mbt Lighting DMX6 User manual

DMX6 user manual
6CH DMX Controller
Introduction
The DMX controller has 6 channels and 7 sliders. only one slider is set as the master and the left sliders are
slaves. the master slider controls 6 channels’s DMX output and 6 slave sliders control each channel’s DMX
output respectively. DMX value is from 0~255. Before your application, please read instructions carefully and
thoroughly.
Technical specification
power source-------------------------------------------DC 9V 100mA ADAPTER 6F22 BATTERY
DMX output--------------------------------------------3PIN XLR female socket
Dimension----------------------------------------------173x153x55mm
Panel layout
1
6
7
8 7 6 5 4 3 2

1. power indicator
2. master slider
3. slave slider (control channel 6)
4. slave slider( control channel 5)
5. slave slider (control channel 4)
6. slaveslider (control channel 3)
7. slave slider(control channel 2)
8. slave slider(control channel1)
Operational instruction
After connecting power source,switch on.the power indicator is on.
Adjust DMX value by sliders.
importants!
Forbid using it in rainy,moist places in case of electronic short.
Use ordinary 6F22 battery which can sustain 5 hours.
DMX socket polarity: 1---Ground 2---Data- 3---Data+
DMX output address range:0~5
Address 0=channel1
Address1 =channel 2 and by analogy,address5=channel5