MDB Family 0710 Installation and operating instructions

Revised 25NOV2011
page 1
Congratulations on purchasing a MDB Family product. This product will provide many years of service if
you adhere to the following guidelines for assembly, maintenance and operation. This product is for
residential use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assem-
bling the bed in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers.
All of our products are made from natural woods. Please understand that natural woods have color
variations which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARD-
WARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC
VARIATIONS.
Toddler bed (0710) - Assembly and Operation Manual
Unpack and separate all parts, bolts, screws and clip angles. All holes for attachment have been pre-drilled.
No drilling by the customer is necessary. Ask your store or call us for replacement of missing parts.
On the last page, record your model/item number, P.O. / lot number, date of purchase, store purchased
from and the finish color for future reference.
Please read the Caution and Warning Statements
insert before using your product.

page 2
PARTS
A. Top and Bottom Bar (4)
B. Center Bar (4)
HARDWARE
J. Side Panel (2)
H1. 3” Phillips Head Bolt (8) H2. 2 -1/2” Phillips Head Bolt with Nut (12)
H5. Wood
Dowel (32)
H3. 1 -3/4” Phillips Head Bolt
with Nut (4)
H4. 3/4” Wood
Screw (6)
H6. Bracket (2)
F. Center Slat
H. Right side rail
G. Left side rail
E. Slat (12)
READ ALL INSTRUCTIONS
BEFORE ASSEMBLING
THE PRODUCT.
D-1. Left
Footboard
Post
C-2. Right
Headboard
Post
C-1. Left
Headboard
Post
D-2. Right
Footboard
Post
Tools Needed
(not included)
Phillips
screwdriver

page 3
STEP 1. Set up headboard and footboard.
STEP 2. Set up bottom board.
J. Side Panel
J. Side Panel
H3H3
H3H3
F. Center Slat
E. Slat
H3H3
DO NOT OVERTIGHTEN.
E. Slat
H1
H1
H1
H1
H5 H5
A. Top and Bottom Bar
B. Center Bar
B. Center Bar
A. Top and Bottom Bar
H1
H1
H1
H1
H5 H5
A. Top and Bottom Bar
B. Center Bar
B. Center Bar
A. Top and Bottom Bar
C-2. Right
Headboard
Post
C-1. Left
Headboard
Post
D-1. Left
Footboard
Post
D-2. Right
Footboard
Post

page 4
STEP 4. Attach
side rails to headboard and side panels.
KEEP THIS MANUAL IN A SAFE
PLACE FOR FUTURE REFERENCE.
*Check to make
sure that all of the
bolts are fastened
securely.
H2
H2
H6. Bracket
H6. Bracket
H4
H4
H2
H2
H2
H2
The mattress intended for use on the bed shall be a full-size crib mattress having
minimum dimensions of 51-5/8 in. (1310mm) in length, 27-1/4 in. (690mm) in width
and 4 in. (100mm) in thickness, or a greater thickness not exceeding 6 in (152mm).
STEP 3. Attach
bottom board to headboard and footboard.
H2
H2
H2
H2
H2
H2
DO NOT
OVERTIGHTEN.
C-2
C-1D-1
D-2

Pine woods exchange moisture with the air adjusting to
major changes in room temperature and humidity. Therefore,
it is best to place your furniture away from heating or
air-conditioning vents.
Sunlight is not friendly to solid wood furniture and prolonged
direct exposure to harsh sunlight can discolor the finish. Be
careful not to place your furniture in direct sunlight for
extended periods of time. As with all your fine furniture, blot up
spills immediately.
ONE YEAR LIMITED WARRANTY:
We will replace any missing parts at the time of
purchase or any defective item within a one year
period from the date of original purchase.
Please keep your receipt so that we may
process your warranty request. This warranty
only covers new units with original packaging
and ownership, and is not transferable. It does
not cover any used, secondhand or demo
models.
This warranty does not cover any damaged or
defective parts that result from installation and
assembly, normal wear and tear, abuse, negli-
gence, improper use or alteration to the finish,
design, and hardware of the crib. The specific
legal rights of this warranty may vary from state
to state. Some states do not allow any exclusion
or limitation of incidental damages. Some States
do not allow limitation on how long an implied
warranty lasts.
Failure to follow these warnings and
the assembly instructions could
result in serious injury or death from
entrapment or strangulation.
Registering your product is even easier than
before. You can register your product on our
website at : www.themdbfamily.com
IF YOU WOULD LIKE TO ORDER
REPLACEMENT OR MISSING PARTS
PLEASE VISIT US AT:
WWW.THEMDBFAMILY.COM
OR YOU CAN CONTACT US BY MAIL:
MDB FAMILY
855 WASHINGTON BLVD.
MONTEBELLO, CA 90640
HOTLINE: [phone]
!
WARNING :
!
WARNING :
ENTRAPMENT/
STRANGULATION HAZARD
Infants have died in toddler beds from entrapment and
strangulation.
Failure to follow these warnings and the assembly
instructions could result in serious injury or death.
NEVER use bed with children under 15 months.
NEVER place bed near windows where cords from blinds
or drapes may strangle a child.
If guard rails are used as the mattress containment means,
guard rails provided must be used to avoid the formation of a
gap between the mattress and the bed that could cause an
entrapment.
DO NOT place bed near windows where cords from blinds
or drapes may strangle a child.
DO NOT place items with a string, cord, or ribbon, around
a child’s neck, such as a hood strings or pacifier cords.
DO NOT suspend strings over a toddler bed for any reason.
revised30AUG2011
Storage:
•
•
Care and Cleaning:
Do not scratch or chip the finish. Do not use abrasive chemi-
cals for cleaning. Clean with mild soap on a soft rag. Rinse and
dry thoroughly. If you ever refinish this furniture, be sure to use
only a non-toxic finish specified for children’s products. If you
choose to refinish this furniture, the warranty will be voided.
The intended user’s minimum age must be at
least 15 months old and maximum weight must not exceed 50 lbs (22.7 kg).
•
* Refer to cardboard box.