Mercury 1st Mate Specification sheet

Operation and Installation
Manual
© 2021 Mercury Marine 1ST MATE
8M0159020 920 eng

eng

Declaration of Conformity
Mercury Marine declares that under our sole responsibility the following
products to which this declaration relates are in conformity with the
requirements of the following EU Directives:
Directives
2014/35/EU The Low Voltage Directive
2014/53/EU Radio Equipment Directive (RED)
2011/65/EU RoHS Directive
Equipment ‑ MOB Link Safety HUB
Marketed as 1st Mate HUB
Model number F3501
FCC ID 2AFOZF3501
IC 2AFOZ‑F3501
Equipment ‑ MOB Safety FOB
Marketed as 1st Mate FOB
Model number F3502
FCC ID 2AFOZF3502
IC 2AFOZ‑F3502
The following harmonized standards and normative documents are those
to which the products conformance is declared, and by specific reference
to the essential requirements of the referenced directives.
eng i

EU / EMEA
Health & Safety (Article 3.1(a)
of the RED)
EN 60950‑1:2006 + A11:2009 + A1:2010+
A12:2011 + A2:2013
EN 62368‑1: 2014/A11:2017
EN 62311: 2008
EMC (Article 3.1(b) of the
RED)
EN 301 489‑1 v2.2.0
EN 301 489‑17 v3.2.0
EN 55032:2015 + AC:2016
EN 55024:2010
EN 61000‑3‑2:2014
EN 61000‑3‑3:2013
Spectrum (Article 3.2 of the
RED)
EN 300 328 v2.1.1
EN 301 893 v2.1.1
Equipment within Certain Categories or Classes
(Article 3.3 of the RED)
N/A
RoHS Directive, 2011/65/EU EN 50581:2012
United States / Canada
FCC Rules and Regulations Part 15 Subpart C Section 15.247
ANSI C63.10: 2013
RSS‑247 Issue 2: February 2017
RSS‑Gen Issue 5 April 2018
American Boat and Yacht Council (ABYC) A‑33
Authorized Representative in the EU:
Name of authorized representative: Brunswick Marine in EMEA Inc.
Address: Parc Industriel de Petit‑Rechain
Town: Verviers Post Code: B‑4800 Country: Belgium
I, the undersigned, hereby declare that the equipment specified above
conforms to the above Directive and standards for CE Marking for sale in the
European Community.
ii eng

Name / function:
Christopher D. Drees, President,
Mercury Marine
Date and place of issue:
June 03, 2020
Fond du Lac, Wisconsin, USA
Welcome
You have selected one of the finest marine accessories available. It
incorporates numerous design features to ensure operating ease and durability.
This manual contains specific instructions for using and maintaining your
product.
Thank you for purchasing one of our products. We sincerely hope your boating
will be pleasant!
Mercury Marine
Fond du Lac, Wisconsin, U.S.A.
Read This Manual Thoroughly
IMPORTANT: If you do not understand any portion of this manual, contact the
1st Mate support team using the link provided in the Help section of this
manual.
Copyright and Trademark Information
© MERCURY MARINE. All rights reserved. Reproduction in whole or in
part without permission is prohibited.
Alpha, Axius, Bravo One, Bravo Two, Bravo Three, Circle M with Waves Logo,
K‑planes, Mariner, MerCathode, MerCruiser, Mercury, Mercury with Waves
Logo, Mercury Marine, Mercury Precision Parts, Mercury Propellers, Mercury
Racing, MotorGuide, OptiMax, Quicksilver, SeaCore, Skyhook, SmartCraft,
Sport‑Jet, Verado, VesselView, Zero Effort, Zeus, #1 On the Water and We're
Driven to Win are registered trademarks of Brunswick Corporation. Pro XS is a
trademark of Brunswick Corporation. Mercury Product Protection is a registered
service mark of Brunswick Corporation.
eng iii

eng iv

Components
The 1st Mate Hub............................................................................................... 1
Indicator Lights................................................................................................... 1
Hub Indicator Light Table.................................................................................... 2
1st Mate Antenna................................................................................................2
NFC Chip and RFID Sensor............................................................................... 2
Reset button....................................................................................................... 3
Fobs.................................................................................................................... 3
Insert Battery in FOB/S....................................................................................... 4
Wearables...........................................................................................................4
Important Safety Information.............................................................................. 5
App Download.................................................................................................... 5
Setup
Register New Account........................................................................................ 6
Vessel Setup.......................................................................................................6
Pair Devices........................................................................................................ 6
System Test........................................................................................................ 7
Optional Distress Messaging.............................................................................. 7
Optional Theft‑Deterrent System........................................................................ 7
Features and Operation
Connecting..........................................................................................................9
Operation.......................................................................................................... 10
Man Overboard (MOB)..................................................................................... 10
App Menu......................................................................................................... 13
Fob Light and Hub Horn Tables
Fob Light and Hub Horn Tables........................................................................ 15
Important Information
Help.................................................................................................................. 20
Technical Specifications................................................................................... 20
For Products Sold in the US/CAN..................................................................... 21
eng v

eng vi

The 1st Mate Hub
The 1st Mate hub is mounted in the vessel's console or in an interior
compartment that is protected from the elements. NMEA network, power, and
remote antenna connections are located on the hub. The 1st Mate hub is
powered by battery power from the vessel's key switch circuit. A NMEA
network is not required for operation. The hub uses a dedicated marine
wireless protocol to communicate with wearable devices (fobs) that are worn by
the driver and each passenger.
a - NFC chip
b - RFID sensor
c - Reset button
d - Hub indicator lights
Indicator Lights
Hub lights provide a visual indication of the 1st Mate system status. A flashing
red light on any of the five systems indicates that there is a fault in the
corresponding system.
TDS ‑ If the vessel is equipped with an enabled security system. The TDS light
will be green when the system is unlocked and blue when the system is locked.
Fob ‑ When fobs are paired with the hub, the fob light will be green. The fob
light will turn solid red and the warning horn will beep if a MOB incident occurs.
NMEA ‑ If the vessel is equipped with a connected National Marine Electronics
Association (NMEA) network the NMEA light will be green.
SmartCraft ‑ If the vessel is equipped with a connected Mercury SmartCraft
network the SmartCraft light will be green.
71012
c
ad
b
COMPONENTS
eng 1

Wireless ‑ A green light indicates that the 1st Mate wireless network is
enabled. A flashing green light indicates that the wireless network is waiting to
pair with a fob.
Hub Indicator Light Table
Indicator
Light
Off/No
Data Waiting On Status Change Fault
TDS > > > > > > >
Fob > > > > > > >
NMEA > > > > > > > > > >
SmartCraft > > > > > > > > > >
Wireless > > > > >
1st Mate Antenna
The 1st Mate system is equipped with a small antenna for wireless
communication with 1st Mate devices. The antenna is connected to the 1st
Mate hub and is usually located in an interior compartment or console. In some
cases it may be necessary to reorient or relocate the antenna to improve
performance. Refer to IMPORTANT INFORMATION and the 1st Mate Kit
installation instructions for more information about antenna installations.
71234
1st Mate antenna
NFC Chip and RFID Sensor
Tap the radio‑frequency identification (RFID) sensor with the near‑field
communication (NFC) chip to unlock the theft‑deterrent system (TDS) if an
active fob or the app is not available. The NFC chip is used for anti‑theft
authentication and system override functions.
COMPONENTS
2 eng

Reset button
The reset button located on the front of the hub can be used to reset the
system after a man overboard event or to simultaneously stop all engines (hold
for 3 seconds).
Fobs
a - On/Off/Reset button
b - MOB light
c - On light
d - Fob battery status
CAPTAIN'S FOB
A small wearable wireless device for the vessel operator that can be worn on a
wristband or on a carabiner clip. MOB and ON lights indicate connection status.
The Captain's fob includes an On/Off/Reset button that will turn the system
off, activate the system, or reset the system after an overboard event. The
engine(s) will immediately stop if the driver wearing the fob is ejected into the
water. If present, connected passengers are notified and recovery coordinates
are provided on their personal mobile displays.
PASSENGER FOB
The passenger fob is a small wearable device for the vessel passengers. It can
be worn on a wristband or on a carabiner clip. The system will support one fob
per passenger, for up to seven. MOB and ON lights indicate connection status.
When an overboard event occurs, the position is marked, the captain and other
connected passengers are notified, and are provided with recovery coordinates
on their personal mobile displays.
69454
a
d
b
c
COMPONENTS
eng 3

Insert Battery in FOB/S
1. Use a coin to turn the fob battery cover counterclockwise and remove the
cover.
a - Cover with coin slot
b - O‑ring
c - CR2430 battery
d - Fob assembly
2. Install the fob battery with the + positive side of the battery facing the
cover.
3. Inspect the fob battery cover to ensure that an O‑ring is installed and turn
the cover clockwise to install the battery and seal the fob.
Wearables
Insert each fob into a wrist strap or carabiner clip.
WRIST STRAP
Secure the wrist strap.
a - Captain's or passenger fob
b - Wrist strap
a
b
c
70936
b
d
a
b
71206
COMPONENTS
4 eng

CARABINER CLIP
Fasten the carabiner clip to a belt loop or personal flotation device.
a - Captain's or passenger fob
b - Carabiner clip
Important Safety Information
Refer to the engine's Operation and Maintenance Manual for important
information about the vessel's lanyard stop switch and other safe boating
recommendations. 1st Mate is not a replacement for safety lanyards or
personal flotation devices.
App Download
Download the 1st Mate app from a preferred app store and follow the
instructions for new account registration. The app is required to setup the 1st
Mate system.
71207
a
b
COMPONENTS
eng 5

Register New Account
70916
IMPORTANT: Verify that the Wireless green indicator light on the hub is
flashing.
If the Wireless green indicator light is not flashing, check the power harness
connections. Use the app's onscreen touchpoint feature to access the hub
Installation Instructions for more information.
Vessel Setup
• Enter vessel name and picture.
• Select boat type.
• Select engine manufacturer.
• Select engine type.
• Select Horse Power rating.
• Select number of engines.
• Save
Pair Devices
Refer to the pairing instructions provided in the 1st Mate app for initial device
pairing.
1. Pair each device:
• 1st Mate hub
• Captain's fob
SETUP
6 eng

• Passenger fob/s
2. Accept any available device updates.
System Test
To test the system, go to Vessel Settings.
• Test Wireless Connection
• Test E‑Stop
Optional Distress Messaging
Distress messaging can be enabled or disabled in the App Settings menu.
Open the Emergency Contacts tile located in the main menu to manually
enter or import the contact information for contacts that should be notified in the
event of an emergency.
Tap the Distress Message icon to enable distress messaging. This feature
notifies contacts if a man overboard event occurs.
71247
Optional Theft‑Deterrent System
1. Select a four digit PIN or Face ID located below the main menu in the My
Account dropdown.
• TDS PIN/Face ID
SETUP
eng 7

• Enable Face ID
• Change TDS App PIN
2. Tap the TDS lock icon to lock or unlock the engine(s) and prevent
unauthorized use. Engine RPM will be limited to idle speed when TDS is
enabled.
71251
3. Turn the TDS system on or off in the App Settings menu.
SETUP
8 eng

Connecting
One short beep accompanied by a green blinking fob light indicates that the fob
is paired and connected.
IMPORTANT: Turn on Fob Auto Connect in the fob settings menu.
1. Press the power button on the Captain's fob.
•A single beep indicates that the Captain's fob is connected and ready
for use.
•The green Fob Status Icon on the app screen indicates that the
Captain's fob is connected.
•All paired Passenger fobs will automatically connect.
•A full green Fob Status Icon indicates that the Captain's fob and one
or more Passenger fobs are connected
71246
Green semi circle Full green circle
2. Operate the boat.
3. Exit Boat/Disconnect.
•Press the power button on the Captain's fob to disconnect after
boating activities are finished, i.e. when trailering or leaving the vessel
at the end of the day.
FEATURES AND OPERATION
eng 9

IMPORTANT: Pressing the power button on the Captain's fob while operating
the boat will activate ESTOP and immediately turn the engine(s) off.
Operation
1. After boarding the vessel, firmly press the On/Off/Reset button on the
Captain's fob to turn the 1st Mate system on or off.
2. Tap the Captain half of the Fob Status Icon to open the fob settings
menu and adjust FOB LED Brightness.
71249
Man Overboard (MOB)
If the Captain wearing a fob falls overboard:
1. The engine(s) stop when the fob is submerged in the water.
2. An audible horn from the mobile device app and the vessel's hub will
sound.
3. The location is marked on the app's GPS screen.
4. Alerts are sent to the contacts on the app's emergency contact list, and
fobs of connected passengers.
FEATURES AND OPERATION
10 eng

5. Coordinates are only sent to emergency contacts in the form of a text
message. Devices with the app that are within Bluetooth range will
receive a notification from the app.
70948
Captain overboard screen
If a Passenger wearing a fob falls overboard:
1. An audible horn from the mobile device app and the vessel's hub will
sound.
2. The location is marked on the app's GPS screen.
3. Alerts are sent to the contacts on the app's emergency contact list, the
captain's fob, and fobs of connected passengers.
4. Coordinates are only sent to emergency contacts in the form of a text
message. Devices with the app that are within Bluetooth range will
receive a notification from the app.
MAN OVERBOARD (MOB) MONITORING
IMPORTANT: MOB with Gear in Neutral is enabled/disabled in the Vessel
Settings Menu.
If a man overboard event occurs:
1. Recover the passenger or driver.
FEATURES AND OPERATION
eng 11

2. Tap the Cancel button and cancel the distress message after passenger
recovery.
3. Tap Cancel Man Overboard.
71252
4. A man overboard event can also be canceled by pressing the power
button on the Captain's fob or by pressing the On/Off/Reset on the 1st
Mate Hub.
FEATURES AND OPERATION
12 eng