Membrane Solutions T33-F10-QC User manual

R
MODEL: T33-F10-QC
FUNCATION:Effective at removing
odor and significantly improving the water
taste.
Membrane Solutions T33 post carbon filter
designed for use on any point of use drinking
water appliance including reverse osmosis
(RO) systems, distillation systems, coffee and
espresso brewers, food service equipment,
ice machines, misters, bottle less water
coolers, water fountains, refrigerators and
other water dispensing devices, helping to
produce cleaner, fresher tasting water.
How to Change the Inline Cartridge:
Installation Notes:
Please note the direction of water flow indicated on the product.
Always flush a new cartridge for 5 minutes before use and check for leaks.
If leaks do occur, check the 1/4-inch tube is correctly inserted all the way into the
quick-connectors.
We recommend replacing the inline cartridge after 12-months if used as a polisher
cartridge in an under-sink RO water system or every 2000 gallons, 6-months or
when the flow rate becomes too slow when using the inline filter on its own.
T33
At least 3/5" in
Lock
HOW TO DISCONNECT
HOW TO CONNECT

4530 B St NW #A, Auburn WA 98001
FILTER CARTRIDGE REPLACEMENT
(1) Remove safety clip.
(2) Push the collet in and hold the filter.
(3) Pull the filter tube straight out and discard old filter.
[NOTE] Prepare towel and bowl under the filter as
water might spill out.
(4) Cut the both ends of the water tube flat with tools.
(5) Mark the end of PE pipe about 3/5"(15mm) length
with vernier caliper or ruler.
[NOTE] Making sure the ends are square and no burrs
protrude. Deburr ends with file or sandpaper if necessary.
(6) Insert the tube with mark firmly until it fits tightly.
(7) Reinsert the tube clip.
[NOTE] Please note flow direction. Failure to follow will
result in bad performance.
(8) Flush cartridge for 5 minutes before use. The fine
carbon particles will be removed during the flushing.
[NOTE] It is normal for water to appear black for the
first few seconds of the flushing procedure.
(9) Insert the tube at the other end and reinsert the
tube clip. Pull out slightly on tubing to ensure a good seal.
Now you have completed the replacement.
A.
B.
C.
D.
E.
05:00
2
76
3
1
45
Flow
A
B
C
D
E
@MSPureLife www.mspurelife.com
15mm