4
The Distributor 3 is covered by warranty to be free
from defects in materials and workmanship for two
years from the date of purchase; subject to the
limitations and conditions outlined below. This warranty
covers the cost of labour and materials for any repair
deemed necessary by the Meridian Service Team.
Proof of purchase or a copy of the sales receipt will be
required for any claim made against the warranty.
Limitations and Conditions
The Distributor 3 is covered under the warranty only if
the following conditions have been met:
It has been used in accordance with the instructions
given in the section
Important safety instructions
elsewhere in this document.
It has not been altered or modified in any way.
It has not been purchased from an unauthorised
dealer.
•
•
•
It has not been subjected to an unauthorised repair
or service.
In order to make a claim against the warranty, the
approved process for returning a faulty unit for repair
or replacement must be followed. Details of this
process can be found on the Meridian web site:
meridian-audio.com/support
Product Registration
Register your Distributor 3 product at:
meridian-audio.com/support
and receive Exclusive Meridian News and discover
more about the Meridian Collection.
•
Warranty and product registration
The Distributor 3 is supplied with the following
accessories:
2 x rack-mounting ears and pan-head screws.
This manual.
If any of these items are missing please contact
your dealer.
Mounting options
To mount the Distributor 3 for access to the
connections from the rear of the rack:
Remove one screw from each side as shown.
Fit the rack-mounting ears to the slots nearest
the front using the supplied pan-head screws:
•
•
•
•
To mount the Distributor 3 for access to the
connections from the front of the rack:
Fit the rack-mounting ears to the slots nearest
the rear using the supplied pan-head screws:
For free-standing use:
Attach the four self-adhesive rubber feet:
•
•
