
MEGATRON®
LED-Construction Light – HELFA DUO
TECHNICAL SPECIFICATION
Instruction manual
Series name MEGATRON® Pro HELFA DUO
Model number MT69054
Wattage 2 x 40W
HPF >0,9
Voltage 220-240V~
Frequency 50/60Hz
Luminous Flux 2 x 4.500 Lumen (System)/2 x 5.600 Lumen (Chip)
Color Temperature 5.000 K
Color Rendering Index CRI Ra 97
IP Rating IP54
Impact resistance rating IK08
Power cable 5m H07RN-F3 rubber cable with safety plug
Color Red/Black
Material Plastic (PC+ABS) + Aluminium
Excellently suitable for:
-Renovation work
-Construction sites
-Paintwork
Working light with a lot of lumens and high color rendering (Ra97)!
• Foldable construction light for optimal illumination of rooms and work areas.
• Super-bright, neutral white and evenly radiating light (2x 4.500 lumens).
• DUO light head with two LED units that can be individually aligned and switched on
(4.500 lumen each)!
• Power socket (IP54) for additional lights or for electrical appliances
(max. load 3.580W).
• Stable, height-adjustable stand made of metal.
• Set up and ready to use in seconds.
• Five meter long rubber cable H07RN-F3 with safety plug.
• The integrated cable winder also serves as a handle.
• Including practical protective bag for easy transport.
• Suitable for indoor and protected outdoor use.
• Instant restart possible.
• The operating temperature of the luminaire is -25�– +45�C.
INSTRUCTIONS FOR USE:
• Place the light on a stable and dry surface.
• Open the lower clamp lock to set up the base. Then lock the clamp lock again!
• Now open the upper clamp lock to adjust the height of the LED light. Then lock the clamp lock again!
• Insert the power plug into a suitable socket with protective contact. If you use the product outdoors, the power plug
may only be inserted into a corresponding IPX4 socket.
• Now switch on the construction light using the ON/OFF switches.
----
1,0m
© 01/2021
Replace any broken
Protective disk
CAUTIONS:
• Read the entire manual carefully before installation and operation.
• Switch OFF the power source before installation, replacement and cleaning!
• DO NOT disassemble the inner part of the luminaire. Doing so may result in luminaire damage or malfunction.
• Before replacement of the luminaire, turn it off and allow it to cool down.
• The minimum safety distance from the illuminated object is 1,0m.
• The manufacturer accepts no liability for any damage resulting from the misuse of the luminaire or when it is used
with inappropriate equipment.
• The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire
shall be replaced.
• Consult your dealer if you have any enquiries.
Lieferumfang:
Including Protective bag