Megger LCB2000/2 User manual

LCB2000/2 and LCB2500/2
Premium Loop & Circuit Breaker Testers
DESCRIPTION
The Megger®LCB2000/2, and LCB2500/2 series of Loop
and Circuit Breaker testers utilise advanced microprocessor
technology to provide a host of new features not normally
associated with standard testers.
The instruments utilise a large custom LCD display with a
power saving LED backlight. The display is mounted
behind a highly resilient polycarbonate window where it
provides outstanding clarity and viewing angle.
Both the LCB2000/2 and the LCB2500/2 are designed to
perform all the live system tests required for an electrical
installation meet in full the requirements of the 16th
Edition Wiring Regulations, (BS 7671). By providing a
range of both basic and advanced features, all of which
are simple to use, the LCB2000/2 and LCB2500/2 are
designed for maximum user convenience and time saving.
As an example the auto-sequence RCD test enables the
instrument to perform and record all the necessary tests on
an RCD in sequence whilst the user stays at the
distribution board to reset the trip.
In the event that the installed system has a fault or does
not test as expected a host of diagnostic features such as
ramp RCD tests are on hand to pinpoint the problem.
The LCB2500/2 provides the ultimate in technology
offering the ideal mix of features for the busy electrical
contractor combined with speed of operation, live display
of R1 + R2 values and efficiency provided by the
downloading of data. When combined with software
certification the system provides a highly professional
image for the contractor combined with the ever
increasing requirement for traceability of test results.
The LCB2500/2 offers comprehensive data storage options
with individual test results being quickly stored with
relevant connection details against user selectable
distribution board and circuit references. Data storage is
contained within non-volatile memory, (NVM), ensuring
that test results are not lost in the event of battery failure
or removal.
Once stored, results may be recalled to the display,
printed to an external serial printer or downloaded to
suitable software. Download Manager™ for Windows is
included enabling the simple download of stored data
from the instrument into files on a PC. These files can be
maintained as a record, used for manually completing
certificates or exported to other applications such as
spreadsheets and word processor documents. Instrument
setups and printer language may also be changed.
Where creation of certificates of test is required both
instruments are fully compatible with PowerSuite for
Windows, PowerSuite XPress and NICEone (for the
creation of N.I.C.E.I.C. Certification alone).
■Non-trip loop tests to 0.01 Ω
■PSCC + Contact Voltage
■Single + 3 phase loop tests
■Tests a wide variety of RCDs
■Ramp and auto sequence tests
■Phase rotation
■Waterproof and dustproof to IP54
■Storage and download (2500/2)
LCB2000/2 AND LCB2500/2
Premium Loop & Circuit Breaker Testers

APPLICATIONS
ELECTRICAL CONTRACTORS FEATURES AND
APPLICATIONS
The LCB2000/2 and LCB2500/2 are designed to provide
the electrical contractor with highly professional tools for
testing and commissioning fixed installations to both the
British and International Wiring Regulations. The
LCB2000/2 provides a comprehensive set of features to
cater for almost all Loop and RCD testing needs. The
LCB2500/2 adds to these the ability to store and print
results on site and to view R1 + R2 loop values during a
live test. The on-board storage facilities enable each test
result to be assigned to particular distribution board and
circuit references. Data may be later recalled to the
display for manual completion of certificates of test or for
maximum performance downloaded to certification
software such as PowerSuite for Windows, PowerSuite
XPress or NICEone to create a seamless recording system
with the traceability necessary for safety critical applications.
Some of the key features of the LCB2000/2 and LCB2500/2
are:
■Intelligent Power saving backlight
The inclusion of an intelligent backlight ensures
that the display can be clearly seen even where
the distribution board is located in a dark
cupboard but without ruining battery life.
■A choice of Non Tripping loop tests
A three wire 15 mA non tripping loop test
provides a fast response with 0,01 Ω. A two wire
15mA non-tripping loop test is also included and
provides 0.1 Ωresolution. Both tests guarantee
not to trip RCDs rated at 15 mA or more.
■No neutral needed for Line - Earth Testing
This useful feature enables tests to be performed
on lighting and three phase delta configurations
where no neutral is available.
■Automatic Test Start
When using probes to make the connections
both hands are needed making it almost
impossible to press the test button. The
LCB2000/2 and LCB2500/2 include a “Test start
on voltage detection” feature. Once armed the
instrument will wait until the probes are
connected or voltage is turned on then
automatically start a test .
■Three Phase Test Capability
Phase-Phase measurements (up to 440 V), Phase-
Neutral and Phase-Earth tests are all possible.
■A variety of Test leads Supplied as standard
LCB2000/2 and LCB2500/2 are supplied with a
pre-wired plug for making connections via the
standard socket outlets and a three wire leadset
with probes and clips. This enables connection
to be made easily to a wide variety of systems.
■Selectable RCD Types
The LCB2000/2 and LCB2500/2 may be easily set
to test General purpose, Selective or dc sensitive
RCDs.
■Tests Programmable RCDs
The Megger LCB2000/2 and LCB2500/2 cater for
programmable RCDs by allowing the test current
to be precisely defined up to 1000 mA. This
advanced feature enables the instruments to be
used in a wide range of specialist installations,
(e.g. medical), or where a programmable device
is encountered.
■Contact Voltage Indication
Megger LCB2000/2 and LCB2500/2 indicate the
Contact Voltage, (potential that bonded
metalwork would actually rise to in the event of
a fault) and the loop impedance during and RCD
test.
■Auto-Sequence RCD tests
RCD testing requires a number of tests to be
performed sequentially, many of which will trip
the RCD which then has to be reset each time.
In many cases the tester is some distance away
from the RCD requiring the operator to make
repeated journeys to reset the trip. LCB2500/2
includes an unique Auto-Sequence RCD enabling
the operator to remain with the RCD in order to
reset it whilst the instrument automatically cycles
through the necessary tests and records the
results ready for when the operator returns.
■ RCD Ramp Test - Indicates the actual tripping current
There are numerous situations when it is useful
to know the current at which a particular RCD
actually trips. For instance in cases of nuisance
tripping it is necessary to establish whether the
RCD is over sensitive. LCB2000/2 and LCB500/2
include a Ramp Test feature which automatically
increases the test current until the RCD trips. At
this point the actual tripping current is displayed.
■Phase Rotation Display
LCB2000/2 and LCB2500/2 include a special
phase rotation symbol within the LCD display.
When connected to a three phase supply the
symbol automatically indicates the phase
rotational sequence.
■Warranty
In addition to the electrical features above the
rugged design of the LCB2000/2 and LCB2500/2
range ensures that they can withstand the
everyday handling, transportation and storage
with other tools in the contractor’s toolbag. Both
products are supplied with a three year
manufacturer’s warranty.
LCB2000/2 AND LCB2500/2
Premium Loop & Circuit Breaker Testers

LCB2000/2 AND LCB2500/2
Premium Loop & Circuit Breaker Testers
SPECIFICATION
SUPPLY VOLTAGE
Instruments are designed to
work on supplies of 110 - 440
V, 50/60 Hz overvoltage
Category III with a maximum
voltage to Earth of 300 V
Supply Voltage
Measurement:
25 - 500 V
Intrinsic accuracy:
±2% ±2 digits
Supply Frequency
Measurement:
16 - 460 Hz
Intrinsic accuracy:
±0,1% ±1 digit
LINE-EARTH LOOP
RESISTANCE
MEASUREMENT
(to EN 61557-3)
Displayed Range:
0,01 Ωto 3,00 kΩ
Supply Range:
100 - 280 V
Nominal Supply:
230 V, 50 Hz
EN61557 Operating Range:
0,25 Ωto 3,00 kΩ
Intrinsic accuracy:
0,01 Ω- 9,99 Ω±4% ±0,03 Ω
10,0 Ω- 89,9 Ω±5% ±0,5 Ω
90 Ω- 899 Ω±5% ±5 Ω
900 Ω- 3,00 kΩ±5% ±20 Ω
LINE - LINE (Phase/Phase)
LOOP RESISTANCE
MEASUREMENT (to EN
61557-3)
Displayed Range:
0,01 Ωto 19,99 Ω
Supply Range:
100-440V Phase to Phase
Nominal Supply:
230 V, 50 Hz
EN61557 Operating Range:
0,25 Ωto 19,99 Ω
Intrinsic accuracy:
±5% ±0,03 Ω
PROSPECTIVE FAULT
CURRENT
Prospective fault current =
Nominal voltage
Loop resistance
Prospective Fault Current is
calculated from the respective
loop resistance. Ranges and
accuracy’s are therefore
derived from the previous
section.
LINE - EARTH LOOP
RESISTANCE
MEASUREMENT AT15 mA
(to EN 61557-2)
Loop L-PE 0.1Ω
Displayed Range:
0,1 Ωto 2,00 kΩ
Nominal Supply:
230 V 50 Hz
EN61557 Operating Range:
5,0 Ωto 2,00 kΩ
Intrinsic accuracy:
up to 200 Ω±3%
±0,3 Ωover 200 Ω±5% ±5 Ω
Noise Immunity:
1Ωof reading within 0,3 Ωon
a normal domestic supply.
LOOP L-PE 0.01Ω
Displayed Range:
0,01 Ωto 10,00 Ω
EN61557 Operating Range:
0.5 Ωto 10,00 Ω
Nominal Supply:
230 V 50 Hz
Intrinsic accuracy:
±5% ±0,05 Ω
Noise Immunity:
1 Ωof reading within 0,05 Ω
on a normal domestic supply
RCD TESTING (to
EN61557-6 up to 500 mA)
Selectable Ranges:
30, 100, 300, 500, 1000 mA
Variable Range:
10 mA to 1000 mA
Test Facilities:
Contact voltage tests at 11/2I
∆n Loop resistance tests at 1/2I
∆n
No Trip tests at 1/2I ∆n
Trip tests at I ∆n, 5I ∆n
Fast Trip test at 150 mA
Ramp tests
RCD Types:
General purpose, delayed
(Selective) and d.c. Sensitive
Nominal Supply:
230 V, 50 Hz
Supply Range:
100 - 280 V, 45 - 65 Hz
1/2I ∆n TEST CONTACT
VOLTAGE
Displayed range:
0 V to 90 V
Measurement range:
5 V to 90 V
LOOP RESISTANCE
(measured at 1/2I ∆n )
I ∆n RESOLUTION
10 0,5 kΩto 9 kΩ
30 170 Ωto 3 kΩ
100 50 Ωto 900 Ω
300 17 Ωto 300 Ω
500 10 Ωto 180 Ω
1000 5 Ωto 90 Ω
2 SECOND NO TRIP TEST
at 1/2I ∆n (optional)
Test current duration:
2 seconds
Intrinsic Test Current
accuracy:
-8% to -2%
TRIP TESTS
I ∆n Trip Test Automatic 1/2
∆n test, followed by a 30
second delay (Selective type
only) then a Trip test.
General purpose Test:
Ωn test for up to 300 ms
Selective Test:
∆n test for up to 2000 ms
D.C. Sensitive Trip (For
RCDs up to 300 mA)
As the I ∆n Trip Test above,
but test current is a half wave
rectified a.c.with an r.m.s.
value of √2 ∆n.
5I ∆n Trip Test (for RCDs
up to 100 mA)
Test follows the same
sequence of 1/2I ∆n test, 30
second delay (Selective type
only) as the I ∆n test.
General purpose test
5I ∆n test for up to 40 ms
Selective test
5I ∆n test for up to 150 ms
TIMED TRIP TESTS
Trip time displayed Range:
0,1 ms to test time limit
Intrinsic Trip time accura-
cy: ±1% ±1 ms
Intrinsic Test Current accu-
racy: 2% to +8%
Ramp Test (Trip current
measurement)
Automatic 1/2I ∆n test
followed by a 30 second delay
(Selective type RCD only) then
an incremental ramp test.
Intrinsic Ramp Test Current
accuracy:
±3%
I ∆n RAMP RANGE INCREMENT
10 5 - 15 mA 1 mA
30 15 - 50 mA 1 mA
100 50 - 150 mA 2 mA
300 50 - 300 mA 6 mA
500 250 - 500 mA 10 mA
1000 500 - 1020 mA 52 mA
150 mA 40 ms Trip Test:
Stand alone test at 150 mA for
40 ms
Displayed Range: 0,1 ms to 40
ms
POWER SUPPLY
6 x 1,5 V Alkaline cells type
LR6 or 1,5V nickel cadmium
rechargeable cells.
FUSES
Non replaceable 2 x 7 A (SIBA
70-065-63)
TEMPERATURE RANGE
Operating:
-5ºC to +40ºC up to 90% RH
Storage:
-25ºC to +65ºC up to 90% RH
IEC 61557 / EN 61557
Complies with the following
parts of EN61557, Electrical
safety in low voltage systems
up to 1000 V a.c. and 1500 V
d.c. - Equipment for testing,
measuring or monitoring of
protective measures:-
Part1 - General requirements
Part 2 - Loop resistance
Part 3 - Residual current
devices (RCDs)
Part 10 - Combined Measuring
Equipment.

LCB2000/2 AND LCB2500/2
Premium Loop & Circuit Breaker Testers
ORDERING INFORMATION
Item (Qty) Order Code
Premium Loop/Circuit Breaker Tester LCB2000/2
Premium Loop/Circuit Breaker Tester LCB2500/2
With download, printing and storage
Included Accessories
User Guide Depends on V
Variant
3-Wire Test Lead Set, 2Prods, 3 clips 6231-632
Mains Plug Test Lead Depends on
variant
Test and Carry Case 6420-122
Download Manager Software on CD 6111-442
(LCB 2500/2 only)
Optional Accessories
UK Mains Plug Test Lead 6231-633
Euro Mains Plug Test Lead 6231-635
2-Wire Test Lead Set With Prods and Clips 6231-631
(not for 0.01Ωnon-trip loop tests)
2 Wire Test Lead 5m long 6231-637
(not for 0.01Ωnon-trip loop tests)
Lead Set (Earth Bond) (5 Pin) 6231-634
Switched Probe SP2 6231-636
Fused Probe and Clip Set 6180-405
Computer Serial Lead (LCB 2500 only) 25955-025
Printer Serial lead (LCB 2500 only) 25955-026
Item (Qty) Order Code
Optional Software
PowerSuite for Windows See supplier
(Comprehensive Electrical Testing Software)
NICEone 6111-403
(Certification software for producing NICEIC certificates)
PowerSuite XPress Certification Software 6111-519
Publications
Testing Electrical Installations (Book) 6172-129
‘A Stitch in Time’ (Video) AVTM21-P8
‘Getting Down To Earth’ (Book) AVTB25-TA
A practical manual on earth resistance testing
SAFETY
The LCB2000/2500/2 comply
with the latest international
directives concerning safety
and electromagnetic
compatibility.
The instruments meet the
requirements for double
insulation to IEC61010-1
(1995), EN61010-1 (1995)
Safety Requirements for
electrical equipment for
measurement, control, and
laboratory use. Category III**,
300 Volts phase to earth
(ground) and 440 Volts phase
to phase, without the need for
separately fused test leads. If
required, fused test leads are
available as an optional
accessory.
** Relates to the transient over-
voltages likely to be met in
fixed wiring installations.
Electromagnetic
Compatibility
The LCB 2000/2500/2 series
complies with IEC 61326-1
Environmental
Conditions
Operating range: -5 to +40ºC
Operating humidity: 90% RH
at 40ºC max.
Storage temperature range:
-25 to +65ºC
Calibration Temperature:
+20ºC
Maximum altitude: 2000 m
Dust and water protection:
IP54
Physical Specifications
Dimensions
Height: 230 mm (9.1 inches)
Width: 114 mm (4.5 inches)
Depth: 62 mm (2.4 inches)
Weight 920 g (2.0lbs)
(including batteries)
Cleaning
Wipe with a clean cloth
damped with soapy water or
Isopropyl
UK
Archcliffe Road Dover
CT17 9EN England
T [phone]
F [phone]
UNITED STATES
4271 Bronze Way
Dallas TX75237-1088 USA
T 800 723 2861 (USA only)
T [phone]
F [phone]
OTHER TECHNICAL SALES OFFICES
Valley Forge USA, Toronto CANADA,
Mumbai INDIA, Trappes FRANCE,
Sydney AUSTRALIA, Madrid SPAIN
and the Kingdom of BAHRAIN.
Registered to ISO 9001:2000 Reg no. Q 09290
Registered to ISO 14001 Reg no. EMS 61597
LCB2000_2_LCB2500_2_DS_en_V10
www.megger.com
Megger is a registered trademark