
PressENTERbuttonforconfirmation.
4. ZOOM
PressZOOM button toenlargethepicturedisplay.
5.
PressPIPbutton for PictureinPicturescreen.
6. SLOW
Toslowdownspeedofplaymode.
7. SELECT
PressSELECTbuttontoselectappointedcamera(1~16)todisplayonfullscreen mode.
8.
4channelsdisplay mode

4
9.
7,9,10,13channelsdisplay mode
10.
16channelsdisplaymode
11. LED LIGHT
TheLEDLight isON underthefollowingconditions.
HDD : HDD isactivated
HDD Full : HDD isfull
ALARM: Ifyouwant toturnoff theALARMLEDlight,pleaserefer topage.13andsetthe
Camera/ ALARMitemas OFF.(all ofthecamerasshouldbesetasOFF.)
TIMER:When Timer issetasEnabled
PLAY : OnPlaymode
REC: OnRecordingmode
12. CAMERA (1-16)
Press theCameraSelect(1-16)toselect specifiedcamera.
13. REC
Press REC tostart recording.
14. REW/ LEFT
REW:Under DMRplay mode, itcanplay videobackwardatdifferent speeds.(PressREWagaintoadjust
speedas 1,2,4, 8,16,32times)
Left :Undersetupmode, it works as Leftbutton.
15. PLAY
Press PLAYtoplayrecordedvideo.
16. STOP/ DOWN
STOP: Under DMRRecord/Playmode, it canstoptheaction.
DOWN: Undersetupmode, itworksasDownbutton.
17. PAUSE / UP
Pause: Under DMRplay mode, itcanpausetheaction.
UP:Under setupmode, it works as Upbutton.
18. FF / Right
FF:Itcan play videoforwardathighspeed,andpress FF againtoadjustspeedfrom1,2,4,8,16,32times.
Right: Under setupmode,it canworkas Rightbutton.
19. POWER
Press Power toturnON / OFFtheDMR.

5
1. POWER
Pleaseusetheprovidedadaptortoconnectpowercord(Otheradaptorsarenot suitableforthismachine).
2. EXTERNALI/O
Controlledremotelyby anexternaldeviceorcontrolsystem.
Alarminput,external I/ Oexplanation.
3. 75 / HI
WhenusingLoopfunction,please switchto HI. Ifyoudon’t useLoopfunctionordisconnect thevideo
input, pleasesetit as 75 .
4. VIDEOINPUT(1-16)
Connecttovideosource,suchascamera.
5. LOOP(1-16)
ConnectvideosignalbetweenInputportandLoopporttomakealoop.
6. AUDIOIN (1-4)
Connecttoaudiosource,suchasmicrophone.
IPS shouldbeset to25A(forNTSC)or18A(forPAL)
4audioinputs,butuserscanonlyselect1forrecording.
7. AUDIOOUT(R/L)
Connecttomonitor or speaker.
IPS shouldbeset to25A(forNTSC)or18A(forPAL)
with2monoaudiooutputsfromthesamesource.
8. MONITOR
ConnecttoMainmonitor.
9. CALL
ConnecttoCALL monitor.ShowtheSwitchDisplay.Whenthe alarmistriggered, thecall monitor will show
thetriggeredchannelforaperiodof time.
10.LAN
ConnectInternetby LANcable.
BACKPANEL
8 6 7
5
4
1 2 310 9

Connect theACPower CordwithPower Adapterandplugintoan electricaloutlet. TheRedLEDindicator lightwill be
ON andtheDMRisinStandbymode.
1.
PressthePowerbutton.ThePOWERLEDwill turnfromred toorange,andother redLEDindicatorswill turnON. It
takes approximately5to15secondstobootthesystemwiththemessage: “HDD Detecting ”. Onconnecting, the
POWERLEDwill changetogreen color,andtheAlarmLEDwill beON.
2.
6
BeforeusingtheDMR, pleasehavetheHDDsinstalledready.(refer toAppendix#1for installationorremovalofHDDs).
STARTTHISUNIT
BasicOperation
OPERATION
3. Beforeoperating theDMR, pleasesetupthesystemtimefirst. (for setting systemtime,pleaserefer topage.12).
NOTE : When HDD notfound”messageshowsup,pleaserefertoappendix#1.It mayresult fromthe
improperinstallationoftheHDD.
2002 JAN 0101:02:03
M●032GB080GB
RECORDING
TheDMRoffersavarietyofrecording modes, such ascontinuousrecording,scheduledtime,orbyevents.Youcanset up
recordingspeed and resolution. You cansettheseoptionsbyselectingMENU /RECORD beforerecording,pleasereferto
page.13.Undertherecordingstatus,ifpowerisoffaccidentally,recordedvideowill still bestoredintheHDDs.DMRwill
returntooriginal recordingsituationafterpowerisonagain.
Onthescreen,youwill findthedate,time, HDD recordingtype,theamountofavailableGBleft intheHDDsmemoryand
theletter “M”representsthemethodofrecordingthat isoccurring.
(OW: HDD Overwrite)
NOTE : 1. WhentheHDDsarefull underO/WRecordingmode,previousrecorded
filesmaybeoverwrittenwithout furtherwarning notices.
2.XXGB ontheleftsidemeanstheleft spaceintheMasterHDD andthatattherightsidemeans
theleft spaceintheSlaveHDD.
3.If theHDD’scapacityisonly5GB left, it will buzzfor3seconds;soasin4GB, 3GB,2GB and
1GB. IftheO/WRecording mode(NOTE 1)ison,it won’thavethewarningbuzzer.
Thereare4recordingmodes inwhichRecordingcanoccur :Alarm, Timer, ManualandMotionTrigger.
1. ALARMRECORDING
DMRistriggeredby analarminput.Indicatedby theletter “A”andwill showdiagramonthetriggeredchannel.
2. TIMERRECORDING
Recordingisscheduledby aTimer. Indicatedbytheletter “T”.
3. MANUALRECORDING
Recordingisinitiatedbymanuallypressingthe RECbutton.Indicatedby theletter “M”.
4. MOTION TRIGGERRECORDING
Recordingistriggeredbymotiondetection. Indicatedbytheletter “D”. Andshowdiagramonthetriggeredchannel.

PLAY
Press “PLAY ”button,theDMRwill showthelast recording.
1. FASTFORWARD (F.F. )& FASTREWIND(F.R.)
You canincreasespeedforFastForwardandRewind ontheDMR.
InthePlay mode,press ”►► ”oncetoget2Xspeedforwardandpress twice toget4Xspeed,…andthemaximum
speedcanreach32X.
Press ”◄◄ ”oncetoget1Xspeedrewindandpresstwicetoget 2Xspeed, …and themaximumspeedcanreach
32X.
2. SLOW FORWARD (S.F.)& SLOWREWIND (S.R.)
You canalsoslowdownthespeedsofForwardandRewind ontheDMR.
InthePlay mode,press theSLOWbuttonandyouwill enterSlowmode.
Press ”►► ”oncetoget1/2Xspeed forwardandpress twicetoget1/4Xspeed,…andtheslowest speedcanreach
1/32X.
Press ”◄◄ ”oncetoget1/2Xspeedrewindandpresstwicetoget1/4Xspeed, …andtheslowest speedcanreach
1/32X.
3. PAUSE
It will letyoupausethecurrent imagedisplayedonthescreen.
4. STOP
Press “STOP ”buttonunderallcircumstance, it will returnDMRtolivemonitoring mode.
5. IMAGEJOG DIAL
It will allowyoutomanuallyviewvideoframe-by-frame,oneimageatatime.
WhileinPLAY mode,press “PAUSE ”, itwill pausethescreen.
Press “►► ”buttontoadvancethefrozenscreenoneimageforward.
Press “◄◄ ”buttontomovebackoneimage.
CAMERASELECT(1--16)
Press CameraSelect(1-16) toselectappointedcameratodisplayonfull screenmode.
7

Detailed MenuSetup
MENU
8
LASTRECORD
FULL LIST
ALARMLIST
MOTIONLIST
TIMESEARCH
SEARCH
DAY
START
END
QUALITY
IPS
TIMER ENABLE
TIMER
HDDOVERWRITE
RECORDIPS
RECORDQUALITY
ALARMREC IPS
ALARMRECQUALITY
MOTION TRIGGERRECORD
RECORD
TITLE
DWELL
Brightness/Contrast/Color
ALARM
RECORD
CAMERA
AUDIOINPUT
INTAUDIBLE ALARM
EXTAUDIBLEALARM
MOTIONAUDIBLE ALARM
ALARMDURATION
DWELL TIME
MESSAGELATCH
TITLEDISPLAY
TIMEDISPLAY
TIME
NEWPASSWORD
CLEARHDD
SYSTEMRESET
SYSTEM EVENT
SEVER IP
GATEWAY
NET MASK
DNS
WEB PORT
RESET DEFAULT
NETWORK
MENU

TheMenuallowsyoutoconfigureyour DMRsettings.Pleasefollowthe
steps belowtoaccesstheMenu:
Pressthe Menu button.Thepasswordscreenwill appear: Password: 0000
Thedefault Passwordis0000.Pressthe EnterbuttontoaccesstheMenu.
To key-inthePassword,pressthe “Right”and “Left”buttons tomovebetweennumbers,andusethe “Up”
and “Down”buttonstoinputthenumber.
Pressthe ENTER buttononce thecorrect Passwordisentered.TheMENU options screenwill appear.
Note:If yougetamessage PasswordError”,youmightenteranincorrectpassword.
Thereare7optionsavailableintheMainMenu:
SEARCH --------Findrecordedlist
TIMER ----------SchedulingRecord
RECORD -------RecordModeSetup
CAMERA -------CameraChannel Setup
SYSTEM --------SystemSetup
EVENT ----------EventList
NETWORK------NetworkSetup
9
Outlinedbelowarethebuttonsusedfor Menusetting:
Up”and Down”:Scroll upanddownorchangevalueswhenan optionisselectedandisblinking
Left”and Right”:Scroll sideways withinamenuoption that has beenselected
ENTER: Selectsasubmenu/ anoptionunderasubmenuforbrowsing/ modification
MENU : Completes modificationofamenuoptionandexitsamenu
ACCESS MENU
MAIN MENU
NOTE :
(MENU)
►SEARCH
TIMER
RECORD
CAMERA
SYSTEM
EVENT
NETWORK

MENU OPTIONS
SYSTEM
10
1. AUDIOINPUT
Tochooseone of4channelstorecord.(canonlyselect1duringoperationforrecording)
2. INTAUDIBLEALARM
TosettheINTERNALAUDIBLEALARM. It will betriggedby eventoccurrencewhen
thesettingisON.
5. ALARMDURATION
Set thereaction timewhich was determinedby thelengthof
alarmmoderespondedtoabuzzer.Default settingis10sec.
Optionsare10SEC,15SEC,20SEC,30SEC,1MIN,2MIN,
3MIN,5MIN,10MIN,15MIN, 30MIN,ALWAYS.
6. DWELL TIME
DWELLTIMEisthetimeperiodthateachchannelsequentially
shownoncall monitor.
7. MESSAGELATCH
Toselect whethertheDMRmessages will disappearafter10
secor remainonscreen. NO isthedefaultsettingwhichthe
messages will goaway after10sec.
NOTE : Video loss, AlarmandMotionmessageswill beshown
thesameasAlarmDuration time.
8. TITLEDISPLAY
Tosetthetitleshownon monitorornot.
9. TIMEDISPLAY
TosetthetimeformatontheDMR.
10. TIME
Tosetthecorrect timeontheDMR.
3. EXTAUDIBLEALARM
TosettheEXTERNALAUDIBLEALARM. It will betriggedbyeventoccurrencewhen
thesettingisON.
(MENU)
SEARCH
TIMER
RECORD
CAMERA
►SYSTEM
EVENT
NETWORK
4. MOTIONAUDIBLEALARM
TosettheMOTION AUDIBLEALARM. It will betriggedby
motiondetectionoccurrencewhenthesettingisON.
(SYSTEM)
AUDIO INPUT:1
INTAUDIBLEALARM:ON
EXTAUDIBLEALARM:ON
MOTIONAUDIBLEALARM:ON
ALARMDURATION:10 SEC
DWELL TIME:02 SEC
MESSAGELATCH:NO
TITLEDISPLAY :ON
TIMEDISPLAY :Y/M/D
2003-JAN-02(THU)17:37:09
NEW PASSWORD:XXXX
CLEAR HDD :NO
SYSTEMRESET:NO

11. NEWPASSWORD :XXXX (Defaultpassword: 0000)
Toset thenewpassword.
12. CLEAR HDD
Deleteall thecontentsof your HDD. Whenyou choose “YES”onthisoption,you will bepromptedwiththe
questionshown: Press “”toclear HDD orpress ”◄”nottoclear HDD.
13. SYSTEMRESET
Reset thesystemtobooktothefactorydefault settings.
11
ALLDATAINHDD
WILL BE CLEARED
AREYOUSURE?
(◄: NO : YES)
SEARCH
Press ”ENTER”toconfirmSEARCH setup,andthescreenwill showthefollowing
options.
1. LASTRECORD
Playthelast recordedvideo.
2. FULLLIST
Showalistingofall recordedvideosortedby timeontheHDD.
D: Motion Recording
M: Manual Recordingtime
A: AlarmRecording time
T: Timer Recordingtime
M-HDD : StorageinMasterHDD
S-HDD : StorageinSlaveHDD
3. ALARMLIST
Showalistingofall recordedvideotriggeredby anAlarm.
NOTE: If thereisnoAlarmrecorded, thescreenwill
display EMPTY”.
4. MOTION LIST
Showalistingofall triggeredmotiondetections.
5. TIMESEARCH
Findvideorecordedonaspecificdatethatisentered.
(SEARCH)
►LASTRECORD
FULL LIST
ALARMLIST
MOTION LIST
TIMESEARCH
(MENU)
►SEARCH
TIMER
RECORD
CAMERA
SYSTEM
EVENT
NETWORK
►2002-JAN-01 02:32:03M-HDD
2002-JAN-03 01:02:03M-HDD
2002-JAN-05 21:12:24M-HDD
2002-JAN-12 12:57:38M-HDD
2002-JAN-13 16:16:39S-HDD
2002-JAN-15 23:55:23S-HDD
2002-JAN-22 18:22:13M-HDD
2002-JAN-25 12:52:03S-HDD
◄:PAGEUP:PAGEDOWN
M
M
A
T
D
M
T
D

12
TIMER
1. DAY
Select theday,ordaysoftheweek(Mon–Fri /Sat-Sun/Daily)thatyouwishtoschedule
theDMRtoautorecording.
NOTE: 1.SpecialDatecouldbe changed by “Enter”, “Up”and “Down”buttons.
2. Ifyouhaveselected thespecificdateandrecordingtimersetfromthat specificdaytoanewday,
thentheRecordingTimerSchedulewillbe setasawholeweek.ForspecificdateofRecordingTimer
Schedule, it isnotrecommended toset EndTimeover23:59. ForExample:IfyousetTimerSchedule
DayasSunday, andSTARTfrom11:30,butEndon 00:20,thenRecordingTimerScheduleissetas
fromeverySunday's11:30tonextSunday's00:20. Ifyou onlywanttosetRecordingTimerSchedule
fromeverySunday11:30toMonday00:20, then youshouldsetRecordingTimerScheduleasSunday
from11:30 to23:59, andMondayfrom00:00to00:20.
2. START
Select thestartingtimefor therecording.
3. END
Select thefinishingtimefor therecording.
4. QUALITY
Select theimagequalityfortherecording.Therearefour Qualitysettings :
BEST, HIGH, NORMALandBASIC.
5. IPS
StandforImagesPerSecondandit couldlet youseeRecordsubmenu
for moredetails.
NTSC 25A、15、08、04、02、01
PAL 18A、12、06、03、02、01
NOTE : A”means RecordwithAudio”.
6. TIMER ENABLE
Enables/ disablesTimerrecording function.
(TIMER)
DAYSTARTEND QUALITYIPS
DAILY00:0000:00BEST25A
DAILY00:0000:00BEST25A
DAILY00:0000:00BEST25A
DAILY00:0000:00BEST25A
DAILY00:0000:00BEST25A
DAILY00:0000:00BEST25A
DAILY00:0000:00BEST25A
TIMERENABLE: NO
(MENU)
SEARCH
►TIMER
RECORD
CAMERA
SYSTEM
EVENT
NETWORK

13
RECORD
1. HDD OVERWRITE
Select “YES”tooverwritepreviousrecordingvideoinHDD.
NOTE : Whenthe HDD isfullunderO/WRecording mode,previousrecordedfiles
maybeoverwrittenwithoutfurtherwarningnotices.
2. RECORDINGIPS
Select theimagespersecondof recording.Theoptions are
asfollowing:
NTSC 25A、15、8、4、2、1
PAL 18A、12、6、3、2、1
NOTE : A”means RecordwithAudio ”.
3. RECORDINGQUALITY
Therearefourqualitysettings:BEST,HIGH, NORMALandBASIC.
4. ALARMRECIPS
Select theimagespersecondof recordingduringanAlarm.Theoptionsareasfollowing:
NTSC 25A、15、8、4、2、1
PAL 18A、12、6、3、2、1
NOTE : A”means RecordwithAudio”.
5. ALARMRECQUALITY
TherearefourqualitysettingsduringanAlarm:BEST, HIGH,NORMALandBASIC.
6. MOTION TRIGGERRECORDING
When yousetuptheMOTION DETECTION function(Pleaserefer toPage.15forMOTION DETECTION SETUP),
1. Select “ON”tosetup themotiontrigger recording: It canautomaticallyswitchfromstand-by modetoRecordingMode.
Themotiondetectionwill changethescanningsequenceandshows and “D”on themonitor.
NOTE: The triggerrecording timewill depend on ALARMDURATIONmode setting (Pleaserefertopage.10 forALARMDURATION)and it will
recordfromthe last triggertime. Forexample, when the alarm durationsetting is1min, the timerecording timeisfrom9:00:00 to9:01:00.
Ifthe motion detection trigged againat 9:00:40, thetrigged recording timewillfrom9:00:00 to9:00:40 and 9:00:40 to9:01:40. Thetotal
recording timeis00:01:40.
2. Select ”OFF”:Thescreenshows, the motion detectionwill change the scanningsequencewhileinrecording mode and shows
“M”on themonitor.
3. (Brightness)/ (Contrast) /(Color)
Haveavideoadjustment (Brightness /Contrast/ Color) ofeachchannel. Thelevelisfrom0to9.
4. ALARM
SelectLOW/ OFF / HIGH foralarmpolarity.ThedefaultvalueisLOW.
5. RECORD
Setupwhichchannelyouwant torecordduringalarmtrigger.TheDMRrecordmethodsareasbelow:
EVENT :whenalarminput istriggered, DMRwill recordalarming channel morefrequently.
Forexample: whenCH01istriggered,therecordingmethodwill become1-2-1-3-1-4….
NORMAL : whenalarminput istriggered, DMRwill recordnormallyassetup.
OFF : whenalarminput istriggered, DMRwill not record.
(RECORD)
HDD OVERWRITE: NO
RECORD IPS:25A
RECORD QUALITY: NORMAL
ALARMRECIPS:25A
ALARMRECQUALITY: HIGH
MOTIONTRIGGERRECORD: ON
CAMERA
1. TITLE
Assignasix-characterstitletoeachcamerainput. Initiallyeachtitleisthe
camera’smax number.
2. DWELL
Select “ON”tosetupthechannelautoswitchingonthecall monitor.
(MENU)
SEARCH
TIMER
►RECORD
CAMERA
SYSTEM
EVENT
NETWORK
(MENU)
SEARCH
TIMER
RECORD
►CAMERA
SYSTEM
EVENT
NETWORK

NETWORK
(MENU)
SEARCH
TIMER
RECORD
CAMERA
SYSTEM
EVENT
►NETWORK
Pressthe “▲”“▼””◄”“ ”buttonstomovethecursor.
Pressthe +” -”buttonstochangethedigit.
Pressthe MENU”buttontoconfirmthechanges/ toexitthemenu.
SetIPADDRESS,GATEWAY, NETMASK, DNSandPORT.
ChooseYESinRESET DEFAULTwill gobacktodefault valueofNETWORK.
14
(NETWORK)
SERVER IP
GATEWAY
NETMASK
DNS
WEBPORT
RESETDEFAULTNO
192.168.001.010
192.168.001.065
255.255.255.000
168.095.001.001
00080

MOTIONDETECTIONSETUP
1.Press “MENU “toenterthemenusetup,then “Down ”toCAMERAsetup.
2.Press ENTER”twice toentertheMotionDetectionSetup.
3.Eachscreendisplaysthecurrent camerapictureoverlaidwiththemotiontargets(asFigure1).
Youcanpushthebutton Left ”or “Right ”, ”Up ”or “Down ”toadjust motiondetectioninON or OFF.
4.Thetargetsoneach motionsetupcanbeturnedtoON orOFF individually. Tosetuptargets, usingthe
frontpanelbuttons:
àPress “ENTER”toconfirmthechannel
àPress “ENTER”toenter motionmode
▲Up--moves thetargetcursoruponerowatatime.
▼Down--movesthetargetcursordownonerowatatime.
◄Left --movesthetarget cursor leftonecolumnatatime.
►Right --moves thetarget cursorrightonecolumnatatime.
àPress “ENTER”toturnthetarget cursorON andpress “ENTER”againtoturnthetarget cursor OFF.(Figure1-1)
Zoom –turnsall targetsinthecurrentrowON or OFF. (Figure1-2)
PIP –turns all targetsonthescreenON or OFF.(Figure1-3)
5.Press “SLOW “buttontosetuptheSensitivitylistupto255and “REC “buttontosetuptheSensitivitylistdownto000.
Thedefaultvalueisseton32.
NOTE : Sensitivityvalueisrelatedtomotionandbrightnesschange. Lowvalue(as001)meanshighersensitivity
on motion andbrightnesschange.Highvalue(as255) meanslowersensitivityonmotionand brightness
change. Usercan choosethe suitablesensitivityvalueindifferentlocations.
NOTE : Whenmotion trigger recordingsettingisON, it canautomaticallyswitch fromstand-by modetorecordmode.The
motiondetectionwill changethescanningsequenceand showsonthemonitor. Therewill beanactionas
following:
Forexample:IfthemotionisdetectedonCamera#1, itsrecording&scanningsequencewill bemorefrequent. The
sequencewill beas 1st,2nd,1st, 3rd,1st, …16th.Andchannel1will showonthescreen.If2ndcameraand3rdcamera
bothmotiondetectionareactivated,theywill bescanningas1st, 2nd,3rd,2nd,2nd,3rd,3rd,2nd,3rd,4th,2nd, 3rd …and
vice versa. AndCH2&CH3will showforaperiodoftimewhichissameasAlarmDuration time.
15
MOTION DETECTION

16
Figure1MOTIONDETECTIONSETUP
1
2 3 4 5 6 7 8 9 10 11 12 13 14 15
--
-- -- -- -- -- -- -- -- -- -- -- -- -- --
032
1
2 3 4 5 6 7 8 9 10 11 12 13 14 15
--
-- -- -- -- -- -- -- -- -- -- -- -- -- --
Figure1-1MOTIONDETECTIONSETUP —1~15
032
12 3 4 5 6 7 8 9 10 11 12 13 14 15
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Figure1-2MOTIONDETECTIONSETUP--LINE
032
Figure1-3MOTIONDETECTIONSETUP--ALL
12 3 4 5 6 7 8 9 10 11 12 13 14 15
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
032
EVENT
Thereareonly16recordedeventswill beshownonasinglepageand please press “◄”or “►”tochangethe
pagesorpress ▲+ ▼toCLEARtheEVENTrecord.
(MENU)
SEARCH
TIMER
RECORD
CAMERA
SYSTEM
►EVENT
NETWORK
MHDD WARNING2002-JAN-01 03:00:00
MHDD LOSS 2002-JAN-01 03:00:00
MHDD ERROR 2002-JAN-01 03:00:00
SHDD WARNING2002-JAN-01 03:00:00
HDD FULL 2002-JAN-01 03:00:00
SYSTEMERROR 2002-JAN-01 03:00:00
----02 VLOSS2002-JAN-01 03:00:00
----03 ALARM2002-JAN-01 03:00:00
◄: PAGEUP ►:PAGEDOWN ▲+▼: CLEAR
M-HDD WARNING: Master HDD might befailed.
M-HDD LOSS: Master HDD doesnot exist.NowusercanusetheotherHDD.
M-HDD ERROR: Master HDD mightbe error
S-HDD WARNING: SlaveHDD mightbefailed
S-HDD LOSS:SlaveHDD does notexist. NowusercanusetheotherHDD.
S-HDD ERROR: SlaveHDD mightbeerror
HDD FULL: HDD isfull
SYSTEMERROR: Systemmightbefailed
----02VLOSS: Channel: 2Videoloss
----03ALARM: Channel:3ExternalI/OAlarmhavetriggered
POWERRESTORE: Power restore