Merry Pet Room with A View User manual

NOTE:
*Read all instructions before starting
*Do not completely tighten any bolts until the unit is fully
assembled and sitting on a level surface.
MADE IN CHINA
TOOL REQUIRED
Electrical Screwdriver
or
Phillip Screwdriver
H.
Bolt and nut (8 pcs)
I.
Long Screw (10 pcs)
J. Short
Screw (8 pcs)
A.
Front Panel B.
Rear Panel
C.
Side Panels (2) D. Floor Panel
E. Sun Deck Panel
G. Stair Case
F.
Deck Fence
Page 1 v.2
Please check contents before assembly.
Room with A View

MPS002-SW
S
Install Front (A), Rear (B) and Side (C)
Panels with 8 Bolts and Nuts (H).
Place Floor Panel (D) inside the House. Place Sun Deck
Panel (E) on Houseand Secure with 4 Long Screws (I).
Assemble Deck Fence (F) with 6 Long Screws (I). Fasten the Deck Fence (F) to the Sun
Deck Panel (E) with 5 Short Screws (J).
H x 8
I x 4
I x 6
J x 5
Fasten the Staircase(F) to the Sun Deck Panel (E) Fasten the Staircase to the Right Side Panel (C)
with 1 Short Screws(J).
with 2 Short Screws (J).
J x 2
J x 1
1 2
3 4
5 6
v. 2Page 2