MDF EDEN ED01 User manual

Product Size:
ED01 - EDEN DINING TABLE
Assembly Instructions
(Line Drawing of Item)
Page 1 of 6
H76cm x W175cm x D90cm
Please retain for future reference
Made in India

Missing Parts or Issues
If you have any problems, please don’t hesitate to get in
touch with your retailer directly.
Time to Assemble
2 persons are required to assemble this item.
Number of People Required to Assemble
> Absorption can cause wood to warp or finishes to de-
laminate.
ED01 - EDEN DINING TABLE
Assembly Instructions
> The packaging should be used to protect the product
during assembly.
> Periodically check all fittings and re-tighten as necessary.
Do
> When you are ready to start, make sure that you have
the right tools and plenty of space.
> Ensure that this product is only used on firm, level
ground.
> Do not place hot items (e.g. hot drinks) directly on to the
surface. Make sure you always use a placemat or coaster.
Don't
> Do not drag or pull your furniture.
> Spend a short time reading through this leaflet before
you start.
> Do not use silicone based furniture polish. Silicone in
furniture polishes can break down the finish.
Approximately 20 minutes required to assemble this item.
Page 2 of 6
Before You Start
Warnings
> Keep fittings out of children’s reach and keep children
well away from the assembly area.
> Never allow any kind of liquid to remain on your
furniture.
> Ensure the product is fully assembled as shown, and that
all fixings are fully tightened before use.
> Wood will mellow and change colour over time, we
recommend that ornaments and items placed on the
surface are moved regularly for the first few months to
prevent uneven mellowing.
> Avoid exposing the furniture to excessive heat or direct
sunlight, as this can cause deterioration of the colour.
> Carefully check that you have all parts before beginning
assembly.
> tThe furniture should be assembled in the room that it is
intended to be used in.
Please retain these instructions for future reference.
Tools required
> Wipe occasionally with a soft cloth slightly dampened
with water, then buff with a dry clean soft cloth.
> Unwrap all packaging materials and place components on
a clean surface to protect them from damage.
> Do not sit or stand on your furniture.
(?)

Page 3 of 6
Getting to Know your Product
Components supplied. Please use this guide if you require replacement parts.
Qty
Visual
Other Fixtures and Fittings Supplied (Not To Scale)
Ref
Dimensions
3
4MM
Qty
1
20
10
mm
40
ED01 - EDEN DINING TABLE
Assembly Instructions
Dimensions
H3cm X W175cm X D90cm
M8x16
16
Fixtures and Fittings
Ref
Dimensions
Main Fixtures and Fittings Supplied (To Scale)
16
M6x20
1
2
30
100
90
80
70
60
50
H6cm X W73.5cm X D71cm
2pcs
B
#
A
Ctn
Qty
Visual
1pc

ED01 - EDEN DINING TABLE
Assembly Instructions
Page 4 of 6
1
2
100%

ED01 - EDEN DINING TABLE
Assembly Instructions
Page 5 of 6
3

5
General care
· Assemble the product in the room intended for use.
· Always lift your furniture to move it, never drag or push it as this can cause damage.
· Regularly check all fixings and tighten if necessary.
· Wipe with a soft, slightly damp, lint free cloth. Buff with a dry, clean cloth.
· Wipe up spills immediately, never leave liquids sitting on the surface as this can damage the finish.
· Always use matts and coasters to protect the surface when in use.
· Never place hot items directly onto the surface.
· Do not use silicon-based furniture polish as the silicon can affect the finish.
ED01 - EDEN DINING TABLE
Care Guide
Made of Mango wood
Mango wood is natural materials, across each piece you will be able to see and
appreciate the unique markings and colours.
These natural features enhance the beauty and individuality of your furniture, they should not
be considered as imperfections.
As a natural material wood will continue to move and be affected by its surroundings.
Changes in humidity and temperature can lead to warping and/or cracks in the wood.
Therefore, it is advisable not to place your furniture against a direct heat source or air
conditioning unit.
Over time, with changes in the atmosphere and light, the wood will mellow.
To ensure an even tone we recommend that it is not left in direct sunlight and any objects
placed on the furniture should be regularly moved around to help avoid colour differences.
Page 6 of 6