Medic Therapeutics MT-PAINLASER-001 User manual

HANDHELD PAIN MANAGEMENT
LASER THERAPY
WITH PROTECTIVE GLASSES
User Manual
MT-PAINLASER-001

Please read this manual prior to use.
ABOUT:
Laser therapy delivers non-thermal photons of light to injured
cells; the cells are stimulated and develop a higher rate of
metabolism. This results in pain relief, improved circulation
and anti-inflammation, accelerating the healing process.
CAUTIONS:
1. Avoid looking directly at the light.
2. Keep out of reach of children to prevent injuries to their
eyes.
3. Do not use if you have a pacemaker, as the laser can
interfere with the performance of the pacemaker.
4. While using the device, overall wellness and exercise will
help support and enhance your metabolism.
5. When using the device, please keep light emitting ports
clean. Otherwise, the loss of light during treatment time
will increase, decreasing the effectiveness of the therapy.
6. Symptoms like: thirst, dry eyes, dizziness or increased pulse
rate are normal following use.
7. If the device is not used over a long period of time, make
sure to charge the device every 4-6 months to preserve
and maintain the battery.

PRODUCT SPECIFICATIONS:
Laser medium GaAIAs Semiconductor
Laser wavelength 650nm±20nm/808nm±20nm
Number of laser diodes 808nm laser diode X1 pc
650nm laser diodes X12 pcs
Maximum output power per
808nm laser diode
150mW±20%
Maximum output power per
650nm laser diode
5mW±20%
Time seng 5-30 minutes
5 minutes as an interval
Baery voltage DC 3.7V
Baery capacity 2600 mAh
Input power <10VA
Environmental temperature 5°C~40°C
Relave humidity <80%
Atmospheric pressure 860hpa~1060hpa
Voltage 100-240V

PARTS OVERVIEW:
Host
Power adaptor
LED Screen
Us plug
USB cable
On/O
Time

PARTS OVERVIEW:
LED Screen
Time
Baery
Power charger jack
808 laser diodes
650nm laser diodes
One 808 laser diodes
Twelve 650nm laser diodes

OPERATING INSTRUCTIONS:
1. FUNCTION SETTING AND KEY OPERATIONS
1.1 Turn on
1 Press and hold “ “ (Figure 1).
2 As the device turns on, the buzzer will make a “tick” sound.
3 All the icons on the LED screen will light up briefly when
turned on, then the default settings will be displayed on the
screen (default settings: 05 minutes as shown in Figure 2).
1.2 Time Setting
1 Press “Time” to adjust the treatment time. Time increases
in increment of 5 minutes; treatment time is adjustable
from 5 to 30 minutes ( Figure 3 ).
2 When “Time” is pressed, the buzzer will make a “tick”
sound, and the time icon on the LED screen will change.
Figure 1 Figure 2

1.3 Treatment Start and Pause
1. After setting the time, short press “Power“ to initiate the
treatment.
2 After the treatment has been completed, the buzzer will
“tick” , the laser will stop and the LED screen will return to
the settings status.
3 To pause during treatment, short press “Power”. The buzzer
will “tick” and the time display will pause.
Notes:
Time cannot be adjusted during treatment process.
Use the included protective glasses during treatment to avoid
impairing your eyes.
1.4 Shutdown
Press and hold “ “ to turn the device off. The buzzer will “tick”.
(Figure 4).
Note:
The device has an automatic shutdown function to save
energy; the device will automatically turn off after 2 minutes
if not in use.
Figure 3

2. Treatment Recommendation
Hover the handheld laser over the desired treatment area at
a distance of 0.42in – 0.78in away from your skin. Do not
perform the treatment over clothing or any creams/ointments/
dressings. Feeling a warm sensation during use is normal.
Recommended use is once or twice a day for 20 minutes at a
time. 10-15 days is considered one full treatment course.
Take 5-7 day intervals between treatment courses.
3. Charging Instruction
1 Charge when the icon appears on the LED screen to
preserve the battery life of the device.
2 Insert end A of the power adaptor to a household socket
(110V-220V) and insert end B of the power adaptor to the
device for charging (Figure 5). The buzzer will “ tick” twice
and the battery icon on the LED screen will show that the
device is charging. When the device is fully charged, the
battery icon displays:
Figure 4
Figure 5
Power adapter
USB cable

Note:
1. The charging time should last 10 hours for the first 3 uses.
2. Only use the included power adaptor to avoid damaging
the device.
IMPORTANT SIGNS AND SYMBOLS:
According to regulation in EN60825-1 : 2014 standard, each 3B
laser product must be accompanied by a radiation warning sign
and a radiation declarative sign.
Radia on warning sign
No li ering
CE Mark
Keep dry
Fragile
Keep away
from sunlight
UP
Radia on declara ve sign
Other Signs & Symbols

PRODUCT SPECIFICATIONS:
Laser medium Causes Solutions
Device does not
turn on.
1. Insufficient
time of pressing
“ ”
2. Battery is low.
1. Press & hold
” “ for over
3 seconds.
2. Plug in “power
adapter ° to
charge.
Laser light not
working.
“ ” is not
pressed quickly
enough.
1. Short
press “ ”.
Weak or no laser
output.
Damaged laser. Return the device
to the factory
for replacing or
repairing.
MAINTENANCE AND PRESERVATION:
1 If the device malfunctions, check the “Trouble-shooting
Instructions”. If the problems aren’t listed, contact the
authorized service provider. Don’t disassemble or repair by
yourself or risk voiding the warranty.
2 Dampen a cotton bud with a gentle neutral cleaner to clean
the dirty surface of the device. Don’t use organic solvents,
gas etc. to clean.
3 Dampen a cotton bud with alcohol to gently clean the light
emitting ports or lasers. Never soak or scrape to clean.
4 Keep the device away from humidity, high temperatures
and direct exposure to sunlight to extend the life of device.

5 Do not place device against hard objects to avoid scratches
or damage to the lasers.
6 If the device is not used for a long time, please charge it at
least every 4 to 6 months, which is beneficial for battery
maintenance. If the battery isn’t operating properly, it
should be returned to the manufacturer for re-activation or
replacement.
TRANSPORTATION AND STORAGE:
Avoid exposure to strong shocks, vibration, snow and rain.
Always store in a dry, well-ventilated room, free from corrosive
gas.
PRODUCT LIST:
1. Host 1 unit
2. Power adapter plug 1 pc
3. USB cable 1 pc
4. Manual 1 pc
5. Protective glasses 1 pc
6. Carrying pouch 1 pc

LIMITED LIFETIME WARRANTY
Your Medic Therapeutics Handheld Pain Management Laser
Therapy Device is backed by a limited lifetime manufacturer’s
warranty. Medic Therapeutics will repair or replace your
device at any time should it fail due to a defect in material or
workmanship, subject to the certain limitations.
This limited warranty does not cover any damage that
results from unauthorized or improper use, service, or repair.
Further, it does not cover damage caused by accident, impact,
negligence, or normal wear and tear. Should you discover your
Medic Therapeutics Handheld Pain Management Laser Therapy
Device is not functioning properly, please send your device
to our repair center for evaluation. If your product cannot be
repaired or serviced, we will reserve the right to change it for a
similar or newer model.
Please note that a flat rate of $35.00 will be charged to cover
a service evaluation fee and return shipping of your device. All
warranty claims must be accompanied by a copy of your proof
of purchase from an authorized retailer. Please send your
device, proof of purchase, and a check or money order in the
amount of $35.00 made out to Medic Therapeutics to:
Address:
Medic Therapeutics Service Center
3069 Taft Street
Hollywood, FL 33021
Contact:
[email protected]om