MENU JWDA User manual

JWDA Table Lamp, Portable
by Jonas Wagell

2MENU
Congratulations on your new JWDA
Table Lamp, Portable designed by
Jonas Wagell.
We hope you will enjoy using this
lamp and follow these instructions to
ensure correct installation.
These instructions are provided for
your safety. It is important that the
instructions are read carefully and
completely before mounting.

3ASSEMBLY INSTRUCTIONS
COMPONENT OVERVIEW
1 x Lamp Shade 1 x G4 Bulb1 x Base 1 x Charger
IMPORTANT INFORMATION
CAUTION
Please ensure that all assembly is done on a so and flat surface, to ensure that the compo-
nents will not be damaged/scratched.
Please check the specific rules for electrical installation work in your country. Some coun-
tries may require an authorised electrical contractor.
If you have any problems regarding the electrical installation, contact a certified electrician.
The external flexible cable or cord of this luminaire cannot be replaced. If the external
flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF; EITHER
THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS TURNED OFF.
CARE AND MAINTENANCE
Please see care instructions on www.menuspace.com

TECHNICAL SPECIFICATIONS
Bulb included G4-CR”, 1,5 W, 12 V, energy efficieny: G
Dimmable, power adaptor 100-240V, G4 socket
Re-chargeable baery
LIGHT SPECIFICATIONS
Color temperature: 2500 K
RA > 80
Lumen: 165 lm
4MENU

5ASSEMBLY INSTRUCTIONS