Vehicle Restraint
iDock™Controls
GENERAL DESCRIPTION:iDock Controls are technologically
advanced push-button controllers and light communication used with
various McGuire loading dock equipment. iDock Controls are standard
with all automatic McGuire vehicle restraints, used with or without dock
levelers.
CONSTRUCTION: iDock Controls are made with UL 4X Nonmetallic
enclosures. The controls feature a modular design to reduce maintenance
costs. 3-in-1 light assembly on the controller shows the state of the station
and whether it is safe to enter the trailer. LCD display shows status of
controls and explains fault conditions. Metal dome buttons provide positive
feedback to the controls.
MESSAGE DISPLAY: iDock Controls feature an LCD interactive
message display for equipment information, system information,
maintenance history, counters and settings. The operator presses the
Menu button, then up and down arrows to navigate through the menu.
Press Enter to advance one screen, or Menu to go back. The Message
Display will also provide notices of faults, or instructions for Bypass mode
or a sequence of operation.
OPERATION: iDock Controls can be used to operate light communication,
vehicle restraint, dock leveler, overhead door, and/or light accessories.
The operator presses the appropriate dome button to operate each
component. Depending on the options selected, a sequence of operation
can be applied to only allow operation of each component in a specific
order. If operation is attempted out of sequence, the controller’s Message
Display will indicate the correct button to press next.
Using the controller Menu, the operator can place the dock equipment in
Bypass mode if necessary, where the exterior light is red and an interior
amber caution light accompanies a green light indicating to the dock
attendant to proceed with caution.
EXTERIOR LIGHTS: Low profile, traffic style, red and green LED lights
opposite of interior lights are standard for communication to the truck
driver. A set of caution signs warns the truck driver to “Back In or Pull Out
On Green Light Only”.
WARRANTY: iDock Controls feature a full one (1) year base warranty
on all structural, mechanical and electrical parts, including freight and labor
charges in accordance with Systems, LLC’s Standard Warranty Policy.
Systems, LLC warrants all components to be free of defects in materials
and workmanship, under normal use, during the warranty period. This
base warranty period begins upon the completion of installation or the
sixtieth (60th) day after shipment, whichever is earlier.
SS iDock 10/2019
Advanced Controls of Loading Dock Equipment
Interactive Message Display with System
Information
View Equipment Usage and Maintenance History
Raised Dome Button Design for Ease of Use
Fault Code Troubleshooting Display and Internal
LED Lights
Optional Integrated Controls of all McGuire Dock
Equipment and Dock Door Installed
3-Color Light Communication System
LED Interior and Exterior Lights
UL 4X Nonmetallic Enclosure
Made in the USA
