Menda 35851 User manual

Figure 1: The Mega Vac, Item 35851
Description
The Menda 35851 Mega Vac is a high capacity, high
performance, service vacuum. This model has been
specifically designed with large clean-up jobs in mind.
The powerful by-pass motor can handle almost any job.
It was designed for those technicians who require a
large, mobile vacuum for use in and around sensitive
electronic equipment such as copy centers, telecom
centers, rechargers, garages, refiners, shops, and
schools. The standard 0.3 micron filter canister is ideal
for dust, glass, pollens, soot, drywall dust, brake dust,
toner, and other fine particles. The optional .12 micron
HEPA filter canister is suitable for lead and other ultra-
fine particles. The filters are fully contained for safe,
easy disposal.
The Mega Vac is safe for ESD susceptible electronics.
The 10' long hose and the utensils are static dissipative.
The internal ground-wire in the flex-hose and enclosure,
virtually eliminate static charge generation from the
utensils. Any charge generated is safely dissipated
back through the electrically grounded motor.
Note: The Menda Mega Vac is designed for commercial
use only.
Inspection:
Remove the Mega Vac from the shipping carton and
inspect for exterior damage.
TB-4004 9/01 Page 1 of 2
Mega Vac Commercial Vacuum
Operation and Maintenance
TECHNICAL BULLETIN TB-4004
Items included with model 35851:
1 0.3 Micron 5 Gallon Filter Canister
1 10' Flex-Hose (Toner Proof and Static Dissipative)
1 Goose Neck Attachment
1 Crevice Attachment
1 Crevice Attachment Brush
1 Detachable Power Cord (110V Only)
1 Base With Easy Rollers
1 Foot Switch
Figure 2: Items included with Model 35851
Optional Accessories
35858 Replacement 0.3 Micron Filter Canister
35859 Replacement .12 Micron HEPA Filter Canister
Operation
Place the vacuum head
onto the filter canister by
inserting the white down
tube into the correspond-
ing size hole in the filter
canister (fig. 3). Align the
rubber retaining clips with
the corresponding chrome
retainer latches on the
vacuum head and stretch
into place (fig. 4). Place
the head and canister into
the mobile base. Insert
either end of the flex hose
into the knurled aluminum
recepticle on the top of the
vacuum head (fig. 5).
Made in America
3651 Walnut Avenue, Chino, CA 91710
Phone: [phone] • Fax [phone] • Web Site: www.mendapump.com
Figure 3: Aligning down
tube

Figure 4: Align retaining clips
Figure 5: Insert hose into receptacle
Insert the female end of the power cord into the power
receptacle on the vacuum head. Plug the power cord
into an electrical outlet that is properly grounded in
accordance with all local codes and ordinances. The
power switch is located on the top of the vacuum head.
Select an appropriate attachment for the job and the
Mega Vac is now ready to operate.
Figure 6: Using foot switch
Foot Switch Operation
Unplug the Mega Vac from the power source. Leave the
standard power cord plugged into the receptacle on the
vacuum head. Plug the male end of the power cord into
3651 Walnut Avenue, Chino, CA 91710
Phone: [phone] • Fax [phone] • Web Site: www.mendapump.com
TB-4004 Page 2 of 2
DESCO INDUSTRIES INC.
Employee Owned
Limited Warranty
Menda expressly warrants that for a period of one (1) year from
the date of purchase, Menda Mega Vacs will be free of defects in
material (parts) and workmanship (labor). Within the warranty
period, the product will be tested, repaired, or replaced at
Menda’s option, free of charge. Call our Customer Service
Department at
909-627-2453 for a Return Material Authorization
(RMA) and proper shipping instructions and address. Include a
copy of your original packing slip, invoice, or other proof of
purchase date. Any unit under warranty should be shipped
prepaid to the Menda factory. Warranty repairs will take
approximately two weeks.
If your unit is out of warranty, call Customer Service at
909-627-
2453
for a Return Material Authorization (RMA) and proper
shipping instructions and address. Menda will quote repair
charges necessary to bring your unit up to factory standards.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU
OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED AND
IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY
DISCLAIMED. The express warranty will not apply to defects or
damage due to accidents, neglect, misuse, alterations, operator
error, or failure to properly maintain, clean or repair products.
Limit of Liability
In no event will Menda or any seller be responsible or liable for
any injury, loss or damage, direct or consequential, arising out of
the use of or the inability to use the product. Before using, users
shall determine the suitability of the product for their intended
use, and users assume all risk and liability whatsoever in
connection therewith.
the female end of the foot switch power cord, and the
male end into the 120 VAC electrical receptacle. You
are now ready for footswitch operation.
Filter Change-Out Instructions
Remove the power cord from the electrical power
source. Unfasten the rubber retaining clips from the
vacuum head and filter canister. Lift the vacuum head
from the filter canister and set aside. Place the filter
canister lid securely on the filter and dispose of in a
proper manner. Place the vacuum head on the new filter
making sure to align the rubber retaining clips with the
retaining latches. If they do not line up properly, unsnap
the metal band latch on the filter and rotate the band
until they lineup, then secure the band.