Memorex MVDP1075 User manual

Before operating this product,
please read these instructions completely.
User’sGuide
7'' TFT DISPLAY PORTABLE DVD PLAYER
WITH REMOTE CONTROL
MVDP1075

Contents ..........................1
Important Safety Instructions.........2
Precautions .......................5
Power Sources.....................7
Location of Controls ................9
• Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . 9
• Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
• Remote . . . . . . . . . . . . . . . . . . . . . . . . . 10
Remote Control ...................11
• Battery Installation . . . . . . . . . . . . . . . . . 11
• Effective Distance of the
Remote Control Transmitter. . . . . . . . . . 11
Connection .......................12
• Connecting the DVD to a TV Using the
A/V Cable. . . . . . . . . . . . . . . . . . . . . . . . 12
• Connecting the DVD to a TV Using the
S-Video Cable . . . . . . . . . . . . . . . . . . . . 13
• Connecting the DVD to a Home
Theater System (Audio Jack) . . . . . . . . 14
• Connecting the DVD to a Home
Theater System (Coaxial Jack) . . . . . . . 15
About Discs ......................16
Setup Menu.......................18
• General Setup Menu . . . . . . . . . . . . . . . 19
•Audio Setup Menu . . . . . . . . . . . . . . . . . 20
• Dolby Setup Menu. . . . . . . . . . . . . . . . . 21
• Video Setup Menu . . . . . . . . . . . . . . . . . 22
• Preference Setup Menu. . . . . . . . . . . . . 23
•Parental.........................24
• Password. . . . . . . . . . . . . . . . . . . . . . . . 25
Basic Operation ...................26
• Mute. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
• P/N (PAL/NTSC) Button . . . . . . . . . . . . 26
• Headphone Jack . . . . . . . . . . . . . . . . . . 26
• LCD Mode . . . . . . . . . . . . . . . . . . . . . . . 26
• Display Button . . . . . . . . . . . . . . . . . . . . 27
DVD Operation ....................28
•Playback of a DVD . . . . . . . . . . . . . . . . 28
• Skip . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
• Search . . . . . . . . . . . . . . . . . . . . . . . . . . 30
• Slow Motion . . . . . . . . . . . . . . . . . . . . . . 30
• Pause/Step . . . . . . . . . . . . . . . . . . . . . . 30
• Title/Chapter Search . . . . . . . . . . . . . . . 31
• Title/Time Search. . . . . . . . . . . . . . . . . . 31
• Chapter/Time Search. . . . . . . . . . . . . . . 31
•RepeatPlayback..................32
• Repeat A-B Playback. . . . . . . . . . . . . . . 32
• Audio Menu . . . . . . . . . . . . . . . . . . . . . . 33
• Subtitle Menu. . . . . . . . . . . . . . . . . . . . . 33
• DVD Menu . . . . . . . . . . . . . . . . . . . . . . . 33
• Title Menu . . . . . . . . . . . . . . . . . . . . . . . 33
• Zoom In . . . . . . . . . . . . . . . . . . . . . . . . . 34
• Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
• Resume . . . . . . . . . . . . . . . . . . . . . . . . . 34
• Programmed Playback . . . . . . . . . . . . . 35
CD Operation .....................36
• Playback of a CD. . . . . . . . . . . . . . . . . . 36
• Random Playback . . . . . . . . . . . . . . . . . 37
• Skip . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
• Search . . . . . . . . . . . . . . . . . . . . . . . . . . 37
• Pause. . . . . . . . . . . . . . . . . . . . . . . . . . . 38
•Selecting Tracks Using the Number
Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . 38
• Repeat Playback . . . . . . . . . . . . . . . . . . 38
• Repeat A-B Playback. . . . . . . . . . . . . . . 38
Picture CD Operation ..............39
Troubleshooting Guide .............40
Care and Maintenance..............42
Specifications.....................43
1
TABLE OF CONTENTS

2
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
THIS DIGITAL VIDEO DISC PLAYER EMPLOYS A LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS OWNER’S
MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT
REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE
SERVICE PROCEDURE.
USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE
ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE
IS OPENED. DO NOT STARE INTOBEAM.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING:
TOREDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
DANGEROUS VOLTAGE:
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
ATTENTION:
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.

3
IMPORTANT SAFETY INSTRUCTIONS
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modification not authorized by the manufacture may void user authority to operated this
device.
FCC CAUTION:
To assure continued compliance, follow the attached installation instructions and use only
shielded cables when connecting to other devices. Also, any changes or modifications not
expressly approved by the party responsible for compliance could void the user’sauthority to
operate the equipment.
ATTENTION:
POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE
DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISES ET POUSSER
JUSQU’AU FOND.
IMPORTANT:
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE
YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE.
LASER WARNING:
This unit employs a Laser only qualified service personal should attempt to service this device
due to possible eye injury.
SURGE PROTECTORS:
It is recommended to use a surge protector for AC connection. Lightning and power surges
ARE NOT covered under warranty for this product.

Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of
your musical enjoyment. Now it’s time to consider how you can maximize the fun and
excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your equipment
by playing it at a safe level. One that lets the sound come through loud and clear without
annoying blaring or distortion and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After
all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and
the Electronic Industries Association’s Consumer Electronics Group recommend you avoid
prolonged exposure to excessive noise. This list of sound levels is included for your protection.
Decibel
Level Example
30 Quiet library, soft whispers
40 Living room, refrigerator, bedroom away from traffic
50 Light traffic, normal conversation, quiet office
60 Air conditioner at 20 feet, sewing machine
70 Vacuum cleaner, hair dryer, noisy restaurant
80 Average city traffic, garbage disposals, alarm clock at two feet
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90 Subway, motorcycle, truck traffic, lawn mower
100 Garbage truck, chain saw, pneumatic drill
120 Rock band concert in front of speakers, thunderclap
140 Gunshot blast, jet engine
180 Rocket launching pad
Information courtesy of the Deafness Research Foundation.
4
IMPORTANT SAFETY INSTRUCTIONS
A
S
S
O
C
I
A
T
I
O
N
EST. 1924
E
L
E
C
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
EIA
We
LISTENING
For A Lifetime
Want You

5
PRECAUTIONS
NOTES ON HANDLING:
• When shipping the DVD player, always use the original shipping carton and
packing materials. For maximum protection, repack the unit as it was
originally packed at the factory.
• Do not use volatile liquids, such as insect spray, near the DVD player. Do not
leave rubber or plastic products in contact with the DVD player for a long
time. They will leave marks on the finish.
• The top and rear panels of the DVD player may become warm after a long
period of use. This is normal and not a malfunction.
• When the DVD player is not in use, be sure to remove the disc and turn off
the power.
• If you do not use the DVD player for a long period, the unit may not function
properly in the future. Turn on and use the DVD player occasionally.
NOTES ON LOCATING THE DVD PLAYER:
•When you place this DVD player near a TV, radio or VCR, the playback
picture may become poor and the sound may be distorted. In this case, move
the DVD player away from the TV, radio or VCR.
NOTES ON CLEANING:
Use a soft, dry cloth for cleaning.
•For stubborn dirt, soak the cloth in a weak detergent solution, wring well and
wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as
thinner or benzene, as they may damage the surface of the DVD player.
• If you use a chemical-saturated cloth to clean the unit, follow that product’s
instructions.
Warning: Cleaning and adjustment of lenses and/or other components of
playback mechanism should be performed by a qualified service technician.
CAUTION:
To reduce the risk of injury, only charge with supplied rechargeable Battery Pack;
other types of batteries may burst causing personal injury or damage.

6
PRECAUTIONS (CONTINUED)
TO OBTAIN A CLEAR PICTURE:
The DVD player is a high technology, precision device. If the optical pick-up lens
and disc drive parts are dirty or worn down, the picture quality becomes poor. To
obtain a clear picture, we recommend regular inspection and maintenance
(cleaning or parts replacement) every 1,000 hours of use depending on the
operating environment. For details, contact your nearest dealer.
NOTES ON MOISTURE CONDENSATION:
Moisture condensation damages the DVD player. Please read the following
carefully.
•Moisture condensation occurs, for example, when you pour a cold drink into a
glass on a warm day. Drops of water form on the outside of the glass. In the
same way, moisture may condense on the optical pick-up lens inside this unit,
one of the most crucial internal parts of the DVD player.
Moisture condensation occurs during the following cases:
•When you bring the DVD player directly from a cold place to a warm place.
• When you use the DVD player in a room where you just turned on the heater,
or a place where the cold wind from the air conditioner directly hits the unit.
• In summer, when you use the DVD player in a hot and humid place just after
you moved the unit from an air conditioned room.
• When you use the DVD player in a humid place.
Do not use the DVD player when moisture condensation may occur.
• If you use the DVD player in such a situation, it may damage discs and
internal parts. Remove the disc, insert the small end of the AC adapter into
the DC IN jack on the side of the unit and insert the other end into a
conveniently located AC outlet having 120 AC, 60 Hz, turn on the DVD player
and leave it “ON” for two or three hours. After two or three hours, the DVD
player will have warmed up and evaporated any moisture. Keep the DVD
player connected to the wall outlet and moisture condensation will seldom
occur.

AC CONNECTION
Insert the small end of the AC adapter into the
jack on the side of the unit. Insert the other end
(with the 2 blades) into a conveniently located
AC outlet having 120V AC, 60Hz. DO NOT insert
into the DC IN CHARGE jack.
AC ADAPTER SPECIFICATIONS: DV9V Z
NOTES:
• To disconnect the AC adapter, remove it
from the DC IN jack on the side of the unit as
well as from the AC outlet.
• Use the enclosed AC adapter for this
product only.
BATTERY PACK INSERTION/REMOVAL
Follow the diagram below to insert or remove the battery pack.
7
POWER SOURCES
TOREMOVE: Slide the Battery Release
switch, then slide in the direction of the arrow
A, then arrow B.
Battery Release Switch
B
A
B
A
1
TOINSERT:Align tabs from the battery into
the holes in the unit, then slide the battery in
the direction of the arrow A, then up in the
direction of arrow B.
Battery Release Switch
B
A
B
A
2
To DC 9V IN Jack

CHARGING THE BATTERY PACK
“LOW BATTERY” will appear on the screen when the battery is low and needs
recharging. The battery can be charged while attached or not attached to the unit
as follows:
WITH THE BATTERY ATTACHED TO THE UNIT:
With the battery pack attached, insert the small end of the AC adapter
into the DC IN CHARGE jack on the side of the battery pack or the DC IN
jack on the side of the unit. Insert the other end (with the 2 blades) into a
conveniently located AC outlet having 120V AC, 60Hz. The CHARGE indicator will
light red as the battery is charging and green when charging has completed.
Disconnect the AC adapter plugs when charging has finished.
WITH THE BATTERY NOT ATTACHED TO THE UNIT:
You can also charge the battery when it is not attached to the unit by inserting the
small end of the AC adapter into the DC IN CHARGE jack on the side of the battery
pack. Insert the other end (with the 2 blades) into a conveniently located AC outlet
having 120V AC, 60Hz. The CHARGE indicator will light red as the battery is
charging and green when charging has completed. Disconnect the AC adapter
plugs when charging has finished.
NOTE:
• Fully charge the battery pack (8 hours) before using it for the first time. After the
initial charge, it should take approximately four hours to charge.
• The battery can charge up for approximately 300 times.
• A fully-charged battery can operate for about two hours.
USING THE CAR ADAPTER
Plug the small end of the car adapter into the DC IN jack and then plug the other
end into the car cigarette lighter socket.
8
POWER SOURCES (CONTINUED)

1. Unit OPEN Switch
2. Display
3. Left Speaker
4. MENU Button
5. CHARGE Indicator (Side of the
Rechargeable Battery)
6. DC IN CHARGE Jack 9V z
(Side of the Rechargeable
Battery)
7. DC IN Jack 9V z(Side of
the Main Unit)
8. Disc Compartment
9. Disc Door OPEN Button
10. Remote Sensor
11. Right Speaker
12. LCD MODE Button
13. ENTER Button
14. Navigation (√,®,π,†) Buttons
15. SETUP Button
16. Power ON/Play/Pause (®p)
Button
17. Power OFF/Stop (■) Button
18. Power Indicator
9
LOCATION OF CONTROLS
2
8
4
9
10
1
3
6
7
5
12
13
11
14
15
17
18
16
MAIN UNIT

10
LOCATION OF CONTROLS (CONTINUED)
1 2 3 4 5 76
3
6
8
9
7
4
216
5
12
10
13
11
14
15
1
17
18
19
20
21
22
23
24
25
26
27
28
SIDE
REMOTE
1. VOLUME Control
2. Headphone Jack
3. AUDIO OUT Jack
4. VIDEO/COAXIAL OUT Jack
5. S-VIDEO OUT Jack
6. Battery Release Switch
(Bottom of the Battery Pack)
7. Battery Pack
1. DISPLAY Button
2. MENU Button
3. STANDBY Button
4. 0-9/10+ Number Buttons
5. PROGRAM Button
6. GOTO Button
7. TITLE Button
8. AUDIO Button
9. PLAY/ENTER Button
10. SETUP Button
11. STEP Button
12. SLOW Button
13. PAUSE Button
14. Skip (o)Button
15. Skip (n)Button
16. MUTE Button
17. REPEAT Button
18. REPEAT A-B Button
19. P/N (PAL/NTSC Button)
20. ANGLE Button
21. SUB-T Button
22. ZOOM Button
23. Navigation (√,®,π,†)Buttons
24. RESUME Button
25. SHUFFLE Button
26. Stop (■) Button
27. Search ®® Button
28. Search√√ Button

12
CONNECTION
CONNECTING THE DVD TO A TV USING THE A/V CABLE (INCLUDED)
NOTES FOR CONNECTING TO A TV:
• If your TV has an S-Video input, connect the DVD player with the S-Video cable
for best results.
• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
• When connecting the DVD, refer to the owner’s manual of the TV, as well as
this manual.
• When connecting the DVD to the TV, make sure the power is off and both units are
unplugged before making any connections.
• Connect the DVD player to your TV directly. If you connect the DVD player
through a VCR, the playback picture will be distorted because DVD video discs
are copy protected.

13
CONNECTION (CONTINUED)
CONNECTING THE DVD TO A TV USING THE S-VIDEO CABLE (INCLUDED)
NOTES FOR CONNECTING TO A TV:
• If your TV has an S-Video input, connect the DVD player with the S-Video cable
for best results.
• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
• When connecting the DVD, refer to the owner’s manual of the TV, as well as
this manual.
• When connecting the DVD to the TV, make sure the power is off and both units are
unplugged before making any connections.
• Connect the DVD player to your TV directly. If you connect the DVD player
through a VCR, the playback picture will be distorted because DVD video discs
are copy protected.
• When using the S-VIDEO output, you should set the Component output to TV in
the VIDEO SETUP menu. Otherwise, the picture on the TV screen will keep
rolling. See page 22 to set the Component Output to TV.
• When the Component output is set to TV, the main unit’s screen display will turn
off automatically. To observe the pictures on the unit's display screen again,
power off the unit and power on again, the Component output will reset to LCD.

14
CONNECTION (CONTINUED)
CONNECTING THE DVD TO A HOME THEATRE SYSTEM (AUDIO JACK)
13
2
9
5
4
6
78
To Audio Inputs
From Audio Out From Video Out
To Video
Input
Video Cable (Included)
Audio Cable (Included)
NOTES FOR CONNECTING TO A TV:
•Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
• When connecting the DVD, refer to the owner’s manuals for the TV and the audio
system, as well as this manual.
• When connecting, make sure the power is off and all units are unplugged before making
any connections.
• Connect the DVD player to your TV directly. If you connect the DVD player through a
VCR, the playback picture will be distorted because DVD video discs are copy protected.
Place the subwoofer, front, rear and center
speakers in locations as shown/described
here. After correctly positioning the
speakers, perform the Tone Test on the AV
Amplifier and adjust the Volume control(s)
until the desired sound is achieved. For best
results, sit in the viewing position and have
someone adjust the volumes for you; this will
enable you to set the optimal levels.
NOTE: The rear speakers can also be
located on the side wall facing the viewing
position and each other. Make sure the
viewing position is located between the two
speakers in this case. Experiment to find
optimal position.
1. Front Left Speaker
2. Television
3. Center Speaker–can be located on top or
below the Television.
4. Sub-woofer–can be located anywhere in the
room.
5. Front Right Speaker
6. Viewing/Listening Position–The best
listening position is obtained by positioning the
chair, sofa, etc. in the middle of all the
speakers.
7. Rear Left Speaker
8. Rear Right Speaker
9. AV Amplifier w/Dolby Digital Decoder

15
CONNECTION (CONTINUED)
CONNECTING THE DVD TO A HOME THEATRE SYSTEM (COAXIAL JACK)
13
2
9
5
4
6
78
To PCM/BITSTREAM
From Video/Coaxial Out
To Video
Input
VIDEO/COAXIAL CABLE (INCLUDED)
NOTES FOR CONNECTING TO A TV:
•Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
• When connecting the DVD, refer to the owner’s manuals for the TV and the audio
system, as well as this manual.
• When connecting, make sure the power is off and all units are unplugged before making
any connections.
• Connect the DVD player to your TV directly. If you connect the DVD player through a
VCR, the playback picture will be distorted because DVD video discs are copy protected.
• Set the SPDIF option to PCM, see page 19.
Place the subwoofer, front, rear and center
speakers in locations as shown/described
here. After correctly positioning the
speakers, perform the Tone Test on the AV
Amplifier and adjust the Volume control(s)
until the desired sound is achieved. For best
results, sit in the viewing position and have
someone adjust the volumes for you; this will
enable you to set the optimal levels.
NOTE: The rear speakers can also be
located on the side wall facing the viewing
position and each other. Make sure the
viewing position is located between the two
speakers in this case. Experiment to find
optimal position.
1. Front Left Speaker
2. Television
3. Center Speaker–can be located on top or
below the Television.
4. Sub-woofer–can be located anywhere in the
room.
5. Front Right Speaker
6. Viewing/Listening Position–The best
listening position is obtained by positioning the
chair, sofa, etc. in the middle of all the
speakers.
7. Rear Left Speaker
8. Rear Right Speaker
9. AV Amplifier w/Dolby Digital Decoder

16
ABOUT DISCS
PLAYABLE DISCS:
The following discs can be played back on this DVD player:
The region number for this DVD Player is:
See the following page for information regarding region numbers.
1
DISC TYPES:
DVD
Data on most DVDs is divided into sections
called “titles” and then into subsections called
“chapters”, each of which is given a title or
chapter number. Some features of this DVD
player will not operate with some DVD discs
as they are preset. If a function you selected
does not run as desired, refer to the manual
accompanying the DVD disc.
AUDIO CD
Data on an audio CD is divided into sections
called “tracks”, each of which is given a track
number.
IMPORTANT:
It is important that you read the manual that accompanies the DVD disc, as there are
features that are on the DVD player that cannot be used with certain DVDs. There are also
extra features on the DVD disc that are different for each DVD disc, so they are not
explained in this owner’s manual.

Notes on Copyright:
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public
and rent copyrighted material without permission. DVD video discs are copy
protected, and any recordings made from these discs will be distorted. This product
incorporates copyright protection technology that is protected by method claims of
certain U.S. patents and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended for home and other
limited viewing uses only, unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Region Management Information:
This DVD Player is designed and manufactured to respond to the Region
Management Information that is recorded on a DVD disc. If the Region number
described on the DVD disc does not correspond to the Region number of this DVD
player, this DVD player cannot play that disc. You may not be able to play back
some DVD video discs on this player if they were purchased from outside your
geographic area or made for business purposes. When you try to play back an
unauthorized disc, "Wrong Region" appears on the TV screen.
17
ABOUT DISCS (CONTINUED)

The Setup Menu lets you customize the DVD player by allowing you to select
various language preferences, set up a parental level, turn screen saver on and off,
adjust what type of television screen you have and more.
Use the following instructions to navigate and change the options as described on
the upcoming pages.
1. While in the Stop mode, press the
SETUP button 1to enter the Setup
Menu.
2. Select one of the Setup icons at the
top of the screen using the Navigation
(√,®) buttons 2,then press the
PLAY/ENTER button 3to select it.
3. Use the Navigation (π,†) buttons 2to
select one of the Setup options, then
press the PLAY/ENTER button 3to
select it.
4. Use the Navigation (π,†) buttons 2to
change the desired setting, then press
the PLAY/ENTER button 3to make the
change.
5. Exit by pressing the SETUP button 1
again. To return to the previous menu,
simply press the Navigation (√)
button 2.
NOTE:
• To power on the unit, press the STANDBY button on the remote or press and
hold the Power ON/PLAY/PAUSE (®p)button on the main unit for two seconds.
To power off the unit, press the STANDBY button on the remote or press and
hold the Power Off/Stop (■)button on the main unit for two seconds.
18
SETUP MENU
2
1
3

19
SETUP MENU (CONTINUED)
NORMAL/PS: Pan Scan. Select when the unit is
connected to a conventional TV. Video material
formatted in the Pan Scan style is played back in that
style (the left and right edges are cut off).
NORMAL/LB: Letter Box. Select when the unit is
connected to a normal TV. Wide-screen images
are shown on the screen with a black band at the
top or bottom.
WIDE: Select when the unit is connected to a wide-
screen TV.
--General Setup Page - -
Normal/PS
Normal/LB
Wide
General Audio Dolby Video Preference
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Set TV Display Mode
- - General Setup Page - -
On
Off
General Audio Dolby Video Preference
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Set Angle Mark
- - General Setup Page - -
English
Spanish
French
Audio Dolby Video Preference
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Set Osd Language
-
General
G
1
Select ON to turn the anglemarks on and
OFF to turn them off.
- - General Setup Page - -
Normal/PS
Normal/LB
Wide
General Audio Dolby Video Preference
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Set TV Display Mode
- - General Setup Page - -
On
Off
General Audio Dolby Video Preference
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Set Angle Mark
- - General Setup Page - -
English
Spanish
French
Audio Dolby Video Preference
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Set Osd Language
- - General Setup Page - -
Off
Raw
Pcm
General Audio Dolby Video Preference
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Setup Spdif
General
General
-
1
GENERAL SETUP MENU:
Press the SETUP button to enter the menu, select GENERAL SETUP using the Navigation
(√,®)buttons, then press the PLAY/ENTER button to select it. Select/change the Setup option
as described on page 18.
TV DISPLAY ANGLE MARK
Select the desired language (ENGLISH,
SPANISH, FRENCH) for the On-Screen
display to display text. Note that the DVD must
have the language included in order to display
it.
- - General Setup Page - -
Normal/PS
Normal/LB
Wide
General Audio Dolby Video Preference
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Set TV Display Mode
- - General Setup Page - -
On
Off
General Audio Dolby Video Preference
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Set Angle Mark
- - General Setup Page - -
English
Spanish
French
Audio Dolby Video Preference
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Set Osd Language
-
General
G
1
OFF: An analog surround sound format is
output through the rear connectors for two
channel audio out or 5.1 channel audio out.
RAW or PCM: These surround sound
formats are output to a Dolby Digital decoder
through the COAXIAL OUT jack.
- - General Setup Page - -
On
Off
General Audio Dolby Video Preference
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Set Angle Mark
- - General Setup Page - -
English
Spanish
French
Audio Dolby Video Preference
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Set Osd Language
- - General Setup Page - -
Off
Raw
Pcm
General Audio Dolby Video Preference
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Setup Spdif
General
General
1
OSD LANGUAGE SPDIF OUTPUT