Memorex MVDP1102 - DVD Player - 10.2 User manual

REPEAT
PAUSE/
FRAME STOP
MENUDISPLAY
CLEAR GOTO
SETUP
BOOKMARK ZOOMSLOWTITLE
/OK
A-B PROG RANDOM
AUDIO ANGLE SUBTITLE
12 34
56
90
78
Before operating this product, please read these instructions completely.
Antes de operar este producto, lea este instructivo en su totalidad.
User’s Guide
Guía del usuario
10.2’’TFT DISPLAYPORTABLE DVD PLAYER
WITH REMOTE CONTROL
REPRODUCTOR DE DVD PORTÁTIL CON
PANTALLA TFT DE 10.2’’ Y CONTROL REMOTO
MVDP1102

Contents ..........................1
Important Safety Instructions.........2
Precautions .......................5
Power Sources.....................7
Location of Controls ................9
• Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . 9
• Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
• Remote . . . . . . . . . . . . . . . . . . . . . . . . . 10
Remote Control ...................11
• Battery Installation . . . . . . . . . . . . . . . . . 11
• Effective Distance of the
Remote Control Transmitter. . . . . . . . . . 11
Connection .......................12
• Connecting the Unit to a TV Using the
A/V Cable. . . . . . . . . . . . . . . . . . . . . . . . 12
• Connecting the Unit to a TV Using the
S-Video Cable . . . . . . . . . . . . . . . . . . . . 13
• Connecting Another Unit to this DVD
Player . . . . . . . . . . . . . . . . . . . . . . . . . . 14
About Discs ......................15
Setup Menu.......................17
• General Setup Menu . . . . . . . . . . . . . . . 18
• Audio Setup Menu . . . . . . . . . . . . . . . . . 19
• Video Setup Menu . . . . . . . . . . . . . . . . . 20
•Preference Setup Menu. . . . . . . . . . . . . 20
•TV Guardian . . . . . . . . . . . . . . . . . . . . . . 22
Basic Operation ...................25
• Headphone Jack(s) . . . . . . . . . . . . . . . . 25
•Screen Mode Button . . . . . . . . . . . . . . . 25
• Volume Control . . . . . . . . . . . . . . . . . . . 25
•DisplayButton....................26
DVD Operation ....................27
• Playback of a DVD . . . . . . . . . . . . . . . . 27
•Skip............................29
• Search . . . . . . . . . . . . . . . . . . . . . . . . . . 29
• Slow Motion . . . . . . . . . . . . . . . . . . . . . . 29
• Pause/Frame . . . . . . . . . . . . . . . . . . . . . 29
• Title/Chapter Search . . . . . . . . . . . . . . . 30
• Title/Time Search. . . . . . . . . . . . . . . . . . 30
• Chapter/Time Search. . . . . . . . . . . . . . . 30
• Bookmark. . . . . . . . . . . . . . . . . . . . . . . . 31
•RepeatPlayback..................32
• Repeat A-BPlayback...............32
• Audio Menu . . . . . . . . . . . . . . . . . . . . . . 33
• Subtitle Menu. . . . . . . . . . . . . . . . . . . . . 33
•DVDMenu.......................33
• Title Menu . . . . . . . . . . . . . . . . . . . . . . . 33
• Zoom In . . . . . . . . . . . . . . . . . . . . . . . . . 34
• Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
• Programmed Playback . . . . . . . . . . . . . 35
MP3 Operation ....................36
• Playback of a MP3 Disc . . . . . . . . . . . . 36
• Pause. . . . . . . . . . . . . . . . . . . . . . . . . . . 36
• Random Playback . . . . . . . . . . . . . . . . . 37
• Skip . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
• Search . . . . . . . . . . . . . . . . . . . . . . . . . . 37
• Repeat Playback . . . . . . . . . . . . . . . . . . 38
CD Operation .....................39
• Playback of a CD. . . . . . . . . . . . . . . . . . 39
• Pause. . . . . . . . . . . . . . . . . . . . . . . . . . . 39
• Random Playback . . . . . . . . . . . . . . . . . 40
• Skip . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
• Search . . . . . . . . . . . . . . . . . . . . . . . . . . 40
• Selecting Tracks Using the
Number Buttons. . . . . . . . . . . . . . . . . . . 41
• Repeat Playback . . . . . . . . . . . . . . . . . . 41
Picture CD Operation ..............42
Troubleshooting Guide .............43
Care and Maintenance..............45
Specifications.....................46
1
TABLE OF CONTENTS

2
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL. (This Caution
Marking and Rating Label are located at the bottom enclosure of the unit.)
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
THIS DIGITAL VIDEO DISC PLAYER EMPLOYS A LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS OWNER’S
MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT
REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE
SERVICE PROCEDURE.
USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE
ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE
ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING:
TOREDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
DANGEROUS VOLTAGE:
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
ATTENTION:
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.

3
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications not authorized by the manufacturer may void user’s authority to operate this
device.
FCC CAUTION:
To assure continued compliance, follow the attached installation instructions and use only
shielded cables when connecting to other devices. Also, any changes or modifications not
expressly approved by the party responsible for compliance could void the user’sauthority to
operate the equipment.
ATTENTION:
POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE
DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISES ET POUSSER
JUSQU’AU FOND.
SURGE PROTECTORS:
It is recommended to use a surge protector for AC connection. Lightning and power surges
ARE NOT covered under warranty for this product.
IMPORTANT SAFETY INSTRUCTIONS
LASER WARNING:
This unit employs a laser. Only qualified service personnel should attempt to service this
device due to possible eye injury.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.

Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of
your musical enjoyment. Now it’s time to consider how you can maximize the fun and
excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your equipment
by playing it at a safe level. One that lets the sound come through loud and clear without
annoying blaring or distortion and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After
all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and
the Electronic Industries Association’s Consumer Electronics Group recommend you avoid
prolonged exposure to excessive noise. This list of sound levels is included for your protection.
Decibel
Level Example
30 Quiet library, soft whispers
40 Living room, refrigerator, bedroom away from traffic
50 Light traffic, normal conversation, quiet office
60 Air conditioner at 20 feet, sewing machine
70 Vacuum cleaner, hair dryer, noisy restaurant
80 Average city traffic, garbage disposals, alarm clock at two feet
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90 Subway, motorcycle, truck traffic, lawn mower
100 Garbage truck, chain saw, pneumatic drill
120 Rock band concert in front of speakers, thunderclap
140 Gunshot blast, jet engine
180 Rocket launching pad
Information courtesy of the Deafness Research Foundation.
4
A
S
S
O
C
I
A
T
I
O
N
EST. 1924
E
L
E
C
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
EIA
We
LISTENING
For A Lifetime
Want You
IMPORTANT SAFETY INSTRUCTIONS

5
PRECAUTIONS
NOTES ON HANDLING:
• When shipping the DVD player, always use the original shipping carton and
packing materials. For maximum protection, repack the unit as it was
originally packed at the factory.
• Do not use volatile liquids, such as insect spray, near the DVD player. Do not
leave rubber or plastic products in contact with the DVD player for a long
time. They will leave marks on the finish.
• The top and rear panels of the DVD player may become warm after a long
period of use. This is normal and not a malfunction.
• When the DVD player is not in use, be sure to remove the disc and turn off
the power.
• If you do not use the DVD player for a long period, the unit may not function
properly in the future. Turn on and use the DVD player occasionally.
NOTES ON LOCATING THE DVD PLAYER:
•When you place this DVD player near a TV, radio or VCR, the playback
picture may become poor and the sound may be distorted. In this case, move
the DVD player away from the TV, radio or VCR.
NOTES ON CLEANING:
Use a soft, dry cloth for cleaning.
•For stubborn dirt, soak the cloth in a weak detergent solution, wring well and
wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as
thinner or benzene, as they may damage the surface of the DVD player.
• If you use a chemical-saturated cloth to clean the unit, follow that product’s
instructions.
Warning: Cleaning and adjustment of lenses and/or other components of
playback mechanism should be performed by a qualified service technician.
CAUTION:
To reduce the risk of injury, only charge with supplied rechargeable Battery Pack;
other types of batteries may burst causing personal injury or damage.

6
PRECAUTIONS (CONTINUED)
TO OBTAIN A CLEAR PICTURE:
The DVD player is a high technology, precision device. If the optical pick-up lens
and disc drive parts are dirty or worn down, the picture quality becomes poor. To
obtain a clear picture, we recommend regular inspection and maintenance
(cleaning or parts replacement) every 1,000 hours of use depending on the
operating environment. For details, contact your nearest dealer.
NOTES ON MOISTURE CONDENSATION:
Moisture condensation damages the DVD player. Please read the following
carefully.
•Moisture condensation occurs, for example, when you pour a cold drink into a
glass on a warm day. Drops of water form on the outside of the glass. In the
same way, moisture may condense on the optical pick-up lens inside this unit,
one of the most crucial internal parts of the DVD player.
Moisture condensation occurs during the following cases:
•When you bring the DVD player directly from a cold place to a warm place.
• When you use the DVD player in a room where you just turned on the heater,
or a place where the cold wind from the air conditioner directly hits the unit.
• In summer, when you use the DVD player in a hot and humid place just after
you moved the unit from an air conditioned room.
• When you use the DVD player in a humid place.
Do not use the DVD player when moisture condensation may occur.
• If you use the DVD player in such a situation, it may damage discs and
internal parts. Remove the disc, insert the small end of the AC adapter into
the DC IN jack on the side of the unit and insert the other end into a
conveniently located AC outlet having 120 AC, 60 Hz, turn on the DVD player
and leave it “ON” for two or three hours. After two or three hours, the DVD
player will have warmed up and evaporated any moisture. Keep the DVD
player connected to the wall outlet and moisture condensation will seldom
occur.

AC CONNECTION
Insert the small end of the AC adapter into the
jack on the side of the unit. Insert the other end
(with the 2 blades) into a conveniently located
AC outlet having 120V AC, 60Hz.
AC ADAPTER SPECIFICATIONS:
DC 12V Z
NOTES:
• To disconnect the AC adapter, remove it
from the DC IN jack on the side of the unit as
well as from the AC outlet.
• Use the enclosed AC adapter for this
product only.
CAR CONNECTION
You can connect this unit to a car cigarette lighter by plugging in the Car Cord
(included) into the DC IN jack on the side of this unit and the other side into the car
cigarette lighter socket.
BATTERY PACK INSERTION/REMOVAL
Follow the instructions below to insert or remove the Battery Pack.
7
POWER SOURCES
TO REMOVE: Slide the Battery Release
switch in the direction of arrow A, then slide
the Battery Pack in the direction of arrow B.
A
B
1
TO INSERT: Align connector and tabs from
the Battery Pack into the holes in the unit,
then insert the battery pack.
2
To DC 12V IN Jack

CHARGING THE BATTERY PACK
“Low Battery” will appear on the screen when the battery is low and needs
recharging. See below for how to charge the Battery Pack.
WITH THE BATTERY ATTACHED TO THE UNIT:
With the Battery Pack attached (see previous page), and the unit turned off, insert
the small end of the AC adapter into the DC IN jack on the side of the unit. Insert
the other end (with the 2 blades) into a conveniently-located AC outlet having 120V
AC, 60Hz. The CHARGE indicator will blink red as the battery is charging and will
light solid red when charging has completed. Disconnect the AC adapter plugs
when charging has finished.
NOTES:
• Fully charge the Battery Pack for four hours before using it for the first time. After
the initial charge, it should take approximately four hours to charge.
• A fully-charged Battery Pack can operate for about four hours.
• Charge the Battery Pack at least once every three months, even if you are not
using it.
• The Battery Pack can charge only when the unit is in the OFF mode. To turn this
unit off, simply slide the POWER ON/OFF switch to the OFF position.
8
POWER SOURCES (CONTINUED)

9
LOCATION OF CONTROLS
1
2
12
3
4
9
10
8
5
7
6
11
13
14
15
16
17
18
19
MAIN UNIT
1. Open Door Switch
2. Display
3. TITLE Button
4. STOP (■) Button
5. SETUP Button
6. DC IN Jack 12V z
(AC ADAPTER PART NO.
090E-0001731-00*,
CAR ADAPTER PART NO.
090E-1001731-01*)
7. Skip oButton
8. POWER Indicator
9. DISC COMPARTMENT DOOR
PUSH OPEN Button
10. Remote Sensor
11. DISPLAY Button
12. SCREEN MODE Button
13. MENU Button
14. Skip nButton
15. PLAY/PAUSE (®p) Button
16. OK Button
17. Navigation (π,†,√,®) Buttons
18. POWER ON/OFF Switch
19. CHARGING Indicator
*Consumer Replaceable Part
(See page 44 to order.)

10
LOCATION OF CONTROLS (CONTINUED)
12
VOLUME
VIDEO AUDIOS-VIDEO
AV
OUTIN
1 2 3 4 5 6 7 8
REPEAT
PAUSE/
FRAME STOP
MENUDISPLAY
CLEAR GOTO
SETUP
BOOKMARK ZOOMSLOWTITLE
/OK
A-B PROG RANDOM
AUDIO ANGLE SUBTITLE
12 34
56
90
78
3
2
5
6
7
8
9
10
11
12
13
14
15
116
4
18
17
20
19
21
22
23
25
24
26
27
28
SIDE
REMOTE 1. SLOW Button
2. TITLE Button
3. Number Buttons (0-9)
4. Navigation (π) Buttons
5. DISPLAY Button
6. Navigation (√) Button
7. PLAY (®)/OK Button
8. PAUSE/FRAME Button
9. Navigation (†) Button
10. Skip (n) Button
11. Skip (o) Button
12. Repeat A-B Button
13. REPEAT Button
14. AUDIO Button
15. ANGLE Button
16. SETUP Button
17. BOOKMARK Button
18. ZOOM Button
19. CLEAR Button
20. GOTO Button
21. MENU Button
22. Navigation (®) Button
23. STOP Button
24. Search √√ Button
25. Search ®® Button
26. PROG (Program) Button
27. RANDOM Button
28. SUBTITLE Button
REMOTE CONTROL PART
NO. 086E-3317310-01*
*Consumer Replaceable Part
(See page 44 to order.)
1. VOLUME Control
2. Headphone 1 Jack
3. Headphone 2 Jack
4. VIDEO IN/OUT Jack
5. AUDIO IN/OUT Jack
(AV CABLE PART NO. 070E-1001611-03*)
6. AV IN/OUT Switch
7. S-VIDEO OUT Jack
(S-VIDEO CABLE PART NO.
070E-3501500-00*)
8. RECHARGEABLE BATTERY PACK
(PART NO. BP-MEP1731002*)

11
REMOTE CONTROL
BATTERY INSTALLATION
BATTERY PRECAUTIONS
Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated next to the battery
compartment. A reversed battery may cause damage to the device.
3. If the device is not to be used for a long period of time, remove the battery to prevent damage
or injury from possible battery leakage.
4. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture.
(Follow battery manufacturer’s directions.)
1. Insert a pencil, or other pointy object, into the
groove on the Battery Compartment to help
slide the compartment out.
2. Install a CR2025 battery, paying attention to
the polarity diagram in the Battery
Compartment (positive side up).
3. Replace the Battery Compartment.
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
REPEAT
PAUSE/
FRAME STOP
MENUDISPLAY
CLEAR GOTO
SETUP
BOOKMARK ZOOMSLOWTITLE
/OK
A-B PROG RANDOM
AUDIO ANGLE SUBTITLE
12 34
56
90
78
REPEAT
PAUSE/
FRAME STOP
MENU
DISPLAY
CLEAR GOTO
SETUP
BOOKMARK
ZOOM
SLOW
TITLE
/OK
A-B PROG RANDOM
AUDIO ANGLE SUBTITLE
1234
56
90
78
REPEAT
PAUSE/
FRAME STOP
MENU
DISPLAY
CLEAR GOTO
SETUP
BOOKMARK
ZOOM
SLOW
TITLE
/OK
A-B PROG RANDOM
AUDIO ANGLE SUBTITLE
1234
56
90
78
20ft
NOTES:
•When there is an
obstacle between the
DVD and the transmitter,
the transmitter may not
operate.
•When direct sunlight, an
incandescent lamp,
fluorescent lamp or any
other strong light shines
on the Remote Sensor of
the DVD, the remote
operation may be
unstable.

12
CONNECTION
CONNECTING THE UNIT TO A TV USING THE A/V CABLE
12
VOLUME
VIDEO AUDIO S-VIDEO
AV
OUTIN
NOTES FOR CONNECTING TO A TV:
• If your TV has an S-Video input, connect the DVD player with the S-Video cable
(as described on the next page) for best results.
• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
• When connecting the unit, refer to the owner’s manual of the TV, as well as this
manual.
• When connecting the unit to the TV, make sure the power is off and both units are
unplugged before making any connections.
• Connect the unit to your TV directly. If you connect the unit through a VCR, the
playback picture will be distorted because DVD video discs are copy protected.
• Slide the AV IN/OUT switch to the OUT position.

13
CONNECTION (CONTINUED)
CONNECTING THE DVD TO A TV USING THE S-VIDEO CABLE
12
VOLUME
VIDEO AUDIO S-VIDEO
AV
OUTIN
NOTES FOR CONNECTING TO A TV:
• The TV must have an S-Video IN jack.
• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
•When connecting the unit, refer to the owner’s manual of the TV, as well as
this manual.
•When connecting the unit to the TV, make sure the power is off and both units are
unplugged before making any connections.
•Connect the unit to your TV directly. If you connect the unit through a VCR, the
playback picture will be distorted because DVD video discs are copy protected.
• Slide the AV IN/OUT switch to the OUT position.

14
CONNECTION (CONTINUED)
CONNECTING ANOTHER UNIT TO THIS DVD PLAYER
12
VOLUME
VIDEO AUDIO S-VIDEO
AV
OUTIN
NOTES FOR CONNECTING:
•When connecting the DVD, refer to the owner’s manuals of the TV and stereo
system, as well as this manual.
• When connecting the DVD, make sure the power is off and all units are unplugged
before making any connections.
• Slide the AV IN/OUT switch to the IN position.

15
ABOUT DISCS
PLAYABLE DISCS:
The following discs can be played back on this DVD player:
The region number for this DVD Player is:
See the following page for information regarding region numbers.
DISC TYPES:
DVD
Data on most DVDs is divided into sections
called “titles” and then into subsections called
“chapters”, each of which is given a title or
chapter number. Some features of this DVD
player will not operate with some DVD discs
as they are preset. If a function you selected
does not run as desired, refer to the manual
accompanying the DVD disc.
AUDIO CD
Data on an audio CD is divided into sections
called “tracks”, each of which is given a track
number.
MP3
When playing an MP3, the selected file will appear in the display and will list the
folders/tracks.
MP3 is the abbreviation of “MPEG1 Audio Layer 3”. MPEG Audio is a format that
compresses the audio portion only.
IMPORTANT NOTES:
Due to many variables, including recording condition, type of disc, writing software,
etc., this unit does not guarantee playback of all MP3 discs.
IMPORTANT:
It is important that you read the manual that accompanies the DVD disc, as there
are features that are on the DVD player that cannot be used with certain DVDs.
There are also extra features on the DVD disc that are different for each DVD disc,
so they are not explained in this owner’s manual.

Notes on Copyright:
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public
and rent copyrighted material without permission. DVD video discs are copy
protected, and any recordings made from these discs will be distorted. This product
incorporates copyright protection technology that is protected by method claims of
certain U.S. patents and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended for home and other
limited viewing uses only, unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Region Management Information:
This DVD Player is designed and manufactured to respond to the Region
Management Information that is recorded on a DVD disc. If the Region number
described on the DVD disc does not correspond to the Region number of this DVD
player, this DVD player cannot play that disc. You may not be able to play back
some DVD video discs on this player if they were purchased from outside your
geographic area or made for business purposes. When you try to play back an
unauthorized disc, "Wrong Region" appears on the TV screen.
16
ABOUT DISCS (CONTINUED)

The Setup menu lets you customize the DVD player by allowing you to select various
language preferences, turn screen saver on and off, adjust what type of television
screen you have and more.
Use the following instructions to navigate and change the options as described on the
upcoming pages.
1. While in the Stop mode, press the SETUP
button 1to enter the Setup menu.
2. Select one of the Setup icons at the top of
the screen using the Navigation (√,®)
buttons 2,then press the PLAY (®)/OK
button 3to select it.
3. Use the Navigation (π,†) buttons 2to
select one of the Setup options, then press
the PLAY (®)/OK button 3to select it.
4. Use the Navigation (π,†) buttons 2to
change the desired setting, then press the
PLAY (®)/OK button 3to make
the change.
5. To return to the previous menu, simply
press the Navigation (√) button 2.Exit by
pressing the SETUP button 1again.
(NOTE: You can also exit by selecting the Exit Setup menu icon.)
17
SETUP MENU
REPEAT
PAUSE/
FRAME STOP
MENUDISPLAY
CLEAR GOTO
SETUP
BOOKMARK ZOOMSLOWTITLE
/OK
A-B PROG RANDOM
AUDIO ANGLE SUBTITLE
12 34
56
90
78
2
1
3

18
SETUP MENU (CONTINUED)
Pan Scan: Video material formatted in the Pan
Scan style is played back in that style (the left
and right edges are cut off).
Letterbox: Wide-screen images are shown
on the screen with a black band at the top
or bottom.
Wide: Select when the unit is connected to a
wide-screen TV.
-- General Setup Page --
TV Display Wide
Ntsc
On
On
Off
Eng
TV Type
Angle Mark
OSD Lang
Screen Saver
Last Memory
TVG
1
NTSC: Select when using an NTSC TV.
PAL: Select when using a PAL TV.
IMPORTANT:In the USA, the standard is
NTSC.
-- General Setup Page --
TV Display Wide
Ntsc
On
On
Off
Eng
TV Type
Angle Mark
OSD Lang
Screen Saver
Last Memory
TVG
1
GENERAL SETUP MENU:
Press the SETUP button to enter the menu, select GENERAL SETUP using the Navigation
(√,®)buttons, then press the PLAY (®)/OK button to select it. Select/change the Setup option
as described on page 17.
TV DISPLAY TV TYPE
Some discs may contain scenes which have
been shot simultaneously from a number of
different camera angles. This feature only
works on discs with more than one camera
angle. The jacket will be marked with “ ”.
Turn this option ON to enable camera angles.
-- General Setup Page --
TV Display Wide
Ntsc
On
On
Off
Eng
TV Type
Angle Mark
OSD Lang
Screen Saver
Last Memory
TVG
1
Select the desired language (ENGLISH,
FRENCH, GERMAN, SPANISH OR
ITALIAN) for the On-Screen display to
display text. Note that the DVD must have
the language included in order to display it.
-- General Setup Page --
TV Display Wide
Ntsc
On
On
Off
Eng
TV Type
Angle Mark
OSD Lang
Screen Saver
Last Memory
TVG
1
ANGLE MARK OSD LANGUAGE

19
SETUP MENU (CONTINUED)
When this option is set to ON, the screen
saver will come on when the unit stops for
approximately three minutes.
When this option is OFF, the screen saver
will not come on.
-- General Setup Page --
TV Display Wide
Ntsc
On
On
Off
Eng
TV Type
Angle Mark
OSD Lang
Screen Saver
Last Memory
TVG
1
When this option is set to ON, during
playback of a DVD, if you change the unit to
another source (i.e. switch to AV OUT),
when you playback the disc again, it will
resume to the last segment before
changed/stopped. However, if the disc is
changed, there will be no Last Memory
function and it will just playback the disc
from the beginning.
When this option is OFF,the segment will
not be saved.
-- General Setup Page --
TV Display Wide
Ntsc
On
On
Off
Eng
TV Type
Angle Mark
OSD Lang
Screen Saver
Last Memory
TVG
1
SCREEN SAVER LAST MEMORY
LT/RT: Select to hear the sound in theatrical
downmix mode.
STEREO: Select to hear the sound in
stereo downmix mode.
-- Audio Setup Page --
Downmix Str
TVG
1
DOWNMIX
AUDIO SETUP MENU:
Press the SETUP button to enter the menu, select AUDIO SETUP using the Navigation (√,®)
buttons, then press the PLAY (®)/OK button to select it. Select/change the Setup option as
described on page 17.