Melitta cremio User manual

Version 2.3
01/2013
Melitta Europa
GmbH & Co. KG
D-32372 Minden
Operating Instructions
GB
Umschlag_Cremio_2.3.indd 1 20.12.2012 10:47:43

1
AB
C
2
5
6
8
10
D
7
3
9
4
min.
max.
max.
11 12
Umschlag_Cremio_2.3.indd 2 20.12.2012 10:47:44

17
GB
Dear Customer,
Congratulations on buying your Melitta®Cremio milk frother!
We would like to welcome you as a milk froth lover and as
someone who enjoys a variety of co󰘯ee specialties. With your
new Melitta® Cremio milk frother, you will experience many
special moments of enjoyment. Whether cold or warm - enjoy
your favourite co󰘯ee specialities and indulge yourself with all
your senses!
Please read these operating instructions carefully and
thoroughly and keep them in a safe place so that you and your
guests can enjoy the Melitta®Cremio for a long time.
Should you require more information or if you have any
questions on this milk frother, please contact us directly
([phone]) or visit us on the Internet at www.melitta.de.
Here you will also 󰘰nd useful tips and inspiring recipes.
We extend our best wishes for your satisfaction with the
Melitta®Cremio.
Your Melitta®Cremio team
® Registered trademark of a company of the Melitta Group
Heft_Cremio_2.3.indd 17
21.12.2012 11:25:06

18
Information about these operating instructions
Warning!
Sections with this symbol contain information for your safety and
indicate possible accident and injury hazards.
Intended use
The Melitta® Cremio milk frother is exclusively designed for
the preparation of warm and cold milk froth as well as for
heating milk.
This appliance is intended for home use and in similar
settings, such as: Employee kitchens in stores, o󰘲 ces and
other commercial areas; in agricultural facilities; by customers
at hotels, motels and other housing facilities; at bed and
breakfasts.
Intended use includes,
• that you carefully read, understand, and comply with the
operating instructions.
• that you particularly comply with the safety instructions.
• that you use the Melitta® Cremio within the operating
conditions speci󰘰 ed in these instructions.
Heft_Cremio_2.3.indd 18
21.12.2012 11:25:06

19
GB
Non-intended use
Non-intended use applies when you use the Melitta®Cremio
in a manner that di󰘯 ers from the use described in these
operating instructions.
Warning!
Through non-intended use you can injure or scald yourself.
Note
The manufacturer bears no liability for damage attributed to
improper use.
Heft_Cremio_2.3.indd 19
21.12.2012 11:25:06

20
General safety instructions
Please read the following instructions carefully. Failure to
comply with the instructions can a󰘯 ect your own safety and
the safety of the appliance.
Warning!
–Keep the following objects out of the reach
of children: packaging materials and small
parts.
–All persons using the appliance must be
familiar with the operation of the appliance
beforehand, and they must be instructed in
the possible hazards associated with the
appliance.
–Never allow children to use the appliance
or play near the appliance unsupervised.
–Only use this appliance if it is in faultless
condition.
–Never immerse the appliance in water.
–Do not make any changes to the appliance,
its components or to the accessories
supplied.
–Never touch the appliance with wet hands
or feet.
–Comply with the safety instructions on the
next page.
Heft_Cremio_2.3.indd 20
21.12.2012 11:25:06

21
GB
Warning!
–Never reach into the interior of the
appliance when it is in operation.
–The appliance can be used by children
above 8 years of age and by people with
limited physical, sensory or mental abilities
or lacking experience and knowledge if
they are supervised or were instructed
on the safe use of the appliance and
understand the resulting dangers. Children
are not allowed to play with the appliance.
Cleaning and maintenance by the user
may not be performed by children and
people with limited physical, sensory or
mental abilities or lacking experience and
knowledge if they are not supervised.
–Never touch hot surfaces on the appliance.
–Never attempt to repair the appliance
yourself. If repairs are necessary please
contact the Melitta®Service Hotline
([phone]) only.
Heft_Cremio_2.3.indd 21
21.12.2012 11:25:06

22
Warning!
Danger of 󰘰 re and electric shock due to
incorrect supply voltage, incorrect or damaged
connections and power cord.
–Ensure that the supply voltage agrees with
the supply voltage speci󰘰 ed on the type
plate of the appliance.
–Ensure that the power outlet meets the
applicable standards for electrical safety. If
in doubt contact a quali󰘰 ed electrician.
–Never use damaged power cords
(damaged insulation, bare wires).
–Only have the damaged power-supply
cord replaced by the manufacturer or by
quali󰘰 ed specialists.
–Appliance is only to be used with the stand
provided.
–Never place the appliance on hot surfaces
or in wet areas.
Heft_Cremio_2.3.indd 22
21.12.2012 11:25:06

23
GB
Appliance description
Legend for Fig. A (see cover)
No. Explanation
1 Lid
2 Sealing
3 Frothing rod
4 Container
5 Handle
6 Button: to froth warm milk & heat milk
7 Button: to froth cold milk
8Station with power-supply cord
9 Cord storage
10 Milk frothing attachment (cappuccino)
11 Milk frothing attachment (latte macchiato)
12 Milk heating attachment
Starting up
• Carefully rinse the inside of the appliance under running
water (see page 26).
• Carefully read the safety instructions before starting up
(see page 20-22).
Setting up
Place the appliance on a stable, even, and dry surface.
Connect
Plug the cord into an appropriate power outlet.
Heft_Cremio_2.3.indd 23
21.12.2012 11:25:07

24
Preparation of co󰘯ee- & milk specialities
Warm milk froth Cold milk froth Heating milk
Filling quantity:
100 ml - 200 ml
Filling quantity:
100 ml - 400 ml
Open the lid by turning it anti-clockwise (Fig. B) and remove it.
Pour the desired amount of milk into the container. Pay attention to
the min. and max. 󰘰lling levels on the container (Fig. C).
Frothed milk expands and will over󰘱ow if it is
󰘰lled above the max. level.
Screw the milk froth attachment (Fig. A,
No. 10/11) onto the frothing rod.
Screw the milk
attachment
(Fig. A, No. 12) onto
the frothing rod.
Place the lid on the container and turn it clockwise (Fig. D) as far as
possible. The closed lid must be aligned with the handle.
Press the button
(Fig. A, No. 6), if
you want to prepare
warm milk froth.
Press the button
(Fig. A, No. 7), if you
want to prepare cold
milk froth.
Press the button
(Fig. A, No. 6).
The indicator light on the respective button is illuminated. The milk
froth preparation starts.
The preparation stops automatically. The motor stops and the
indicator light on the button turns o󰘯.
Turn the lid anti-clockwise (Fig. B) and remove it.
Pour the milk or milk froth in your cup or spoon it carefully out of the
container, without damaging the non-stick coating.
Clean the Melitta® Cremio (see page 26).
Heft_Cremio_2.3.indd 24
21.12.2012 11:25:07

25
GB
Note
–Use refrigerated milk to prepare your milk froth (7-8 °C).
–You can use all kinds of standard milk variants
(independent of fat level). Even soy or lactose free milk
can be frothed perfectly with Melitta® Cremio. The protein
content is relevant for an excellent milk froth result. The
higher the proportion the more stable and 󰘰 ne pored the
result.
–Keep the lid closed during preparation. Press the button
(Fig. A, No. 6) or again or remove the appliance from
the station to stop the preparation manually.
Recipes
1. Cappuccino
• Use the milk frothing attachment for a cappuccino (Fig. A,
No. 10) and prepare the warm milk froth according to the
list above.
• At 󰘰 rst 󰘰 ll the Espresso into your cappuccino cup,
afterwards add the milk froth (see page 24). For a
perfect cappuccino we recommend a proportion of 1/3
espresso and 2/3 milk froth.
2. Latte Macchiato
• Use the milk frothing attachment for a latte macchiato
(Fig. A, No. 11) and prepare the warm milk froth
according to the list above.
• At 󰘰 rst 󰘰 ll the prepared milk and the milk froth (see page
24) into the latte macchiato glas, afterwards add the
espresso. For a perfect latte macchiato we recommend
a proportion of 2/3 milk and 1/3 milk froth and a cup of
espresso.
Heft_Cremio_2.3.indd 25
21.12.2012 11:25:07

26
Cleaning and maintenance
• Carefully rinse the inside of the appliance under running
water.
• Clean the appliance with a soft, damp cloth and ordinary
washing up liquid to avoid a damaging of the non-stick
coating inside the container. Make sure that the silver-
coloured contacts on the handle do not get wet.
• Carefully rinse the attachment under running water.
Caution!
The motor is located in the lid and can be damaged if it gets wet.
–Never rinse the lid under running water.
–Never wash the appliance in the dishwasher.
Never use sharp or pointed objects to extract the milk froth
(could cause damages to the non-stick coating).
Note
–Cleaning is easier if you clean the appliances inmediately
after use.
–In the case of persistent soiling please use the Melitta®
PERFECT CLEAN ESPRESSO MACHINES Milk System
Cleaning Liquid (Fill 25 ml of the Milk System Cleaning
Liquid into the appliance and add water up to 250 ml).
Let the mixture of water and Melitta® PERFECT CLEAN
ESPRESSO MACHINES Milk System Cleaning Liquid act
upon for a few moments. Afterwards remove persistent
soiling with a smooth cloth or sponge.
Heft_Cremio_2.3.indd 26
21.12.2012 11:25:07

27
GB
Troubleshooting
Problem Cause Solution
After pressing a
button, the indicator
light (Fig. A,
No. 6) 󰘱ashes three
times.
The lid is not closed
properly.
Close the lid prop-
erly. The closed lid
must be aligned with
the handle.
The appliance is too
hot.
Let the appliance
cool down.
After pressing a
button, the indicator
light (Fig. A,
No. 7) 󰘱ashes three
times and after that
switches o󰘯, the
appliance doesn't
start.
The lid is not closed
properly.
Close the lid
properly. The closed
lid must be aligned
with the handle.
The appliance
stops the process
too early, and the
indicator light turns
o󰘯.
The container is
empty or not 󰘰lled to
the minimum level
and the temperature
monitoring function
was triggered.
Rinse out the
appliance and let it
cool down.
No milk froth Not enough milk, the
attachment doesn't
touch the milk.
Fill up until min.
mark.
Wrong whisk. Use a whisk for
frothing (Fig. A, No
10/11).
Milk froth is
over󰘱owing out
of the top of the
appliance.
The appliance is
over󰘰lled.
Disconnect the plug.
Let the appliance
cool down and then
clean it.
Wrong whisk. Use the right whisk.
Heft_Cremio_2.3.indd 27
21.12.2012 11:25:08

28
Problem Cause Solution
The milk frother
stops the process
and the indicator
lamps are 󰘱ashing
three times.
Motor is overloaded. Please contact the
customer service.
Contact the Melitta®customer service ([phone]) if the
above mentioned measures do not help to solve the problem.
Disposal
Please dispose the appliance in an environmentally
responsible manner via suitable collection systems.
Heft_Cremio_2.3.indd 28
21.12.2012 11:25:08

29
GB
Terms of guarantee
In addition to the legal guarantee claims, to which the end user is entitled
relative to the seller, for this device, if it was purchased from a dealer authorized
by Melitta® due to his consulting competence, we grant a manufacturer's
guarantee under the following conditions:
1. The guarantee period begins with the day the product was sold to the end
user. The guarantee is 24 months. The purchase date of the device must be
veri󰘰ed by a purchase receipt. The device was designed and built for household
use only. It is not dedicated for a commercial use. Guarantee performances
lead neither to an extension of the guarantee period nor to a new beginning of
the guarantee period for the device or installed spare parts.
2. Within the guarantee period we will correct all device defects that are based
on material or manufgacturing errors, through repair or replacement of the
device at our discretion. Replace parts become the property of Melitta®.
3. Defects that occurred due to improper connection, improper handling, or
repair attempts by nonauthorized persons are not covered by the guarantee.
The proof of lacking cause for the defect is imposed on the end user. The same
applies for failure to comply with the use, care, and maintenance instructions
as well for the use of consumables (e.g. cleaning and decalcifying agents or
water󰘰lters) that do not correspond to the original speci󰘰cations. Wear parts
(e.g. seals and valves) and fragile parts like glass are excluded from the
guarantee.
4. Guarantee performances are processed via the Service Hotlines for the
respective country* (see information below).
5. These guarantee conditions apply for devices purchased and used in UK.
If devices are purchased in foreign countries or brought into foreign countries,
then guarantee performances will only be provided as speci󰘰ed in the guarantee
conditions applicable for this country.
*Melitta Europa GmbH & Co. KG
Ringstraße 99
D-32427 Minden
Germany
Email to: [email protected]
Heft_Cremio_2.3.indd 29
21.12.2012 11:25:08

30
Heft_Cremio_2.3.indd 30
21.12.2012 11:25:08