Medion MD 85722 User manual

1
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
Hands-free Kit
What your 1 year warranty means
Great care has gone into manufacturing this product and it should therefore provide you with years
of good service when used correctly. In the event of product failure within its intended use over the
course of the first year after the date of purchase, we will rectify the problem as quickly as possible
once it has been brought to our attention. In the unlikely event of such an occurrence, or if you
require any information about the product please contact us via our after sales support services,
details of which can be found in this manual and on the product itself.

2
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
Copyright © 2008
All rights reserved.
Medion® makes no warranty of any kind with regard to this material, including, but
not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Medion® shall not be liable for errors contained herein or for incidental or consequential damages in connection with the
furnishing, performance, or use of this material.
Medion® assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Medion®.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document
may be photocopied, reproduced, or translated to another language without the prior written consent of Medion®.
The information in this document is subject to change without notice.

3
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
Foreword
These operating instructions help you to use
the MD 85722 hands-free device (referred to as
"device") as intended, safely and for your
benefit.
These operating instructions are for anyone
who
•uses,
•cleans or
•disposes of this device.
Each of those persons should have read, noted
and understood the total content of these
operating instructions.
These operating instructions constitute part of
the product. Always keep these operating
instructions close to the device. Include the
operating instructions with the device if you sell
it or pass it on in any way.
Pre-requirements for using the
functions provided
•mobile phone with Bluetooth – Bluetooth
Standard 1.0 or higher
•mobile phone with voice-enabled dialling.

4
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
Notes on this Manual
Various parts of the operating instructions have
fixed organisational features. These parts are
made up of:
Lists ( y)
Steps ()
Text shown in the display (“display”)
LThese instructions contain additional
information, such as special hints for
using the device economically.

5
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
Contents
Hands-free device ...................................1
What your 1 year warranty means ........... 1
Foreword..................................................3
Pre-requirements
for using the functions provided.............. 3
Organisational featuresFehler! Textmarke
nicht definiert.
Contents................................................... 5
Safety instructions .................................. 7
Proper use ........................................................ 7
Basic safety information ..............................8
Avoiding risk of accident.........................8
Avoid risk of explosion............................. 8
Avoid risk of suffocation.......................... 8
Risk of fire ..................................................... 8
Avoiding electric shock............................9
Avoiding material damage ..................10
Avoiding environmental damage ..... 10
Organisational
features of the safety instructions.....11
Device Description................................ 12
Scope of supply............................................ 12
Equipment and functions......................... 13
General view of device .............................. 14
Charging.........................................................16
Charging the
device in a 230V socket.........................16
Charging the device in-car................... 17
Attaching the device to the sun visor... 20
Choosing the display alignment ............ 21
Operating the device ............................ 21
Switching on/off ..........................................22

6
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
Adjusting the volume.................................22
Accepting calls..............................................22
Rejecting calls ...............................................22
Switching to "mute"....................................23
Ending calls....................................................23
Accepting a second call.............................23
Dialling a number via voice dialling ......24
Selecting a number from the memory .25
Call forwarding .............................................25
Disconnecting the
mobile phone and the device..................26
Settings ..................................................27
Troubleshooting....................................32
Repairs....................................................36
Cleaning .................................................36
Recycling and Disposal .........................37
Technical Data .......................................38

7
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
Safety instructions
Read through the safety instructions
carefully before you start using the device.
Take note of all warnings and follow all
instructions on the device and in these
operating instructions.
Proper use
You can use this device with a mobile phone to
talk hands-free on a wireless basis.
The device can also be used as an additional
display and remote control for your mobile.
The device is to be used for this purpose only. It
must only be used as described in these
operating instructions.
Any use other than that covered by the
statutory regulations is considered improper
use and can result in personal and material
damage.
Any other use or modification of the device is
considered improper use and can result in
material damage.
The manufacturer is not liable for damage
caused by improper use or incorrect operation.
The device is not intended for commercial use.

8
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
Basic safety information
Avoiding risk of accident
Observe the statutory regulations, especially
when making telephone calls while driving a
vehicle.
•Use the hands-free function.
•Do not pick up the phone once the engine
is running and you are in traffic.
Installation of the device in the car should not
adversely affect the following:
•Driver safety, range of vision and freedom
of movement,
•Passenger safety (also in the event of an
accident),
•Vehicle safety devices, e.g. airbag, safety
belts and hazard lights switch.
Avoid risk of explosion
•You must not operate the device in an
environment where there is a risk of
explosion.
Avoid risk of suffocation
•Do not allow children to play with the
plastic packaging film.
Risk of fire
•Avoid additional heat, e.g. from direct
sunlight, heaters and other devices.

9
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
Avoiding electric shock
•Only use the device in dry environments.
•Make sure that no liquids can get into the
device at any time.
•Check the device and all components for
visible damage. You must only use the
device when it is in perfect condition.
•When charging the device at the mains, use
only a professionally installed socket
(240V~ 50Hz).
•The plug must be freely accessible so that
you can disconnect the device from the
mains quickly and easily in the event of
emergency.
•Remove the mains plug from the socket if a
fault occurs or if you are not charging the
device. Grasp only the plug to remove.
•Avoid exposing the power pack to drops of
water or spray. Do not place water-filled
objects water (e.g. vases) on, above or
adjacent to the power pack.
•Do not kink or pinch the mains cable.
•Do not touch the mains cable with wet
hands.
•If the mains cable is damaged, you must
replace the power pack with another one of
the same power rating before reusing the
power pack.
•The device is also intended for use with 12V.
Use only the 12V power supply (cigarette
lighter) to charge the device in the car.
•The charger cable must be freely accessible,
so that you can remove it quickly and easily
in an emergency.

10
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
•Remove the plug from the charge in the
event of faults. Grasp only the plug.
•Do not kink or pinch the charger cable.
•Do not touch the charger cable with wet
hands.
•If the charger cable is damaged, you must
exchange it for a similar one before using
again.
•Never allow children to use the device
unsupervised or to play with it. Store the
device out of reach of children.
•Allow only qualified specialists to perform
maintenance. Otherwise, you put yourself
and others at risk.
Avoiding material damage
•You must be able to reach the control
elements in the car after the device has
been installed.
Avoiding environmental damage
•Dispose of the device and its accessories in
accordance with statutory regulations.

11
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
Organisational features of the safety
instructions
These operating instructions contain the
following categories of safety instructions and
general instructions:
WARNING!
Instructions containing the word
“WARNING” draw attention to a
dangerous situation which can
possibly result in death or serious
injury.
ATTENTION!
Instructions containing the word “Attention”
warn of a situation which can result in material
or environmental damage.

12
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
Device Description
Scope of supply
12
3
4
1Hands-free device
2In-vehicle charger for operation on the 12V
power supply (cigarette lighter socket)
3Power pack (jack connector may vary)
4Metal clip for fitting to the sun visor

13
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
Equipment and functions
•DSP (Digital Signal Processor)
•Caller’s own number illuminated brightly on
dark display
•“Speak numbers” in five languages:
−English
−Spanish
−French
−German
−Italian
•Display adjustable between five languages
•Switching microphone to "mute”
•Voice dialling
•possibility of transferring calls to mobile
phone
•Battery charging display
•Battery charge-level display
•20-number memory
−memory for up to10 calls received
−memory for up to10 missed calls
•Detection of up to four mobile phones
•Up to eight hours calling time
•Up to 100 hours standby call time

14
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
General view of device
3
2
6
9
11
8 5
1
7
10
4

15
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
1LCD display
2Connect device and mobile phone
Disconnect device from mobile phone
During a call: switch to “mute”
3During a call: transfer a call
4Microphone
5“Accept call” button
6“Hand up” button
7Volume button
+ button: Increase volume
- button: reduce button
8Battery charging display
9Loudspeaker
10 On/Off button
11 Battery charger

16
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
Charging
DANGER!
Carelessness can lead to accidents!
Do not perform the following
actions when you are in traffic.
The device is charged via the car charging cable
in the car or with the power pack, also supplied,
which is plugged into a mains socket (240 V~ 50
Hz).
Charging the device in a 240V socket
•Insert the small power pack plug into the
device charger
•Insert the large mains plug in a 240 V
socket.
The charge indicator lights up red.
The charge indicator lights up green when the
device is fully charged.

17
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
Charging the device in-car
Insert the small plug from the car charger
cable into the device charger.
DANGER!
Starting the car can result in power
spikes in the 12V power supply.
Wait until the engine is running
before connecting the charger
cable to the 12V power supply.
Insert the large plug for the car charger
cable in the 12V power supply (cigarette
lighter).
The charge indicator lights up red.
The charge indicator lights up green when the
device is fully charged.
LTo save your car battery, do not charge
the device for long periods with the car
engine switched off.

18
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
Connecting the device with a mobile phone
(pairing)
DANGER!
Carelessness can lead to accidents!
Do not pair the devices while the
car is moving.
You will have to set up a Bluetooth connection
between the device and your mobile phone to
use the device for hands-free, wireless calls. This
is referred to as “pairing” the two devices.
If you have successfully completed pairing, the
mobile and the device automatically recognize
one another as soon as you start the search for
a Bluetooth device.
Please refer to the operating instructions for
your mobile phone on how to make a
Bluetooth connection to your mobile.
Start the search for a Bluetooth device from
your mobile, as described in the operating
instructions for the mobile.
To switch on the device, slide the POWER
button, located on the top of the device, to
the right.
The mobile phone searches for a Bluetooth
device.
When the search is finished, select “MD
85722” from the list on the mobile’s display.

19
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
To connect your mobile to the device, enter
the password "1234".
The device will recognize your mobile phone
after the password has been entered.
The word “Paired” will appear on your mobile
phone display.
If your mobile does not have a hands-free
function, the "headset profile" appears on the
display. In this case, accept the call using the
"hang-up" button.
The name of the paired mobile phone will also
be displayed.
LIf the connection attempt fails, start
again from the beginning. If the
connection attempt has been
successful, the device is ready for
operation.
The mobile phone will, in future, be recognised
by the device.
To do this, initiate the Bluetooth device
search function on your mobile phone.
Switch the device on.
Both devices will be connected automatically.

20
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
Attaching the device to the sun
visor
DANGER!
Carelessness can lead to accidents!
Do not fit the kit while the car is
moving.
You can attach the device to your car's sun visor
using the metal clip supplied.
Slide the metal clip onto the edge of your
car's sun visor.
Place the device in the centre of the metal
clip (1.).
The magnets on the rear hold the device firm
on the metal clip.
1.
2.
Rotate the microphone so that the person
you are talking to can hear you clearly (2.).
If necessary, select the display alignment.