MediaRange MR733 User manual

PORTABLE BLUETOOTH® SPEAKER
FM Radio
Bluetooth®
GB User manual, Operating- and safety
instructions, Warranty conditions
Item no.: MR733

Resume or stop streaming music with the „Play I Pause“ button; Bluetooth
mode: Answer and hang up phone calls by using the „Play I Pause“ button;
FM-mode: Start and stop the automatic FM tuner channel search with the
„Play I Pause“ button.
GB Getting started and operation
Select the requested playback mode by using this button:
1. Bluetooth mode; 2. Music playback via memory card; 3. FM tuner
Switch to the next or previous title with the „Back“ and „Forward“ buttons.
Keep the „Back“-button pushed to lower the volume. Keep the „Foward“
button pushed to raise the volume. Use the buttons in the FM-mode to
select and adjust manually the frequency of the radio station.
Playback mode
Play I Pause
Answer and hang up phone calls
automatic FM tuner channel search
Next title
Raise volume
FM channel search
Previous title
Lower volume
FM channel search

GB Getting started and operation
built-in
microphone Slot for memory cards
Micro USB port and
FM antenna output;
LED charging indicator
Built-in microphone for hands-free function
Memory card slot. The device is supporting micro SD, micro SDHC and micro
SDXC memory cards. Insert a memory card, with the contacts up, into the
slot. The card will be latched inside the slot and you will hear a „click“.
Micro USB port for charging the device; FM antenna output: Use the micro
USB cable as antenna while using the FM tuner mode
On and off switch. Slide the switch to the right to turn on the speaker. Slide
the switch to the left again to turn off the device.
On / Off switch

MR733
1
1. Turn on the speaker. It starts in the Bluetooth mode and searches immediately
previous Bluetooth settings. If there is no connection, it searches for new
Bluetooth devices.
2. Turn on your device and be sure Bluetooth is activated to pair it with the speaker.
The speakers Bluetooth name is „MR733“. As soon as your device has been
connected successfully, you are able to stream your music. You can use your
connected device or the navigation pannel on the speaker for music control.
Note: Each device need to be paired once with the speaker. The speaker is searching immediately
previous Bluetooth settings in future and devices will be paired automatically.
GB Playback mode I Bluetooth
2

1
1. Turn on the speaker and insert a micro SD, micro SDHC or micro SDXC memory
card, with the contacts up, into the memory card slot. The slot will latch the card
and you will hear a „click“ if it is inserted correctly.
2. The memory card will be detected automatically and the speaker starts to
playback your music. Use the navigation pannel for music control. Push the
memory card carefully to remove the card from the slot again.
Note: If the speaker will be turned off or if you switch the playback mode, the speaker will
memory the last played title and starts to playback this title if you turn on the speaker next time.
GB Playback mode I Memory card slot
2