Meridian Distributor 1 User manual

Distributor 1
Designed and made in England by Meridian Audio Limited
Registered Design ® and Copyright © 2016
Distributor 1 Safety.
P80866
Important safety instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Only use attachments/accessories specified by the
manufacturer.
Unplug this apparatus during lightning storms or
when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
•
•
•
•
•
•
•
•
•
•
•
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
Safety warnings
Do not expose the unit to dripping or splashing.
Do not place any object filled with liquid, such as a
vase, on the unit.
Do not place naked flame sources, such as lighted
candles, on theunit.
To avoid overheating leave at least 10cm around the
equipment to ensure sufficient ventilation.
Do not position the unit in direct sunlight, near heat
sources such as a radiator, or directly on top of heat
producing equipment, such as a power amplifier.
To avoid interference do not position the unit near
strong electrical or magnetic radiation, such as near
a power amplifier.
•
•
•
•
•
•
Radio interference
FCC Warning: This equipment generates and can
radiate radio frequency energy and if not installed and
used correctly in accordance with our instructions may
cause interference to radio communications or radio and
television reception. It has been type-tested and complies
with the limits set out in Subpart J, Part 15 of FCC rules
for a Class B computing device. These limits are intended
to provide reasonable protection against such interference
in home installations.
EEC: This product has been designed and
type-tested to comply with the limits set out in
EN55013 and EN55020.
Copyright
Meridian Audio Ltd
Latham Road
Huntingdon
Cambridgeshire
PE29 6YE
England
Copyright © 2016 Meridian Audio Ltd.
This guide was produced by:
Human-Computer Interface Ltd,
http://www.interface.co.uk/
Page 01

Option 1
Option 2
Option 3
Distributor 1
Designed and made in England by Meridian Audio Limited
Registered Design ® and Copyright © 2016
Distributor 1 Mounting Options.
Option 1 & 2
Bracket Mounting
Attach the mounting
brackets to the unit
as shown. Choose
best orientation for
required mounting
position/orientation.
Brackets and Bracket
Screws are provided.
Fixings to secure
unit to mounting
surface are NOT.
Suitable also for
VESA mounting
Option 3
For free-standing use,
set mounting brackets
aside and attach
four self-adhesive
rubber feet provided.
P80866
Page 02